[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4B87B5A4.2010106@ge.com>
Date: Fri, 26 Feb 2010 11:51:00 +0000
From: Martyn Welch <martyn.welch@...com>
To: avorontsov@...mvista.com
CC: linuxppc-dev list <linuxppc-dev@...abs.org>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Sandeep Gopalpet <Sandeep.Kumar@...escale.com>,
davem@...emloft.net, Kumar Gala <galak@...nel.crashing.org>
Subject: Re: Gianfar driver failing on MPC8641D based board
Anton Vorontsov wrote:
> On Thu, Feb 25, 2010 at 04:46:54PM +0000, Martyn Welch wrote:
> [...]
>
>>> nfs: server 192.168.0.1 not responding, still trying
>>>
>>>
>> Further testing has shown that this isn't restricted to warm reboots, it
>> happens from cold as well. In addition, the exact timing of the failure
>> seems to vary, some boots have got further before failing.
>>
>
> Unfortunately I don't have any 8641 boards near me, so I can't
> debug this myself. Though, I tested gianfar on MPC8568E-MDS with
> 2.6.33 kernel, and it seems to work just fine.
>
> I see you use SMP. Can you try to turn it off? If that will fix
> the issue, then it'll be a good data point.
>
> Meanwhile, I'll try SMP kernel on MPC8568 (UP), and let you
> know the results.
>
> Thanks
I removed the second core from the dts file rather than truly disabling
SMP in the kernel config. Doing this allowed the board to boot reliably.
Martyn
--
Martyn Welch (Principal Software Engineer) | Registered in England and
GE Intelligent Platforms | Wales (3828642) at 100
T +44(0)127322748 | Barbirolli Square, Manchester,
E martyn.welch@...com | M2 3AB VAT:GB 927559189
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists