| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <2c1f79787b373df46715348d92b9c1fe76a03b7e.1266893507.git.joe@perches.com>
Date: Mon, 22 Feb 2010 18:57:00 -0800
From: Joe Perches <joe@...ches.com>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
Jesse Brandeburg <jesse.brandeburg@...el.com>,
Bruce Allan <bruce.w.allan@...el.com>,
Alex Duyck <alexander.h.duyck@...el.com>,
PJ Waskiewicz <peter.p.waskiewicz.jr@...el.com>,
John Ronciak <john.ronciak@...el.com>,
e1000-devel@...ts.sourceforge.net, linux-kernel@...r.kernel.org
Subject: [PATCH net-next 4/7] drivers/net/ixgb: Use pr_<level> and netdev_<level>
Convert DEBUGOUTx to pr_debug
Convert DEBUGFUNC to more commonly used ENTER
Convert mac address output to %pM
Use #define pr_fmt
Convert a few printks to pr_<level>
Improve ixgb_mc_addr_list_update: use a temporary for current mc address
Use etherdevice.h functions for mac address testing
Signed-off-by: Joe Perches <joe@...ches.com>
---
drivers/net/ixgb/ixgb.h | 8 ++-
drivers/net/ixgb/ixgb_ee.c | 14 ++--
drivers/net/ixgb/ixgb_hw.c | 147 +++++++++++++++++------------------------
drivers/net/ixgb/ixgb_hw.h | 12 ----
drivers/net/ixgb/ixgb_main.c | 33 ++++-----
drivers/net/ixgb/ixgb_osdep.h | 16 +----
drivers/net/ixgb/ixgb_param.c | 31 ++++-----
7 files changed, 105 insertions(+), 156 deletions(-)
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index 92d2e71..521c0c7 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -78,9 +78,13 @@ struct ixgb_adapter;
#define PFX "ixgb: "
#ifdef _DEBUG_DRIVER_
-#define IXGB_DBG(args...) printk(KERN_DEBUG PFX args)
+#define IXGB_DBG(fmt, args...) printk(KERN_DEBUG PFX fmt, ##args)
#else
-#define IXGB_DBG(args...)
+#define IXGB_DBG(fmt, args...) \
+do { \
+ if (0) \
+ printk(KERN_DEBUG PFX fmt, ##args); \
+} while (0)
#endif
/* TX/RX descriptor defines */
diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c
index 89ffa72..06303a3 100644
--- a/drivers/net/ixgb/ixgb_ee.c
+++ b/drivers/net/ixgb/ixgb_ee.c
@@ -26,6 +26,8 @@
*******************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "ixgb_hw.h"
#include "ixgb_ee.h"
/* Local prototypes */
@@ -467,11 +469,11 @@ ixgb_get_eeprom_data(struct ixgb_hw *hw)
u16 checksum = 0;
struct ixgb_ee_map_type *ee_map;
- DEBUGFUNC("ixgb_get_eeprom_data");
+ ENTER();
ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
- DEBUGOUT("ixgb_ee: Reading eeprom data\n");
+ pr_debug("Reading eeprom data\n");
for (i = 0; i < IXGB_EEPROM_SIZE ; i++) {
u16 ee_data;
ee_data = ixgb_read_eeprom(hw, i);
@@ -480,7 +482,7 @@ ixgb_get_eeprom_data(struct ixgb_hw *hw)
}
if (checksum != (u16) EEPROM_SUM) {
- DEBUGOUT("ixgb_ee: Checksum invalid.\n");
+ pr_debug("Checksum invalid\n");
/* clear the init_ctrl_reg_1 to signify that the cache is
* invalidated */
ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR);
@@ -489,7 +491,7 @@ ixgb_get_eeprom_data(struct ixgb_hw *hw)
if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK))
!= cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) {
- DEBUGOUT("ixgb_ee: Signature invalid.\n");
+ pr_debug("Signature invalid\n");
return(false);
}
@@ -555,13 +557,13 @@ ixgb_get_ee_mac_addr(struct ixgb_hw *hw,
int i;
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
- DEBUGFUNC("ixgb_get_ee_mac_addr");
+ ENTER();
if (ixgb_check_and_get_eeprom_data(hw) == true) {
for (i = 0; i < IXGB_ETH_LENGTH_OF_ADDRESS; i++) {
mac_addr[i] = ee_map->mac_addr[i];
- DEBUGOUT2("mac(%d) = %.2X\n", i, mac_addr[i]);
}
+ pr_debug("eeprom mac address = %pM\n", mac_addr);
}
}
diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c
index ff67a84..cd247b8 100644
--- a/drivers/net/ixgb/ixgb_hw.c
+++ b/drivers/net/ixgb/ixgb_hw.c
@@ -30,9 +30,13 @@
* Shared functions for accessing and configuring the adapter
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "ixgb_hw.h"
#include "ixgb_ids.h"
+#include <linux/etherdevice.h>
+
/* Local function prototypes */
static u32 ixgb_hash_mc_addr(struct ixgb_hw *hw, u8 * mc_addr);
@@ -120,13 +124,13 @@ ixgb_adapter_stop(struct ixgb_hw *hw)
u32 ctrl_reg;
u32 icr_reg;
- DEBUGFUNC("ixgb_adapter_stop");
+ ENTER();
/* If we are stopped or resetting exit gracefully and wait to be
* started again before accessing the hardware.
*/
if (hw->adapter_stopped) {
- DEBUGOUT("Exiting because the adapter is already stopped!!!\n");
+ pr_debug("Exiting because the adapter is already stopped!!!\n");
return false;
}
@@ -136,7 +140,7 @@ ixgb_adapter_stop(struct ixgb_hw *hw)
hw->adapter_stopped = true;
/* Clear interrupt mask to stop board from generating interrupts */
- DEBUGOUT("Masking off all interrupts\n");
+ pr_debug("Masking off all interrupts\n");
IXGB_WRITE_REG(hw, IMC, 0xFFFFFFFF);
/* Disable the Transmit and Receive units. Then delay to allow
@@ -152,12 +156,12 @@ ixgb_adapter_stop(struct ixgb_hw *hw)
* the current PCI configuration. The global reset bit is self-
* clearing, and should clear within a microsecond.
*/
- DEBUGOUT("Issuing a global reset to MAC\n");
+ pr_debug("Issuing a global reset to MAC\n");
ctrl_reg = ixgb_mac_reset(hw);
/* Clear interrupt mask to stop board from generating interrupts */
- DEBUGOUT("Masking off all interrupts\n");
+ pr_debug("Masking off all interrupts\n");
IXGB_WRITE_REG(hw, IMC, 0xffffffff);
/* Clear any pending interrupt events. */
@@ -183,7 +187,7 @@ ixgb_identify_xpak_vendor(struct ixgb_hw *hw)
u16 vendor_name[5];
ixgb_xpak_vendor xpak_vendor;
- DEBUGFUNC("ixgb_identify_xpak_vendor");
+ ENTER();
/* Read the first few bytes of the vendor string from the XPAK NVR
* registers. These are standard XENPAK/XPAK registers, so all XPAK
@@ -222,12 +226,12 @@ ixgb_identify_phy(struct ixgb_hw *hw)
ixgb_phy_type phy_type;
ixgb_xpak_vendor xpak_vendor;
- DEBUGFUNC("ixgb_identify_phy");
+ ENTER();
/* Infer the transceiver/phy type from the device id */
switch (hw->device_id) {
case IXGB_DEVICE_ID_82597EX:
- DEBUGOUT("Identified TXN17401 optics\n");
+ pr_debug("Identified TXN17401 optics\n");
phy_type = ixgb_phy_type_txn17401;
break;
@@ -237,30 +241,30 @@ ixgb_identify_phy(struct ixgb_hw *hw)
* type of optics. */
xpak_vendor = ixgb_identify_xpak_vendor(hw);
if (xpak_vendor == ixgb_xpak_vendor_intel) {
- DEBUGOUT("Identified TXN17201 optics\n");
+ pr_debug("Identified TXN17201 optics\n");
phy_type = ixgb_phy_type_txn17201;
} else {
- DEBUGOUT("Identified G6005 optics\n");
+ pr_debug("Identified G6005 optics\n");
phy_type = ixgb_phy_type_g6005;
}
break;
case IXGB_DEVICE_ID_82597EX_LR:
- DEBUGOUT("Identified G6104 optics\n");
+ pr_debug("Identified G6104 optics\n");
phy_type = ixgb_phy_type_g6104;
break;
case IXGB_DEVICE_ID_82597EX_CX4:
- DEBUGOUT("Identified CX4\n");
+ pr_debug("Identified CX4\n");
xpak_vendor = ixgb_identify_xpak_vendor(hw);
if (xpak_vendor == ixgb_xpak_vendor_intel) {
- DEBUGOUT("Identified TXN17201 optics\n");
+ pr_debug("Identified TXN17201 optics\n");
phy_type = ixgb_phy_type_txn17201;
} else {
- DEBUGOUT("Identified G6005 optics\n");
+ pr_debug("Identified G6005 optics\n");
phy_type = ixgb_phy_type_g6005;
}
break;
default:
- DEBUGOUT("Unknown physical layer module\n");
+ pr_debug("Unknown physical layer module\n");
phy_type = ixgb_phy_type_unknown;
break;
}
@@ -296,18 +300,18 @@ ixgb_init_hw(struct ixgb_hw *hw)
u32 ctrl_reg;
bool status;
- DEBUGFUNC("ixgb_init_hw");
+ ENTER();
/* Issue a global reset to the MAC. This will reset the chip's
* transmit, receive, DMA, and link units. It will not effect
* the current PCI configuration. The global reset bit is self-
* clearing, and should clear within a microsecond.
*/
- DEBUGOUT("Issuing a global reset to MAC\n");
+ pr_debug("Issuing a global reset to MAC\n");
ctrl_reg = ixgb_mac_reset(hw);
- DEBUGOUT("Issuing an EE reset to MAC\n");
+ pr_debug("Issuing an EE reset to MAC\n");
#ifdef HP_ZX1
/* Workaround for 82597EX reset errata */
IXGB_WRITE_REG_IO(hw, CTRL1, IXGB_CTRL1_EE_RST);
@@ -335,7 +339,7 @@ ixgb_init_hw(struct ixgb_hw *hw)
* If it is not valid, we fail hardware init.
*/
if (!mac_addr_valid(hw->curr_mac_addr)) {
- DEBUGOUT("MAC address invalid after ixgb_init_rx_addrs\n");
+ pr_debug("MAC address invalid after ixgb_init_rx_addrs\n");
return(false);
}
@@ -346,7 +350,7 @@ ixgb_init_hw(struct ixgb_hw *hw)
ixgb_get_bus_info(hw);
/* Zero out the Multicast HASH table */
- DEBUGOUT("Zeroing the MTA\n");
+ pr_debug("Zeroing the MTA\n");
for (i = 0; i < IXGB_MC_TBL_SIZE; i++)
IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0);
@@ -379,7 +383,7 @@ ixgb_init_rx_addrs(struct ixgb_hw *hw)
{
u32 i;
- DEBUGFUNC("ixgb_init_rx_addrs");
+ ENTER();
/*
* If the current mac address is valid, assume it is a software override
@@ -391,28 +395,19 @@ ixgb_init_rx_addrs(struct ixgb_hw *hw)
/* Get the MAC address from the eeprom for later reference */
ixgb_get_ee_mac_addr(hw, hw->curr_mac_addr);
- DEBUGOUT3(" Keeping Permanent MAC Addr =%.2X %.2X %.2X ",
- hw->curr_mac_addr[0],
- hw->curr_mac_addr[1], hw->curr_mac_addr[2]);
- DEBUGOUT3("%.2X %.2X %.2X\n",
- hw->curr_mac_addr[3],
- hw->curr_mac_addr[4], hw->curr_mac_addr[5]);
+ pr_debug("Keeping Permanent MAC Addr = %pM\n",
+ hw->curr_mac_addr);
} else {
/* Setup the receive address. */
- DEBUGOUT("Overriding MAC Address in RAR[0]\n");
- DEBUGOUT3(" New MAC Addr =%.2X %.2X %.2X ",
- hw->curr_mac_addr[0],
- hw->curr_mac_addr[1], hw->curr_mac_addr[2]);
- DEBUGOUT3("%.2X %.2X %.2X\n",
- hw->curr_mac_addr[3],
- hw->curr_mac_addr[4], hw->curr_mac_addr[5]);
+ pr_debug("Overriding MAC Address in RAR[0]\n");
+ pr_debug("New MAC Addr = %pM\n", hw->curr_mac_addr);
ixgb_rar_set(hw, hw->curr_mac_addr, 0);
}
/* Zero out the other 15 receive addresses. */
- DEBUGOUT("Clearing RAR[1-15]\n");
+ pr_debug("Clearing RAR[1-15]\n");
for (i = 1; i < IXGB_RAR_ENTRIES; i++) {
/* Write high reg first to disable the AV bit first */
IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
@@ -444,64 +439,50 @@ ixgb_mc_addr_list_update(struct ixgb_hw *hw,
u32 hash_value;
u32 i;
u32 rar_used_count = 1; /* RAR[0] is used for our MAC address */
+ u8 *mca;
- DEBUGFUNC("ixgb_mc_addr_list_update");
+ ENTER();
/* Set the new number of MC addresses that we are being requested to use. */
hw->num_mc_addrs = mc_addr_count;
/* Clear RAR[1-15] */
- DEBUGOUT(" Clearing RAR[1-15]\n");
+ pr_debug("Clearing RAR[1-15]\n");
for (i = rar_used_count; i < IXGB_RAR_ENTRIES; i++) {
IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
}
/* Clear the MTA */
- DEBUGOUT(" Clearing MTA\n");
+ pr_debug("Clearing MTA\n");
for (i = 0; i < IXGB_MC_TBL_SIZE; i++)
IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0);
/* Add the new addresses */
+ mca = mc_addr_list;
for (i = 0; i < mc_addr_count; i++) {
- DEBUGOUT(" Adding the multicast addresses:\n");
- DEBUGOUT7(" MC Addr #%d =%.2X %.2X %.2X %.2X %.2X %.2X\n", i,
- mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad)],
- mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) +
- 1],
- mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) +
- 2],
- mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) +
- 3],
- mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) +
- 4],
- mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad) +
- 5]);
+ pr_debug("Adding the multicast addresses:\n");
+ pr_debug("MC Addr #%d = %pM\n", i, mca);
/* Place this multicast address in the RAR if there is room, *
* else put it in the MTA
*/
if (rar_used_count < IXGB_RAR_ENTRIES) {
- ixgb_rar_set(hw,
- mc_addr_list +
- (i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad)),
- rar_used_count);
- DEBUGOUT1("Added a multicast address to RAR[%d]\n", i);
+ ixgb_rar_set(hw, mca, rar_used_count);
+ pr_debug("Added a multicast address to RAR[%d]\n", i);
rar_used_count++;
} else {
- hash_value = ixgb_hash_mc_addr(hw,
- mc_addr_list +
- (i *
- (IXGB_ETH_LENGTH_OF_ADDRESS
- + pad)));
+ hash_value = ixgb_hash_mc_addr(hw, mca);
- DEBUGOUT1(" Hash value = 0x%03X\n", hash_value);
+ pr_debug("Hash value = 0x%03X\n", hash_value);
ixgb_mta_set(hw, hash_value);
}
+
+ mca += IXGB_ETH_LENGTH_OF_ADDRESS + pad;
}
- DEBUGOUT("MC Update Complete\n");
+ pr_debug("MC Update Complete\n");
return;
}
@@ -520,7 +501,7 @@ ixgb_hash_mc_addr(struct ixgb_hw *hw,
{
u32 hash_value = 0;
- DEBUGFUNC("ixgb_hash_mc_addr");
+ ENTER();
/* The portion of the address that is used for the hash table is
* determined by the mc_filter_type setting.
@@ -547,7 +528,7 @@ ixgb_hash_mc_addr(struct ixgb_hw *hw,
break;
default:
/* Invalid mc_filter_type, what should we do? */
- DEBUGOUT("MC filter type param set incorrectly\n");
+ pr_debug("MC filter type param set incorrectly\n");
ASSERT(0);
break;
}
@@ -603,7 +584,7 @@ ixgb_rar_set(struct ixgb_hw *hw,
{
u32 rar_low, rar_high;
- DEBUGFUNC("ixgb_rar_set");
+ ENTER();
/* HW expects these in little endian so we reverse the byte order
* from network order (big endian) to little endian
@@ -666,7 +647,7 @@ ixgb_setup_fc(struct ixgb_hw *hw)
u32 pap_reg = 0; /* by default, assume no pause time */
bool status = true;
- DEBUGFUNC("ixgb_setup_fc");
+ ENTER();
/* Get the current control reg 0 settings */
ctrl_reg = IXGB_READ_REG(hw, CTRL0);
@@ -710,7 +691,7 @@ ixgb_setup_fc(struct ixgb_hw *hw)
break;
default:
/* We should never get here. The value should be 0-3. */
- DEBUGOUT("Flow control param set incorrectly\n");
+ pr_debug("Flow control param set incorrectly\n");
ASSERT(0);
break;
}
@@ -940,7 +921,7 @@ ixgb_check_for_link(struct ixgb_hw *hw)
u32 status_reg;
u32 xpcss_reg;
- DEBUGFUNC("ixgb_check_for_link");
+ ENTER();
xpcss_reg = IXGB_READ_REG(hw, XPCSS);
status_reg = IXGB_READ_REG(hw, STATUS);
@@ -950,7 +931,7 @@ ixgb_check_for_link(struct ixgb_hw *hw)
hw->link_up = true;
} else if (!(xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) &&
(status_reg & IXGB_STATUS_LU)) {
- DEBUGOUT("XPCSS Not Aligned while Status:LU is set.\n");
+ pr_debug("XPCSS Not Aligned while Status:LU is set\n");
hw->link_up = ixgb_link_reset(hw);
} else {
/*
@@ -981,8 +962,7 @@ bool ixgb_check_for_bad_link(struct ixgb_hw *hw)
newRFC = IXGB_READ_REG(hw, RFC);
if ((hw->lastLFC + 250 < newLFC)
|| (hw->lastRFC + 250 < newRFC)) {
- DEBUGOUT
- ("BAD LINK! too many LFC/RFC since last check\n");
+ pr_debug("BAD LINK! too many LFC/RFC since last check\n");
bad_link_returncode = true;
}
hw->lastLFC = newLFC;
@@ -1002,11 +982,11 @@ ixgb_clear_hw_cntrs(struct ixgb_hw *hw)
{
volatile u32 temp_reg;
- DEBUGFUNC("ixgb_clear_hw_cntrs");
+ ENTER();
/* if we are stopped or resetting exit gracefully */
if (hw->adapter_stopped) {
- DEBUGOUT("Exiting because the adapter is stopped!!!\n");
+ pr_debug("Exiting because the adapter is stopped!!!\n");
return;
}
@@ -1156,26 +1136,21 @@ static bool
mac_addr_valid(u8 *mac_addr)
{
bool is_valid = true;
- DEBUGFUNC("mac_addr_valid");
+ ENTER();
/* Make sure it is not a multicast address */
- if (IS_MULTICAST(mac_addr)) {
- DEBUGOUT("MAC address is multicast\n");
+ if (is_multicast_ether_addr(mac_addr)) {
+ pr_debug("MAC address is multicast\n");
is_valid = false;
}
/* Not a broadcast address */
- else if (IS_BROADCAST(mac_addr)) {
- DEBUGOUT("MAC address is broadcast\n");
+ else if (is_broadcast_ether_addr(mac_addr)) {
+ pr_debug("MAC address is broadcast\n");
is_valid = false;
}
/* Reject the zero address */
- else if (mac_addr[0] == 0 &&
- mac_addr[1] == 0 &&
- mac_addr[2] == 0 &&
- mac_addr[3] == 0 &&
- mac_addr[4] == 0 &&
- mac_addr[5] == 0) {
- DEBUGOUT("MAC address is all zeros\n");
+ else if (is_zero_ether_addr(mac_addr)) {
+ pr_debug("MAC address is all zeros\n");
is_valid = false;
}
return (is_valid);
diff --git a/drivers/net/ixgb/ixgb_hw.h b/drivers/net/ixgb/ixgb_hw.h
index af6ca3a..873d32b 100644
--- a/drivers/net/ixgb/ixgb_hw.h
+++ b/drivers/net/ixgb/ixgb_hw.h
@@ -636,18 +636,6 @@ struct ixgb_flash_buffer {
u8 filler3[0xAAAA];
};
-/*
- * This is a little-endian specific check.
- */
-#define IS_MULTICAST(Address) \
- (bool)(((u8 *)(Address))[0] & ((u8)0x01))
-
-/*
- * Check whether an address is broadcast.
- */
-#define IS_BROADCAST(Address) \
- ((((u8 *)(Address))[0] == ((u8)0xff)) && (((u8 *)(Address))[1] == ((u8)0xff)))
-
/* Flow control parameters */
struct ixgb_fc {
u32 high_water; /* Flow Control High-water */
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 93d0185..cfcc0b2 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -26,6 +26,8 @@
*******************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "ixgb.h"
char ixgb_driver_name[] = "ixgb";
@@ -146,10 +148,8 @@ MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
static int __init
ixgb_init_module(void)
{
- printk(KERN_INFO "%s - version %s\n",
- ixgb_driver_string, ixgb_driver_version);
-
- printk(KERN_INFO "%s\n", ixgb_copyright);
+ pr_info("%s - version %s\n", ixgb_driver_string, ixgb_driver_version);
+ pr_info("%s\n", ixgb_copyright);
return pci_register_driver(&ixgb_driver);
}
@@ -374,8 +374,7 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
} else {
if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) ||
(err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))) {
- printk(KERN_ERR
- "ixgb: No usable DMA configuration, aborting\n");
+ pr_err("No usable DMA configuration, aborting\n");
goto err_dma_mask;
}
pci_using_dac = 0;
@@ -1119,15 +1118,14 @@ ixgb_watchdog(unsigned long data)
if (adapter->hw.link_up) {
if (!netif_carrier_ok(netdev)) {
- printk(KERN_INFO "ixgb: %s NIC Link is Up 10 Gbps "
- "Full Duplex, Flow Control: %s\n",
- netdev->name,
- (adapter->hw.fc.type == ixgb_fc_full) ?
- "RX/TX" :
- ((adapter->hw.fc.type == ixgb_fc_rx_pause) ?
- "RX" :
- ((adapter->hw.fc.type == ixgb_fc_tx_pause) ?
- "TX" : "None")));
+ netdev_info(netdev,
+ "NIC Link is Up 10 Gbps Full Duplex, Flow Control: %s\n",
+ (adapter->hw.fc.type == ixgb_fc_full) ?
+ "RX/TX" :
+ (adapter->hw.fc.type == ixgb_fc_rx_pause) ?
+ "RX" :
+ (adapter->hw.fc.type == ixgb_fc_tx_pause) ?
+ "TX" : "None");
adapter->link_speed = 10000;
adapter->link_duplex = FULL_DUPLEX;
netif_carrier_on(netdev);
@@ -1136,8 +1134,7 @@ ixgb_watchdog(unsigned long data)
if (netif_carrier_ok(netdev)) {
adapter->link_speed = 0;
adapter->link_duplex = 0;
- printk(KERN_INFO "ixgb: %s NIC Link is Down\n",
- netdev->name);
+ netdev_info(netdev, "NIC Link is Down\n");
netif_carrier_off(netdev);
}
}
@@ -2323,7 +2320,7 @@ static void ixgb_io_resume(struct pci_dev *pdev)
if (netif_running(netdev)) {
if (ixgb_up(adapter)) {
- printk ("ixgb: can't bring device back up after reset\n");
+ pr_err("can't bring device back up after reset\n");
return;
}
}
diff --git a/drivers/net/ixgb/ixgb_osdep.h b/drivers/net/ixgb/ixgb_osdep.h
index 371a6be..e361185 100644
--- a/drivers/net/ixgb/ixgb_osdep.h
+++ b/drivers/net/ixgb/ixgb_osdep.h
@@ -41,20 +41,8 @@
#undef ASSERT
#define ASSERT(x) BUG_ON(!(x))
-#define MSGOUT(S, A, B) printk(KERN_DEBUG S "\n", A, B)
-
-#ifdef DBG
-#define DEBUGOUT(S) printk(KERN_DEBUG S "\n")
-#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S "\n", A)
-#else
-#define DEBUGOUT(S)
-#define DEBUGOUT1(S, A...)
-#endif
-
-#define DEBUGFUNC(F) DEBUGOUT(F)
-#define DEBUGOUT2 DEBUGOUT1
-#define DEBUGOUT3 DEBUGOUT2
-#define DEBUGOUT7 DEBUGOUT3
+
+#define ENTER() pr_debug("%s\n", __func__);
#define IXGB_WRITE_REG(a, reg, value) ( \
writel((value), ((a)->hw_addr + IXGB_##reg)))
diff --git a/drivers/net/ixgb/ixgb_param.c b/drivers/net/ixgb/ixgb_param.c
index af35e1d..88a08f0 100644
--- a/drivers/net/ixgb/ixgb_param.c
+++ b/drivers/net/ixgb/ixgb_param.c
@@ -26,6 +26,8 @@
*******************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "ixgb.h"
/* This is the only thing that needs to be changed to adjust the
@@ -209,16 +211,16 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
case enable_option:
switch (*value) {
case OPTION_ENABLED:
- printk(KERN_INFO "%s Enabled\n", opt->name);
+ pr_info("%s Enabled\n", opt->name);
return 0;
case OPTION_DISABLED:
- printk(KERN_INFO "%s Disabled\n", opt->name);
+ pr_info("%s Disabled\n", opt->name);
return 0;
}
break;
case range_option:
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- printk(KERN_INFO "%s set to %i\n", opt->name, *value);
+ pr_info("%s set to %i\n", opt->name, *value);
return 0;
}
break;
@@ -230,7 +232,7 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
ent = &opt->arg.l.p[i];
if (*value == ent->i) {
if (ent->str[0] != '\0')
- printk(KERN_INFO "%s\n", ent->str);
+ pr_info("%s\n", ent->str);
return 0;
}
}
@@ -240,8 +242,7 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
BUG();
}
- printk(KERN_INFO "Invalid %s specified (%i) %s\n",
- opt->name, *value, opt->err);
+ pr_info("Invalid %s specified (%i) %s\n", opt->name, *value, opt->err);
*value = opt->def;
return -1;
}
@@ -261,9 +262,8 @@ ixgb_check_options(struct ixgb_adapter *adapter)
{
int bd = adapter->bd_number;
if (bd >= IXGB_MAX_NIC) {
- printk(KERN_NOTICE
- "Warning: no configuration for board #%i\n", bd);
- printk(KERN_NOTICE "Using defaults for all values\n");
+ pr_notice("Warning: no configuration for board #%i\n", bd);
+ pr_notice("Using defaults for all values\n");
}
{ /* Transmit Descriptor Count */
@@ -363,8 +363,7 @@ ixgb_check_options(struct ixgb_adapter *adapter)
adapter->hw.fc.high_water = opt.def;
}
if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
- printk(KERN_INFO
- "Ignoring RxFCHighThresh when no RxFC\n");
+ pr_info("Ignoring RxFCHighThresh when no RxFC\n");
}
{ /* Receive Flow Control Low Threshold */
const struct ixgb_option opt = {
@@ -383,8 +382,7 @@ ixgb_check_options(struct ixgb_adapter *adapter)
adapter->hw.fc.low_water = opt.def;
}
if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
- printk(KERN_INFO
- "Ignoring RxFCLowThresh when no RxFC\n");
+ pr_info("Ignoring RxFCLowThresh when no RxFC\n");
}
{ /* Flow Control Pause Time Request*/
const struct ixgb_option opt = {
@@ -404,17 +402,14 @@ ixgb_check_options(struct ixgb_adapter *adapter)
adapter->hw.fc.pause_time = opt.def;
}
if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
- printk(KERN_INFO
- "Ignoring FCReqTimeout when no RxFC\n");
+ pr_info("Ignoring FCReqTimeout when no RxFC\n");
}
/* high low and spacing check for rx flow control thresholds */
if (adapter->hw.fc.type & ixgb_fc_tx_pause) {
/* high must be greater than low */
if (adapter->hw.fc.high_water < (adapter->hw.fc.low_water + 8)) {
/* set defaults */
- printk(KERN_INFO
- "RxFCHighThresh must be >= (RxFCLowThresh + 8), "
- "Using Defaults\n");
+ pr_info("RxFCHighThresh must be >= (RxFCLowThresh + 8), Using Defaults\n");
adapter->hw.fc.high_water = DEFAULT_FCRTH;
adapter->hw.fc.low_water = DEFAULT_FCRTL;
}
--
1.7.0.14.g7e948
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists