| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <c0233ff5b830b0b050529dd1a750fad6154d0fe5.1264747118.git.joe@perches.com>
Date: Thu, 28 Jan 2010 22:59:27 -0800
From: Joe Perches <joe@...ches.com>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org
Subject: [PATCH 11/13] tulip/uli526x.c: Use dev_<level> and pr_<level>
Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME from logging messages
Add do {} while(0) to ULI526X_DBUG macro
Make SHOW_MEDIA_TYPE macro more readable
Signed-off-by: Joe Perches <joe@...ches.com>
---
drivers/net/tulip/uli526x.c | 46 +++++++++++++++++++++++++-----------------
1 files changed, 27 insertions(+), 19 deletions(-)
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index d549042..dc3335d 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -12,6 +12,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "uli526x"
#define DRV_VERSION "0.9.3"
#define DRV_RELDATE "2005-7-29"
@@ -82,9 +84,16 @@
#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */
#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */
-#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
+#define ULI526X_DBUG(dbug_now, msg, value) \
+do { \
+ if (uli526x_debug || (dbug_now)) \
+ pr_err("%s %lx\n", (msg), (long) (value)); \
+} while (0)
-#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
+#define SHOW_MEDIA_TYPE(mode) \
+ pr_err("Change Speed to %sMhz %s duplex\n", \
+ mode & 1 ? "100" : "10", \
+ mode & 4 ? "full" : "half");
/* CR9 definition: SROM/MII */
@@ -284,7 +293,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
- printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
+ pr_warning("32-bit PCI DMA not available\n");
err = -ENODEV;
goto err_out_free;
}
@@ -295,19 +304,19 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
goto err_out_free;
if (!pci_resource_start(pdev, 0)) {
- printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
+ pr_err("I/O base is zero\n");
err = -ENODEV;
goto err_out_disable;
}
if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {
- printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
+ pr_err("Allocated I/O size too small\n");
err = -ENODEV;
goto err_out_disable;
}
if (pci_request_regions(pdev, DRV_NAME)) {
- printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+ pr_err("Failed to request PCI regions\n");
err = -ENODEV;
goto err_out_disable;
}
@@ -382,9 +391,9 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,
if (err)
goto err_out_res;
- printk(KERN_INFO "%s: ULi M%04lx at pci%s, %pM, irq %d.\n",
- dev->name,ent->driver_data >> 16,pci_name(pdev),
- dev->dev_addr, dev->irq);
+ dev_info(&dev->dev, "ULi M%04lx at pci%s, %pM, irq %d\n",
+ ent->driver_data >> 16, pci_name(pdev),
+ dev->dev_addr, dev->irq);
pci_set_master(pdev);
@@ -516,7 +525,7 @@ static void uli526x_init(struct net_device *dev)
}
}
if(phy_tmp == 32)
- printk(KERN_WARNING "Can not find the phy address!!!");
+ pr_warning("Can not find the phy address!!!");
/* Parser SROM and media mode */
db->media_mode = uli526x_media_mode;
@@ -582,7 +591,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
/* Too large packet check */
if (skb->len > MAX_PACKET_SIZE) {
- printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
+ pr_err("big packet = %d\n", (u16)skb->len);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
@@ -592,7 +601,7 @@ static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
/* No Tx resource check, it never happen nromally */
if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
spin_unlock_irqrestore(&db->lock, flags);
- printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
+ pr_err("No Tx resource %ld\n", db->tx_packet_cnt);
return NETDEV_TX_BUSY;
}
@@ -1058,7 +1067,7 @@ static void uli526x_timer(unsigned long data)
/* Link Failed */
ULI526X_DBUG(0, "Link Failed", tmp_cr12);
netif_carrier_off(dev);
- printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+ pr_info("%s NIC Link is Down\n",dev->name);
db->link_failed = 1;
/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
@@ -1090,11 +1099,11 @@ static void uli526x_timer(unsigned long data)
}
if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
{
- printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
+ pr_info("%s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
}
else
{
- printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
+ pr_info("%s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
}
netif_carrier_on(dev);
}
@@ -1104,7 +1113,7 @@ static void uli526x_timer(unsigned long data)
{
if(db->init==1)
{
- printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+ pr_info("%s NIC Link is Down\n",dev->name);
netif_carrier_off(dev);
}
}
@@ -1230,8 +1239,7 @@ static int uli526x_resume(struct pci_dev *pdev)
err = pci_set_power_state(pdev, PCI_D0);
if (err) {
- printk(KERN_WARNING "%s: Could not put device into D0\n",
- dev->name);
+ dev_warn(&dev->dev, "Could not put device into D0\n");
return err;
}
@@ -1432,7 +1440,7 @@ static void send_filter_frame(struct net_device *dev, int mc_cnt)
update_cr6(db->cr6_data, dev->base_addr);
dev->trans_start = jiffies;
} else
- printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n");
+ pr_err("No Tx resource - Send_filter_frame!\n");
}
--
1.6.6.rc0.57.gad7a
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists