[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20100127201741.GA4855@x200>
Date: Wed, 27 Jan 2010 22:17:41 +0200
From: Alexey Dobriyan <adobriyan@...il.com>
To: David Miller <davem@...emloft.net>
Cc: geert@...ux-m68k.org, linux-next@...r.kernel.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] netdev: remove more HAVE_ leftovers
On Tue, Jan 26, 2010 at 04:32:56PM -0800, David Miller wrote:
> From: Alexey Dobriyan <adobriyan@...il.com>
> Date: Tue, 26 Jan 2010 21:17:27 +0200
>
> > On Tue, Jan 26, 2010 at 05:18:17AM -0800, David Miller wrote:
> >> Alexey, please go through at least drivers/net and look at the
> >> other stale references to these HAVE_* macros.
> >
> > My apologies.
> >
> >
> > [PATCH] netdev: remove HAVE_ leftovers
> >
> > Signed-off-by: Alexey Dobriyan <adobriyan@...il.com>
>
> What about HAVE_POLL_CONTROLLER and some other remaining stuff?
Ick, I thought I left some compile breakage :^)
> drivers/net/bnx2.c:#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
> drivers/net/bnx2x_main.c:#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
> drivers/net/ixgbevf/ixgbevf_main.c:#ifdef HAVE_TX_MQ
> drivers/net/ixgbevf/ixgbevf_main.c:#ifndef HAVE_NETDEV_NAPI_LIST
> drivers/net/ixgbevf/ixgbevf_main.c:#ifdef HAVE_NET_DEVICE_OPS
As for HAVE_TX_MQ and HAVE_NETDEV_NAPI_LIST, I have no clue what's going on.
[PATCH] netdev: remove more HAVE_ leftovers
Signed-off-by: Alexey Dobriyan <adobriyan@...il.com>
---
drivers/net/bnx2.c | 4 ++--
drivers/net/bnx2x_main.c | 4 ++--
drivers/net/cassini.c | 2 +-
drivers/net/ixgbevf/ixgbevf_main.c | 18 ------------------
drivers/net/meth.c | 3 ---
drivers/staging/wlags49_h2/wl_netdev.c | 6 ------
6 files changed, 5 insertions(+), 32 deletions(-)
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7668,7 +7668,7 @@ bnx2_change_mtu(struct net_device *dev, int new_mtu)
return (bnx2_change_ring_size(bp, bp->rx_ring_size, bp->tx_ring_size));
}
-#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
+#ifdef CONFIG_NET_POLL_CONTROLLER
static void
poll_bnx2(struct net_device *dev)
{
@@ -8280,7 +8280,7 @@ static const struct net_device_ops bnx2_netdev_ops = {
#ifdef BCM_VLAN
.ndo_vlan_rx_register = bnx2_vlan_rx_register,
#endif
-#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
+#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = poll_bnx2,
#endif
};
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -11731,7 +11731,7 @@ static void bnx2x_vlan_rx_register(struct net_device *dev,
#endif
-#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
+#ifdef CONFIG_NET_POLL_CONTROLLER
static void poll_bnx2x(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
@@ -11755,7 +11755,7 @@ static const struct net_device_ops bnx2x_netdev_ops = {
#ifdef BCM_VLAN
.ndo_vlan_rx_register = bnx2x_vlan_rx_register,
#endif
-#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
+#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = poll_bnx2x,
#endif
};
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -106,7 +106,7 @@
#define cas_page_unmap(x) kunmap_atomic((x), KM_SKB_DATA_SOFTIRQ)
#define CAS_NCPUS num_online_cpus()
-#if defined(CONFIG_CASSINI_NAPI) && defined(HAVE_NETDEV_POLL)
+#ifdef CONFIG_CASSINI_NAPI
#define USE_NAPI
#define cas_skb_release(x) netif_receive_skb(x)
#else
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -3262,7 +3262,6 @@ static void ixgbevf_shutdown(struct pci_dev *pdev)
pci_disable_device(pdev);
}
-#ifdef HAVE_NET_DEVICE_OPS
static const struct net_device_ops ixgbe_netdev_ops = {
.ndo_open = &ixgbevf_open,
.ndo_stop = &ixgbevf_close,
@@ -3278,29 +3277,12 @@ static const struct net_device_ops ixgbe_netdev_ops = {
.ndo_vlan_rx_add_vid = &ixgbevf_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = &ixgbevf_vlan_rx_kill_vid,
};
-#endif /* HAVE_NET_DEVICE_OPS */
static void ixgbevf_assign_netdev_ops(struct net_device *dev)
{
struct ixgbevf_adapter *adapter;
adapter = netdev_priv(dev);
-#ifdef HAVE_NET_DEVICE_OPS
dev->netdev_ops = &ixgbe_netdev_ops;
-#else /* HAVE_NET_DEVICE_OPS */
- dev->open = &ixgbevf_open;
- dev->stop = &ixgbevf_close;
-
- dev->hard_start_xmit = &ixgbevf_xmit_frame;
-
- dev->get_stats = &ixgbevf_get_stats;
- dev->set_multicast_list = &ixgbevf_set_rx_mode;
- dev->set_mac_address = &ixgbevf_set_mac;
- dev->change_mtu = &ixgbevf_change_mtu;
- dev->tx_timeout = &ixgbevf_tx_timeout;
- dev->vlan_rx_register = &ixgbevf_vlan_rx_register;
- dev->vlan_rx_add_vid = &ixgbevf_vlan_rx_add_vid;
- dev->vlan_rx_kill_vid = &ixgbevf_vlan_rx_kill_vid;
-#endif /* HAVE_NET_DEVICE_OPS */
ixgbevf_set_ethtool_ops(dev);
dev->watchdog_timeo = 5 * HZ;
}
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -51,14 +51,11 @@
static const char *meth_str="SGI O2 Fast Ethernet";
-#define HAVE_TX_TIMEOUT
/* The maximum time waited (in jiffies) before assuming a Tx failed. (400ms) */
#define TX_TIMEOUT (400*HZ/1000)
-#ifdef HAVE_TX_TIMEOUT
static int timeout = TX_TIMEOUT;
module_param(timeout, int, 0);
-#endif
/*
* This structure is private to each device. It is used to pass
--- a/drivers/staging/wlags49_h2/wl_netdev.c
+++ b/drivers/staging/wlags49_h2/wl_netdev.c
@@ -1194,9 +1194,7 @@ static const struct net_device_ops wl_netdev_ops =
.ndo_stop = &wl_adapter_close,
.ndo_do_ioctl = &wl_ioctl,
-#ifdef HAVE_TX_TIMEOUT
.ndo_tx_timeout = &wl_tx_timeout,
-#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = wl_poll,
@@ -1270,9 +1268,7 @@ struct net_device * wl_device_alloc( void )
dev->stop = &wl_adapter_close;
dev->do_ioctl = &wl_ioctl;
-#ifdef HAVE_TX_TIMEOUT
dev->tx_timeout = &wl_tx_timeout;
-#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = wl_poll;
@@ -1280,9 +1276,7 @@ struct net_device * wl_device_alloc( void )
#endif // (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,30))
-#ifdef HAVE_TX_TIMEOUT
dev->watchdog_timeo = TX_TIMEOUT;
-#endif
dev->ethtool_ops = &wl_ethtool_ops;
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists