| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100226115603.20259.93232.stgit@localhost.localdomain> Date: Fri, 26 Feb 2010 03:56:03 -0800 From: Jeff Kirsher <jeffrey.t.kirsher@...el.com> To: jeff@...zik.org Cc: netdev@...r.kernel.org, gospo@...hat.com, Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com>, Jeff Kirsher <jeffrey.t.kirsher@...el.com> Subject: [ethtool PATCH 2/2] ethtool: Update manpage with n-tuple information From: Peter Waskiewicz <peter.p.waskiewicz.jr@...el.com> Add n-tuple information to the ethtool manpage. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@...el.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com> --- ethtool.8 | 102 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 102 insertions(+), 0 deletions(-) diff --git a/ethtool.8 b/ethtool.8 index b45d171..eb6430b 100644 --- a/ethtool.8 +++ b/ethtool.8 @@ -214,6 +214,40 @@ ethtool \- Display or change ethernet card settings .I ethX .RI FILE .RI [ N ] + +.B ethtool \-u|\-\-show\-ntuple +.I ethX + +.B ethtool \-U|\-\-config\-ntuple +.I ethX +.RB [ flow-type +.RB tcp4|udp4|sctp4 ] +.RB [ src-ip +.IR addr ] +.RB [ src-ip-mask +.IR mask ] +.RB [ dst-ip +.IR addr ] +.RB [ dst-ip-mask +.IR mask ] +.RB [ src-port +.IR port ] +.RB [ src-port-mask +.IR mask ] +.RB [ dst-port +.IR port ] +.RB [ dst-port-mask +.IR mask ] +.RB [ vlan +.IR VLAN-tag ] +.RB [ vlan-mask +.IR mask ] +.RB [ user-def +.IR data ] +.RB [ user-def-mask +.IR mask ] +.RB [ action +.IR queue\ or\ drop ] .SH DESCRIPTION .BI ethtool is used for querying settings of an ethernet device and changing them. @@ -517,6 +551,74 @@ A number to identify flash region where the image should be flashed. Default region is 0 which denotes all regions in the flash. .PD .RE +.TP +.B \-u \-\-show-ntuple +Get Rx ntuple filters and actions, then display them to the user. +.PD +.RE +.TP +.B \-U \-\-config-ntuple +Configure Rx ntuple filters and actions +.TP +.B flow-type tcp4|udp4|sctp4 +.RS +.PD 0 +.TP 3 +.BR "tcp4" " TCP over IPv4" +.TP 3 +.BR "udp4" " UDP over IPv4" +.TP 3 +.BR "sctp4" " SCTP over IPv4" +.PD +.RE +.TP +.BI src-ip \ addr +Includes the source IP address, specified in hex. +.TP +.BI src-ip-mask \ mask +Specify a mask for the source IP address, specified in hex. +.TP +.BI dst-ip \ addr +Includes the destination IP address, specified in hex. +.TP +.BI dst-ip-mask \ mask +Specify a mask for the destination IP address, specified in hex. +.TP +.BI src-port \ port +Includes the source port, specified in decimal. +.TP +.BI src-port-mask \ mask +Specify a mask for the source port, specified in hex. +.TP +.BI dst-port \ port +Includes the destination port, specified in decimal. +.TP +.BI dst-port-mask \ mask +Specify a mask for the destination port, specified in hex. +.TP +.BI vlan \ VLAN-tag +Includes the VLAN tag, specified in hex. +.TP +.BI vlan-mask \ mask +Specify a mask for the VLAN tag, specified in hex. +.TP +.BI user-def \ data +Includes 64-bits of user-specific data, specified in hex. +.TP +.BI user-def-mask \ mask +Specify a mask for the user-specific data, specified in hex. +.TP +.BI action \ N +Specifies either the Rx queue to send packets to, or to drop +the matched flow. +.RS +.PD 0 +.TP 3 +.BR "-1" " Drop the matched flow" +.TP 3 +.BR "0 or higher" " Rx queue to route the flow" +.PD +.RE .SH BUGS Not supported (in part or whole) on all ethernet drivers. .SH AUTHOR -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists