| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1268242457.1545.347.camel@Joe-Laptop.home>
Date: Wed, 10 Mar 2010 09:34:17 -0800
From: Joe Perches <joe@...ches.com>
To: David Miller <davem@...emloft.net>
Cc: mikpe@...uu.se, netdev@...r.kernel.org, grundler@...isc-linux.org,
kyle@...artin.ca, linux-kernel@...r.kernel.org
Subject: [PATCH] drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip
init messages
On Wed, 2010-03-10 at 08:41 -0800, David Miller wrote:
> From: Mikael Pettersson <mikpe@...uu.se>
> Date: Wed, 10 Mar 2010 16:33:28 +0100
> > Booting 2.6.34-rc1 on a machine with a tulip nic I see
> > a number of kernel messages that include "(null)" where
> > previous kernels included the string "tulip0":
> CC:'ing the guilty party :-) It's one of the following
> commits:
Thanks Mikael.
Anonymity has some good attributes.
Blame avoidance is one of them.
I've broad shoulders. It's me, then Dwight Howard...
There might be another few of these where ->name or ->dev
was used before struct device or net_device was registered.
I'll go back and check.
tulip_core has:
if (tp->flags & HAS_MEDIA_TABLE) {
sprintf(dev->name, DRV_NAME "%d", board_idx); /* hack */
tulip_parse_eeprom(dev);
strcpy(dev->name, "eth%d"); /* un-hack */
}
So I don't feel _too_ bad.
tulip_parse_eeprom is done before register_netdev so the logging
there can not use netdev_<level> or dev_<level>(&dev->dev
Signed-off-by: Joe Perches <joe@...ches.com>
drivers/net/tulip/eeprom.c | 54 ++++++++++++++++++++++++-------------------
1 files changed, 30 insertions(+), 24 deletions(-)
---
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 93f4e83..49f05d1 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -143,6 +143,12 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
void __devinit tulip_parse_eeprom(struct net_device *dev)
{
+ /*
+ dev is not registered at this point, so logging messages can't
+ use dev_<level> or netdev_<level> but dev->name is good via a
+ hack in the caller
+ */
+
/* The last media info list parsed, for multiport boards. */
static struct mediatable *last_mediatable;
static unsigned char *last_ee_data;
@@ -161,15 +167,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
if (ee_data[0] == 0xff) {
if (last_mediatable) {
controller_index++;
- dev_info(&dev->dev,
- "Controller %d of multiport board\n",
- controller_index);
+ pr_info("%s: Controller %d of multiport board\n",
+ dev->name, controller_index);
tp->mtable = last_mediatable;
ee_data = last_ee_data;
goto subsequent_board;
} else
- dev_info(&dev->dev,
- "Missing EEPROM, this interface may not work correctly!\n");
+ pr_info("%s: Missing EEPROM, this interface may not work correctly!\n",
+ dev->name);
return;
}
/* Do a fix-up based on the vendor half of the station address prefix. */
@@ -181,15 +186,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
i++; /* An Accton EN1207, not an outlaw Maxtech. */
memcpy(ee_data + 26, eeprom_fixups[i].newtable,
sizeof(eeprom_fixups[i].newtable));
- dev_info(&dev->dev,
- "Old format EEPROM on '%s' board. Using substitute media control info\n",
- eeprom_fixups[i].name);
+ pr_info("%s: Old format EEPROM on '%s' board. Using substitute media control info\n",
+ dev->name, eeprom_fixups[i].name);
break;
}
}
if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
- dev_info(&dev->dev,
- "Old style EEPROM with no media selection information\n");
+ pr_info("%s: Old style EEPROM with no media selection information\n",
+ dev->name);
return;
}
}
@@ -217,8 +221,8 @@ subsequent_board:
/* there is no phy information, don't even try to build mtable */
if (count == 0) {
if (tulip_debug > 0)
- dev_warn(&dev->dev,
- "no phy info, aborting mtable build\n");
+ pr_warning("%s: no phy info, aborting mtable build\n",
+ dev->name);
return;
}
@@ -234,8 +238,10 @@ subsequent_board:
mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
mtable->csr15dir = mtable->csr15val = 0;
- dev_info(&dev->dev, "EEPROM default media type %s\n",
- media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
+ pr_info("%s: EEPROM default media type %s\n",
+ dev->name,
+ media & 0x0800 ? "Autosense"
+ : medianame[media & MEDIA_MASK]);
for (i = 0; i < count; i++) {
struct medialeaf *leaf = &mtable->mleaf[i];
@@ -298,17 +304,17 @@ subsequent_board:
}
if (tulip_debug > 1 && leaf->media == 11) {
unsigned char *bp = leaf->leafdata;
- dev_info(&dev->dev,
- "MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
- bp[0], bp[1], bp[2 + bp[1]*2],
- bp[5 + bp[2 + bp[1]*2]*2],
- bp[4 + bp[2 + bp[1]*2]*2]);
+ pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
+ dev->name,
+ bp[0], bp[1], bp[2 + bp[1]*2],
+ bp[5 + bp[2 + bp[1]*2]*2],
+ bp[4 + bp[2 + bp[1]*2]*2]);
}
- dev_info(&dev->dev,
- "Index #%d - Media %s (#%d) described by a %s (%d) block\n",
- i, medianame[leaf->media & 15], leaf->media,
- leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
- leaf->type);
+ pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n",
+ dev->name,
+ i, medianame[leaf->media & 15], leaf->media,
+ leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
+ leaf->type);
}
if (new_advertise)
tp->sym_advertise = new_advertise;
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists