netdev - [PATCH 2.6.33 2/4] net: Kconfig change for KSZ884X driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <14385191E87B904DBD836449AA30269D021A4E@MORGANITE.micrel.com>
Date:	Fri, 29 Jan 2010 14:40:34 -0800
From:	"Ha, Tristram" <Tristram.Ha@...rel.Com>
To:	"Dave Miller" <davem@...emloft.net>
Cc:	<netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 2.6.33 2/4] net: Kconfig change for KSZ884X driver

From: Tristram Ha <Tristram.Ha@...rel.com>

Add Micrel KSZ8841/KSZ8842 PCI Ethernet chip support.

Some users like to use KSZ8842 switch to run Spanning Tree Protocol.  As a result a hardware STP support was implemented so that the host does not waste CPU time forwarding each and every packet.

Signed-off-by: Tristram Ha <Tristram.Ha@...rel.com>
---
This is a resubmission of the Micrel KSZ8841/2 PCI Ethernet driver.

--- linux-2.6.33-rc3.old/drivers/net/Kconfig	2010-01-05 16:02:46.000000000 -0800
+++ linux-2.6.33-rc3.new/drivers/net/Kconfig	2010-01-13 12:17:42.000000000 -0800
@@ -1368,6 +1368,27 @@ config AC3200
 	  To compile this driver as a module, choose M here. The module
 	  will be called ac3200.
 
+config KSZ884X_PCI
+	tristate "Micrel KSZ8841/2 PCI"
+	depends on NET_PCI && PCI
+	select MII
+	select CRC32
+	help
+	  This PCI driver is for Micrel KSZ8841/KSZ8842 PCI Ethernet chip.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ksz884x.
+
+config KSZ8842_STP
+	bool "STP support (EXPERIMENTAL)"
+	depends on KSZ884X_PCI && EXPERIMENTAL
+	help
+	  This enables a feature to aid KSZ8842 running Spanning Tree Protocol.
+	  To actually use it pass the stp=1 parameter to the driver.
+
+	  This feature is experimental and may not work correctly compared to
+	  the Linux bridge using STP.
+
 config APRICOT
 	tristate "Apricot Xen-II on board Ethernet"
 	depends on NET_PCI && ISA
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html