lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20100201091718.GA9849@ff.dom.local>
Date:	Mon, 1 Feb 2010 09:17:19 +0000
From:	Jarek Poplawski <jarkao2@...il.com>
To:	David Miller <davem@...emloft.net>
Cc:	Michael Breuer <mbreuer@...jas.com>,
	Stephen Hemminger <shemminger@...ux-foundation.org>,
	akpm@...ux-foundation.org, flyboy@...il.com,
	linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
	Michael Chan <mchan@...adcom.com>,
	Don Fry <pcnet32@...izon.net>,
	Francois Romieu <romieu@...zoreil.com>,
	Matt Carlson <mcarlson@...adcom.com>
Subject: [PATCH v2] sky2: Fix transmit dma mapping handling

On Sun, Jan 31, 2010 at 07:19:46PM -0500, Michael Breuer wrote:
> On 1/31/2010 5:18 PM, Jarek Poplawski wrote:
>> On Sun, Jan 31, 2010 at 04:58:42PM -0500, Michael Breuer wrote:
>>    
>>> On 1/31/2010 1:50 PM, Michael Breuer wrote:
>>>> I put a printk as a third else case in sky2_tx_unmap. Looks like
>>>> the issue is that a large number (perhaps all) calls to
>>>> sky2_tx_unmap have re->flags set to neither TX_MAP_SINGLE or
>>>> TX_MAP_PAGE. Thus the elements are never being unmapped.
>>>>
>>>> I suspect that the system collapses when using DMAR sooner than if
>>>> not using DMAR. Probably some hardware limitation on the number of
>>>> mapped elements that is less than the software limitation. I don't
>>>> see at present how a ring element can ever get to this code
>>>> without re->flags being set to one or the other.
>>>>
>>>>
>>>>        
>>> Put some more debugging code in... re->flags is always NULL upon
>>> entry to sky2_tx_unmap.
>>>
>>>      
>> Yes, good point! Could you try if this patch can fix it. (not compiled)
...
> Ok- solves the dma-debug issue - i.e., elements are now being unmapped.
>
> Will leave up and hit with traffic unless a crash occurs. If I hit  
> something unrelated I'll backport to 2.6.32.7 and try that for a while.  
> I do think it's plausible that the dma errors after (during) load were  
> due to hardware limitations on the number of mapped entries (haven't  
> researched what that limit was). I would also assume that the sw map  
> would also have failed eventually.
>
> I'd suggest that regardless of whether this patch solves my crash that  
> it ought to be backported as it seems unlikely that any machine would be  
> able to survive for long without the tx entries being unmapped.

Here is a bit improved version (re->flags = 0 in sky2_tx_unmap()) for
merging, or additional testing if David wishes.

Thanks,
Jarek P.
--------------->
Michael Breuer reported that dma-debug entries added by sky2 driver
weren't unmapped, and found out "re->flags is always NULL upon entry
to sky2_tx_unmap". It is overwritten by get_tx_le() after changes
introduced by commit 6b84dacadbdc3dab6a5b313d20d5a93b0d998641.

This patch reorders initializations in get_tx_le() and tx_init(), and
additionally does re->flags zeroing in sky2_tx_unmap() to prevent
possible double unmapping.

With debugging by: Michael Breuer <mbreuer@...jas.com>

Reported-by: Michael Breuer <mbreuer@...jas.com>
Tested-by: Michael Breuer <mbreuer@...jas.com>
Signed-off-by: Jarek Poplawski <jarkao2@...il.com>
---

 drivers/net/sky2.c |   20 +++++++++++++-------
 1 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index d760650..21bb00a 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1025,9 +1025,10 @@ static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
 static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
 {
 	struct sky2_tx_le *le = sky2->tx_le + *slot;
-	struct tx_ring_info *re = sky2->tx_ring + *slot;
+	struct tx_ring_info *re;
 
 	*slot = RING_NEXT(*slot, sky2->tx_ring_size);
+	re = sky2->tx_ring + *slot;
 	re->flags = 0;
 	re->skb = NULL;
 	le->ctrl = 0;
@@ -1036,13 +1037,16 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
 
 static void tx_init(struct sky2_port *sky2)
 {
-	struct sky2_tx_le *le;
+	struct sky2_tx_le *le = sky2->tx_le;
+	struct tx_ring_info *re = sky2->tx_ring;
 
 	sky2->tx_prod = sky2->tx_cons = 0;
 	sky2->tx_tcpsum = 0;
 	sky2->tx_last_mss = 0;
 
-	le = get_tx_le(sky2, &sky2->tx_prod);
+	re->flags = 0;
+	re->skb = NULL;
+	le->ctrl = 0;
 	le->addr = 0;
 	le->opcode = OP_ADDR64 | HW_OWNER;
 	sky2->tx_last_upper = 0;
@@ -1622,17 +1626,19 @@ static unsigned tx_le_req(const struct sk_buff *skb)
 	return count;
 }
 
-static void sky2_tx_unmap(struct pci_dev *pdev,
-			  const struct tx_ring_info *re)
+static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re)
 {
-	if (re->flags & TX_MAP_SINGLE)
+	if (re->flags & TX_MAP_SINGLE) {
 		pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
 				 pci_unmap_len(re, maplen),
 				 PCI_DMA_TODEVICE);
-	else if (re->flags & TX_MAP_PAGE)
+		re->flags = 0;
+	} else if (re->flags & TX_MAP_PAGE) {
 		pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr),
 			       pci_unmap_len(re, maplen),
 			       PCI_DMA_TODEVICE);
+		re->flags = 0;
+	}
 }
 
 /*
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ