| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1269889076-5611-1-git-send-email-maz@misterjones.org>
Date: Mon, 29 Mar 2010 19:57:56 +0100
From: Marc Zyngier <maz@...terjones.org>
To: netdev@...r.kernel.org, socketcan-core@...ts.berlios.de,
linux-arm-kernel@...ts.infradead.org
Cc: Edwin Peer <epeer@...services.co.za>
Subject: [PATCH] Add hotplug support to mcp251x driver
Chip model can now be selected directly by matching the modalias name
(instead of filling the .model field in platform_data), and allows the
module to be auto-loaded. Previous behaviour is of course still supported.
Convert the two in-tree users to this feature (icontrol & zeus).
Tested on an Zeus platform (mcp2515).
Signed-off-by: Marc Zyngier <maz@...terjones.org>
Acked-by: Christian Pellegrin <chripell@...e.org>
Cc: Edwin Peer <epeer@...services.co.za>
---
arch/arm/mach-pxa/icontrol.c | 9 ++++-----
arch/arm/mach-pxa/zeus.c | 4 +---
drivers/net/can/mcp251x.c | 14 ++++++++++++++
include/linux/can/platform/mcp251x.h | 4 ++--
4 files changed, 21 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 771137f..5ccb0ce 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -73,7 +73,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
static struct mcp251x_platform_data mcp251x_info = {
.oscillator_frequency = 16E6,
- .model = CAN_MCP251X_MCP2515,
.board_specific_setup = NULL,
.power_enable = NULL,
.transceiver_enable = NULL
@@ -81,7 +80,7 @@ static struct mcp251x_platform_data mcp251x_info = {
static struct spi_board_info mcp251x_board_info[] = {
{
- .modalias = "mcp251x",
+ .modalias = "mcp2515",
.max_speed_hz = 6500000,
.bus_num = 3,
.chip_select = 0,
@@ -90,7 +89,7 @@ static struct spi_board_info mcp251x_board_info[] = {
.irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
},
{
- .modalias = "mcp251x",
+ .modalias = "mcp2515",
.max_speed_hz = 6500000,
.bus_num = 3,
.chip_select = 1,
@@ -99,7 +98,7 @@ static struct spi_board_info mcp251x_board_info[] = {
.irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
},
{
- .modalias = "mcp251x",
+ .modalias = "mcp2515",
.max_speed_hz = 6500000,
.bus_num = 4,
.chip_select = 0,
@@ -108,7 +107,7 @@ static struct spi_board_info mcp251x_board_info[] = {
.irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
},
{
- .modalias = "mcp251x",
+ .modalias = "mcp2515",
.max_speed_hz = 6500000,
.bus_num = 4,
.chip_select = 1,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 39896d8..dbd2569 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -414,15 +414,13 @@ static int zeus_mcp2515_transceiver_enable(int enable)
static struct mcp251x_platform_data zeus_mcp2515_pdata = {
.oscillator_frequency = 16*1000*1000,
- .model = CAN_MCP251X_MCP2515,
.board_specific_setup = zeus_mcp2515_setup,
- .transceiver_enable = zeus_mcp2515_transceiver_enable,
.power_enable = zeus_mcp2515_transceiver_enable,
};
static struct spi_board_info zeus_spi_board_info[] = {
[0] = {
- .modalias = "mcp251x",
+ .modalias = "mcp2515",
.platform_data = &zeus_mcp2515_pdata,
.irq = gpio_to_irq(ZEUS_CAN_GPIO),
.max_speed_hz = 1*1000*1000,
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index f8cc168..f521579 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -922,12 +922,16 @@ static int __devinit mcp251x_can_probe(struct spi_device *spi)
struct net_device *net;
struct mcp251x_priv *priv;
struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+ int model = spi_get_device_id(spi)->driver_data;
int ret = -ENODEV;
if (!pdata)
/* Platform data is required for osc freq */
goto error_out;
+ if (model)
+ pdata->model = model;
+
/* Allocate can/net device */
net = alloc_candev(sizeof(struct mcp251x_priv), TX_ECHO_SKB_MAX);
if (!net) {
@@ -1117,6 +1121,15 @@ static int mcp251x_can_resume(struct spi_device *spi)
#define mcp251x_can_resume NULL
#endif
+static struct spi_device_id mcp251x_id_table[] = {
+ { "mcp251x", 0 /* Use pdata.model */ },
+ { "mcp2510", CAN_MCP251X_MCP2510 },
+ { "mcp2515", CAN_MCP251X_MCP2515 },
+ { },
+};
+
+MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
+
static struct spi_driver mcp251x_can_driver = {
.driver = {
.name = DEVICE_NAME,
@@ -1124,6 +1137,7 @@ static struct spi_driver mcp251x_can_driver = {
.owner = THIS_MODULE,
},
+ .id_table = mcp251x_id_table,
.probe = mcp251x_can_probe,
.remove = __devexit_p(mcp251x_can_remove),
.suspend = mcp251x_can_suspend,
diff --git a/include/linux/can/platform/mcp251x.h b/include/linux/can/platform/mcp251x.h
index 1448177..dba2826 100644
--- a/include/linux/can/platform/mcp251x.h
+++ b/include/linux/can/platform/mcp251x.h
@@ -26,8 +26,8 @@
struct mcp251x_platform_data {
unsigned long oscillator_frequency;
int model;
-#define CAN_MCP251X_MCP2510 0
-#define CAN_MCP251X_MCP2515 1
+#define CAN_MCP251X_MCP2510 0x2510
+#define CAN_MCP251X_MCP2515 0x2515
int (*board_specific_setup)(struct spi_device *spi);
int (*transceiver_enable)(int enable);
int (*power_enable) (int enable);
--
1.7.0.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists