| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100319182209.GD13672@ovro.caltech.edu>
Date: Fri, 19 Mar 2010 11:22:09 -0700
From: "Ira W. Snyder" <iws@...o.caltech.edu>
To: Samuel Ortiz <sameo@...ux.intel.com>
Cc: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
socketcan-core@...ts.berlios.de
Subject: Re: [PATCH 1/3] mfd: add support for Janz CMOD-IO PCI MODULbus
Carrier Board
On Fri, Mar 19, 2010 at 05:38:51PM +0100, Samuel Ortiz wrote:
> Hi Ira,
>
> Some comments below:
>
> On Thu, Mar 18, 2010 at 09:38:42AM -0700, Ira W. Snyder wrote:
> > +/* Module Parameters */
> > +static unsigned int num_modules = CMODIO_MAX_MODULES;
> > +static unsigned char *modules[CMODIO_MAX_MODULES] = {
> > + "janz-ican3",
> > + "janz-ican3",
> > + "",
> > + "janz-ttl",
> > +};
> That's not very nice, but I honestly dont know how to make it less ugly...
> At least this should be all left blank by default, as Wolfgang hinted.
>
Agreed, I've made the change in my tree.
> > +/*
> > + * Subdevice Support
> > + */
> Please use the mfd-core API for building and registering platform sub devices.
> The pieces of code below should shrink significantly.
>
Using this framework, how is it possible to create the devices that I
do down below. For each subdevice, I need three resources:
1) MODULbus registers -- PCI BAR3 + (0x200 * module_num)
2) PLX Control Registers -- PCI BAR4
3) IRQ
Specifically, the way IORESOURCE_MEM resources are copied seems wrong.
They start at the base address of only one resource and use the offsets
provided in the struct mfd_cell. See the if-statement at
drivers/mfd/mfd-core.c line 48.
I need two use two different parent resources. The mfd_add_devices()
function doesn't support this.
> > +static int cmodio_remove_subdev(struct device *dev, void *data)
> > +{
> > + platform_device_unregister(to_platform_device(dev));
> > + return 0;
> > +}
> > +
> > +static void cmodio_subdev_release(struct device *dev)
> > +{
> > + kfree(to_platform_device(dev));
> > +}
> > +
> > +static struct platform_device *cmodio_create_subdev(struct cmodio_device *priv,
> > + char *name,
> > + unsigned int res_count,
> > + unsigned int pdata_size)
> > +{
> > + struct platform_device *pdev;
> > + size_t res_size;
> > +
> > + res_size = sizeof(struct resource) * res_count;
> > + pdev = kzalloc(sizeof(*pdev) + res_size + pdata_size, GFP_KERNEL);
> > + if (!pdev)
> > + return NULL;
> > +
> > + pdev->dev.release = cmodio_subdev_release;
> > + pdev->dev.parent = &priv->pdev->dev;
> > + pdev->name = name;
> > +
> > + if (res_count) {
> > + pdev->resource = (struct resource *)(pdev + 1);
> > + pdev->num_resources = res_count;
> > + }
> > +
> > + if (pdata_size)
> > + pdev->dev.platform_data = (void *)(pdev + 1) + res_size;
> > +
> > + return pdev;
> > +}
> > +
> > +/* Create a memory resource for a subdevice */
> > +static void cmodio_create_mem(struct resource *parent, struct resource *res,
> > + resource_size_t offset, resource_size_t size)
> > +{
> > + res->flags = IORESOURCE_MEM;
> > + res->parent = parent;
> > + res->start = parent->start + offset;
> > + res->end = parent->start + offset + size - 1;
> > +}
> > +
> > +/* Create an IRQ resource for a subdevice */
> > +static void cmodio_create_irq(struct resource *res, unsigned int irq)
> > +{
> > + res->flags = IORESOURCE_IRQ;
> > + res->parent = NULL;
> > + res->start = irq;
> > + res->end = irq;
> > +}
> > +
> > +static int __devinit cmodio_probe_subdevice(struct cmodio_device *priv,
> > + char *name, unsigned int modno)
> > +{
> > + struct janz_platform_data *pdata;
> > + struct platform_device *pdev;
> > + resource_size_t offset, size;
> > + struct pci_dev *pci;
> > + int ret;
> > +
> > + pci = priv->pdev;
> > + pdev = cmodio_create_subdev(priv, name, 3, sizeof(*pdata));
> > + if (!pdev) {
> > + dev_err(&pci->dev, "MODULbus slot %d alloc failed\n", modno);
> > + ret = -ENOMEM;
> > + goto out_return;
> > + }
> > +
> > + pdata = pdev->dev.platform_data;
> > + pdata->modno = modno;
> > + pdev->id = priv->subdev_id++;
> > +
> > + /* MODULbus registers -- PCI BAR3 is big-endian MODULbus access */
> > + offset = CMODIO_MODULBUS_SIZE * modno;
> > + size = CMODIO_MODULBUS_SIZE;
> > + cmodio_create_mem(&pci->resource[3], &pdev->resource[0], offset, size);
> > +
> > + /* PLX Control Registers -- PCI BAR4 is interrupt and other registers */
> > + offset = 0;
> > + size = resource_size(&pci->resource[4]);
> > + cmodio_create_mem(&pci->resource[4], &pdev->resource[1], offset, size);
> > +
> > + /* IRQ */
> > + cmodio_create_irq(&pdev->resource[2], pci->irq);
> > +
> > + /* Register the device */
> > + ret = platform_device_register(pdev);
> > + if (ret) {
> > + dev_err(&pci->dev, "MODULbus slot %d register failed\n", modno);
> > + goto out_free;
> > + }
> > +
> > + return 0;
> > +
> > +out_free:
> > + cmodio_subdev_release(&pdev->dev);
> > +out_return:
> > + return ret;
> > +}
> > +
> > +/* Probe each submodule using kernel parameters */
> > +static int __devinit cmodio_probe_submodules(struct cmodio_device *priv)
> > +{
> > + char *name;
> > + int i;
> > +
> > + for (i = 0; i < num_modules; i++) {
> > + name = modules[i];
> > + if (!strcmp(name, ""))
> > + continue;
> > +
> > + dev_dbg(&priv->pdev->dev, "MODULbus %d: name %s\n", i, name);
> > + cmodio_probe_subdevice(priv, name, i);
> > + }
> > +
> > + return 0;
> > +}
>
>
> > +/*
> > + * PCI Driver
> > + */
> > +
> > +static int __devinit cmodio_pci_probe(struct pci_dev *dev,
> > + const struct pci_device_id *id)
> > +{
> > + struct cmodio_device *priv;
> > + int ret;
> > +
> > + priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> > + if (!priv) {
> > + dev_err(&dev->dev, "unable to allocate private data\n");
> > + ret = -ENOMEM;
> > + goto out_return;
> > + }
> > +
> > + pci_set_drvdata(dev, priv);
> > + priv->pdev = dev;
> > +
> > + /* Hardware Initialization */
> > + ret = pci_enable_device(dev);
> > + if (ret) {
> > + dev_err(&dev->dev, "unable to enable device\n");
> > + goto out_free_priv;
> > + }
> > +
> > + pci_set_master(dev);
> > + ret = pci_request_regions(dev, DRV_NAME);
> > + if (ret) {
> > + dev_err(&dev->dev, "unable to request regions\n");
> > + goto out_pci_disable_device;
> > + }
> > +
> > + /* Onboard configuration registers */
> > + priv->ctrl = pci_ioremap_bar(dev, 4);
> Why 4 ?
>
>
Because that is how the device works ;) There is a comment up above that
describes them as the "PLX control registers". Are you suggesting that I
add a comment here too?
I think lots of other PCI devices just use hard-coded numbers here.
They're device specific. You won't be able to program for the device at
all if you don't know the meaning of each PCI BAR.
> > +#define PCI_VENDOR_ID_JANZ 0x13c3
> That probably belongs to pci_ids.h
>
Should I add a patch to the series for this?
Thanks,
Ira
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists