| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100324004116.31609.73183.stgit@localhost.localdomain>
Date: Tue, 23 Mar 2010 17:41:45 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, gospo@...hat.com,
Vasu Dev <vasu.dev@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [PATCH v2 1/2] vlan: adds vlan_dev_select_queue
From: Vasu Dev <vasu.dev@...el.com>
This is required to correctly select vlan tx queue for a driver
supporting multi tx queue with ndo_select_queue implemented since
currently selected vlan tx queue is unaligned to selected queue by
real net_devce ndo_select_queue.
Unaligned vlan tx queue selection causes thrash with higher vlan
tx lock contention for least fcoe traffic and wrong socket tx
queue_mapping for ixgbe having ndo_select_queue implemented.
-v2
As per Eric Dumazet<eric.dumazet@...il.com> comments, mirrored
vlan net_device_ops to have them with and without vlan_dev_select_queue
and then select according to real dev ndo_select_queue present or not
for a vlan net_device. This is to completely skip vlan_dev_select_queue
calling for real net_device not supporting ndo_select_queue.
Signed-off-by: Vasu Dev <vasu.dev@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
net/8021q/vlan_dev.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 68 insertions(+), 3 deletions(-)
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 9e83272..2fd057c 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -361,6 +361,14 @@ static netdev_tx_t vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb,
return ret;
}
+static u16 vlan_dev_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+ struct net_device *rdev = vlan_dev_info(dev)->real_dev;
+ const struct net_device_ops *ops = rdev->netdev_ops;
+
+ return ops->ndo_select_queue(rdev, skb);
+}
+
static int vlan_dev_change_mtu(struct net_device *dev, int new_mtu)
{
/* TODO: gotta make sure the underlying layer can handle it,
@@ -688,7 +696,8 @@ static const struct header_ops vlan_header_ops = {
.parse = eth_header_parse,
};
-static const struct net_device_ops vlan_netdev_ops, vlan_netdev_accel_ops;
+static const struct net_device_ops vlan_netdev_ops, vlan_netdev_accel_ops,
+ vlan_netdev_ops_sq, vlan_netdev_accel_ops_sq;
static int vlan_dev_init(struct net_device *dev)
{
@@ -722,11 +731,17 @@ static int vlan_dev_init(struct net_device *dev)
if (real_dev->features & NETIF_F_HW_VLAN_TX) {
dev->header_ops = real_dev->header_ops;
dev->hard_header_len = real_dev->hard_header_len;
- dev->netdev_ops = &vlan_netdev_accel_ops;
+ if (real_dev->netdev_ops->ndo_select_queue)
+ dev->netdev_ops = &vlan_netdev_accel_ops_sq;
+ else
+ dev->netdev_ops = &vlan_netdev_accel_ops;
} else {
dev->header_ops = &vlan_header_ops;
dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
- dev->netdev_ops = &vlan_netdev_ops;
+ if (real_dev->netdev_ops->ndo_select_queue)
+ dev->netdev_ops = &vlan_netdev_ops_sq;
+ else
+ dev->netdev_ops = &vlan_netdev_ops;
}
if (is_vlan_dev(real_dev))
@@ -865,6 +880,56 @@ static const struct net_device_ops vlan_netdev_accel_ops = {
#endif
};
+static const struct net_device_ops vlan_netdev_ops_sq = {
+ .ndo_select_queue = vlan_dev_select_queue,
+ .ndo_change_mtu = vlan_dev_change_mtu,
+ .ndo_init = vlan_dev_init,
+ .ndo_uninit = vlan_dev_uninit,
+ .ndo_open = vlan_dev_open,
+ .ndo_stop = vlan_dev_stop,
+ .ndo_start_xmit = vlan_dev_hard_start_xmit,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = vlan_dev_set_mac_address,
+ .ndo_set_rx_mode = vlan_dev_set_rx_mode,
+ .ndo_set_multicast_list = vlan_dev_set_rx_mode,
+ .ndo_change_rx_flags = vlan_dev_change_rx_flags,
+ .ndo_do_ioctl = vlan_dev_ioctl,
+ .ndo_neigh_setup = vlan_dev_neigh_setup,
+ .ndo_get_stats = vlan_dev_get_stats,
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+ .ndo_fcoe_ddp_setup = vlan_dev_fcoe_ddp_setup,
+ .ndo_fcoe_ddp_done = vlan_dev_fcoe_ddp_done,
+ .ndo_fcoe_enable = vlan_dev_fcoe_enable,
+ .ndo_fcoe_disable = vlan_dev_fcoe_disable,
+ .ndo_fcoe_get_wwn = vlan_dev_fcoe_get_wwn,
+#endif
+};
+
+static const struct net_device_ops vlan_netdev_accel_ops_sq = {
+ .ndo_select_queue = vlan_dev_select_queue,
+ .ndo_change_mtu = vlan_dev_change_mtu,
+ .ndo_init = vlan_dev_init,
+ .ndo_uninit = vlan_dev_uninit,
+ .ndo_open = vlan_dev_open,
+ .ndo_stop = vlan_dev_stop,
+ .ndo_start_xmit = vlan_dev_hwaccel_hard_start_xmit,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = vlan_dev_set_mac_address,
+ .ndo_set_rx_mode = vlan_dev_set_rx_mode,
+ .ndo_set_multicast_list = vlan_dev_set_rx_mode,
+ .ndo_change_rx_flags = vlan_dev_change_rx_flags,
+ .ndo_do_ioctl = vlan_dev_ioctl,
+ .ndo_neigh_setup = vlan_dev_neigh_setup,
+ .ndo_get_stats = vlan_dev_get_stats,
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+ .ndo_fcoe_ddp_setup = vlan_dev_fcoe_ddp_setup,
+ .ndo_fcoe_ddp_done = vlan_dev_fcoe_ddp_done,
+ .ndo_fcoe_enable = vlan_dev_fcoe_enable,
+ .ndo_fcoe_disable = vlan_dev_fcoe_disable,
+ .ndo_fcoe_get_wwn = vlan_dev_fcoe_get_wwn,
+#endif
+};
+
void vlan_setup(struct net_device *dev)
{
ether_setup(dev);
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists