[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <4B68F664.6050007@majjas.com>
Date: Tue, 02 Feb 2010 23:07:00 -0500
From: Michael Breuer <mbreuer@...jas.com>
To: Stephen Hemminger <shemminger@...ux-foundation.org>
Cc: Jarek Poplawski <jarkao2@...il.com>,
David Miller <davem@...emloft.net>, akpm@...ux-foundation.org,
flyboy@...il.com, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, Michael Chan <mchan@...adcom.com>,
Don Fry <pcnet32@...izon.net>,
Francois Romieu <romieu@...zoreil.com>,
Matt Carlson <mcarlson@...adcom.com>
Subject: Re: [PATCH] sky2: receive dma mapping error handling
On 2/1/2010 1:20 PM, Stephen Hemminger wrote:
> This fixes the fact that re->flags is always zero without causing
> other confusion.
>
> --- a/drivers/net/sky2.c 2010-02-01 10:07:42.676296236 -0800
> +++ b/drivers/net/sky2.c 2010-02-01 10:18:12.575044064 -0800
> @@ -1025,11 +1025,8 @@ static void sky2_prefetch_init(struct sk
> static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
> {
> struct sky2_tx_le *le = sky2->tx_le + *slot;
> - struct tx_ring_info *re = sky2->tx_ring + *slot;
>
> *slot = RING_NEXT(*slot, sky2->tx_ring_size);
> - re->flags = 0;
> - re->skb = NULL;
> le->ctrl = 0;
> return le;
> }
> @@ -1622,8 +1619,7 @@ static unsigned tx_le_req(const struct s
> return count;
> }
>
> -static void sky2_tx_unmap(struct pci_dev *pdev,
> - const struct tx_ring_info *re)
> +static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re)
> {
> if (re->flags& TX_MAP_SINGLE)
> pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr),
> @@ -1633,6 +1629,7 @@ static void sky2_tx_unmap(struct pci_dev
> pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr),
> pci_unmap_len(re, maplen),
> PCI_DMA_TODEVICE);
> + re->flags = 0;
> }
>
> /*
> @@ -1839,6 +1836,7 @@ static void sky2_tx_complete(struct sky2
> dev->stats.tx_packets++;
> dev->stats.tx_bytes += skb->len;
>
> + re->skb = NULL;
> dev_kfree_skb_any(skb);
>
> sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size);
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Just a brief update - this has been up and stable for about 32 hours -
I've been periodically generating load on the system. No kernel errors
of any sort so far. Actually, in retrospect, I believe the dma issue was
triggering other bad things - including an rcu lockup (patched in tip -
sched.c).
Just as an FYI - (and this should probably be in a new thread) I am
seeing an large number (>9,000,000) of dropped rx packets, however at
this time I see no errors resulting from that (on this or client
machines). As the # of dropped packets hasn't incremented at any time I
was observing things, I can't say what this is about. Probably nothing,
but I'll see if I can track down what is going on. I did see some of
this earlier on while troubleshooting the sky2 issues that now seem
resolved. Quick crosschecking of other machines do not show high error
or retransmission rates. I'm also not seeing any evidence of other
errors (no errors reported by ifconfig, or ethtool, or printk (debug is
enabled).
I'm wondering whether these dropped packets are due mostly to hitting
GMR_FS_RX_OK in sky2_receive. I'm also guessing that the high numbers of
this that I'm seeing is an artifact of being able to pump more traffic
through with the above patch. Given the description of the status code
in sky2.h (receive ok) I'm wondering whether a) this should be reported
as dropped, b) whether resubmit is necessary, c) whether it's possible
that eth1 events coinciding with eth0 events are the cause and d)
whether or not there's another issue entirely.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists