| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100405194356.GA10488@gospo.rdu.redhat.com>
Date: Mon, 5 Apr 2010 15:43:56 -0400
From: Andy Gospodarek <andy@...yhouse.net>
To: Amerigo Wang <amwang@...hat.com>
Cc: linux-kernel@...r.kernel.org, Matt Mackall <mpm@...enic.com>,
netdev@...r.kernel.org, bridge@...ts.linux-foundation.org,
Andy Gospodarek <gospo@...hat.com>,
Neil Horman <nhorman@...driver.com>,
Jeff Moyer <jmoyer@...hat.com>,
Stephen Hemminger <shemminger@...ux-foundation.org>,
bonding-devel@...ts.sourceforge.net,
Jay Vosburgh <fubar@...ibm.com>,
David Miller <davem@...emloft.net>
Subject: Re: [v2 Patch 3/3] bonding: make bonding support netpoll
On Mon, Apr 05, 2010 at 05:12:40AM -0400, Amerigo Wang wrote:
>
> Based on Andy's work, but I modified a lot.
>
> Similar to the patch for bridge, this patch does:
>
> 1) implement the 2 methods to support netpoll for bonding;
>
> 2) modify netpoll during forwarding packets via bonding;
>
> 3) disable netpoll support of bonding when a netpoll-unabled device
> is added to bonding;
>
> 4) enable netpoll support when all underlying devices support netpoll.
>
> Cc: Andy Gospodarek <gospo@...hat.com>
> Cc: Jeff Moyer <jmoyer@...hat.com>
> Cc: Matt Mackall <mpm@...enic.com>
> Cc: Neil Horman <nhorman@...driver.com>
> Cc: Jay Vosburgh <fubar@...ibm.com>
> Cc: David Miller <davem@...emloft.net>
> Signed-off-by: WANG Cong <amwang@...hat.com>
>
I tried these patches on top of Linus' latest tree and still get
deadlocks. Your line numbers might differ a bit, but you should be
seeing them too.
# echo 7 4 1 7 > /proc/sys/kernel/printk
# ifup bond0
bonding: bond0: setting mode to balance-rr (0).
bonding: bond0: Setting MII monitoring interval to 1000.
ADDRCONF(NETDEV_UP): bond0: link is not ready
bonding: bond0: Adding slave eth4.
bnx2 0000:10:00.0: eth4: using MSIX
bonding: bond0: enslaving eth4 as an active interface with a down link.
bonding: bond0: Adding slave eth5.
bnx2 0000:10:00.1: eth5: using MSIX
bonding: bond0: enslaving eth5 as an active interface with a down link.
bnx2 0000:10:00.0: eth4: NIC Copper Link is Up, 100 Mbps full duplex,
receive & transmit flow control ON
bonding: bond0: link status definitely up for interface eth4.
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
bnx2 0000:10:00.1: eth5: NIC Copper Link is Up, 100 Mbps full duplex,
receive & transmit flow control ON
bond0: IPv6 duplicate address fe80::210:18ff:fe36:ad4 detected!
bonding: bond0: link status definitely up for interface eth5.
# cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
Bonding Mode: load balancing (round-robin)
MII Status: up
MII Polling Interval (ms): 1000
Up Delay (ms): 0
Down Delay (ms): 0
Slave Interface: eth4
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:10:18:36:0a:d4
Slave Interface: eth5
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:10:18:36:0a:d6
# modprobe netconsole
netconsole: local port 1234
netconsole: local IP 10.0.100.2
netconsole: interface 'bond0'
netconsole: remote port 6666
netconsole: remote IP 10.0.100.1
netconsole: remote ethernet address 00:e0:81:71:ee:aa
console [netcon0] enabled
netconsole: network logging started
# echo -eth4 > /sys/class/net/bond0/bonding/slaves
bonding: bond0: Removing slave eth4
[ now the system is hung ]
My suspicion from dealing with this problem in the past is that there is
contention over bond->lock.
Since there statements that will result in netconsole messages inside
the write_lock_bh in bond_release:
1882 write_lock_bh(&bond->lock);
1883
1884 slave = bond_get_slave_by_dev(bond, slave_dev);
1885 if (!slave) {
1886 /* not a slave of this bond */
1887 pr_info("%s: %s not enslaved\n",
1888 bond_dev->name, slave_dev->name);
1889 write_unlock_bh(&bond->lock);
1890 return -EINVAL;
1891 }
1892
1893 if (!bond->params.fail_over_mac) {
1894 if (!compare_ether_addr(bond_dev->dev_addr, slave->perm_hwaddr) &&
1895 bond->slave_cnt > 1)
1896 pr_warning("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s.
we are getting stuck at 1986 since bond_xmit_roundrobin (in my case)
will try and acquire bond->lock for reading.
One valuable aspect netpoll_start_xmit routine was that is could be used
to check to be sure that bond->lock could be taken for writing. This
made us sure that we were not in a call stack that has already taken the
lock and queuing the skb to be sent later would prevent the imminent
deadlock.
A way to prevent this is needed and a first-pass might be to do
something similar to what I below above for all the xmit routines. I
confirmed the following patch prevents that deadlock:
# git diff drivers/net/bonding/
diff --git a/drivers/net/bonding/bond_main.c
b/drivers/net/bonding/bond_main.c
index 4a41886..53b39cc 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4232,7 +4232,8 @@ static int bond_xmit_roundrobin(struct sk_buff *skb, struc
int i, slave_no, res = 1;
struct iphdr *iph = ip_hdr(skb);
- read_lock(&bond->lock);
+ if (!read_trylock(&bond->lock))
+ return NETDEV_TX_BUSY;
if (!BOND_IS_OK(bond))
goto out;
The kernel no longer hangs, but a new warning message shows up (over
netconsole even!):
------------[ cut here ]------------
WARNING: at kernel/softirq.c:143 local_bh_enable+0x43/0xba()
Hardware name: HP xw4400 Workstation
Modules linked in: tg3 netconsole bonding ipt_REJECT bridge stp autofs4
i2c_dev i2c_core hidp rfcomm l2cap crc16 bluetooth rfkill sunrpc 8021q
iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter
ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq dm_multipath
video output sbs sbshc battery acpi_memhotplug ac lp sg ide_cd_mod
tpm_tis rtc_cmos rtc_core serio_raw cdrom libphy e1000e floppy
parport_pc parport button tpm tpm_bios bnx2 rtc_lib tulip pcspkr shpchp
dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod ata_piix ahci
libata sd_mod scsi_mod ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last
unloaded: tg3]
Pid: 9, comm: events/0 Not tainted 2.6.34-rc3 #6
Call Trace:
[<ffffffff81058754>] ? cpu_clock+0x2d/0x41
[<ffffffff810404d9>] ? local_bh_enable+0x43/0xba
[<ffffffff8103a350>] warn_slowpath_common+0x77/0x8f
[<ffffffff812a4659>] ? dev_queue_xmit+0x408/0x467
[<ffffffff8103a377>] warn_slowpath_null+0xf/0x11
[<ffffffff810404d9>] local_bh_enable+0x43/0xba
[<ffffffff812a4659>] dev_queue_xmit+0x408/0x467
[<ffffffff812a435e>] ? dev_queue_xmit+0x10d/0x467
[<ffffffffa04a3868>] bond_dev_queue_xmit+0x1cd/0x1f9 [bonding]
[<ffffffffa04a4217>] bond_start_xmit+0x139/0x3e9 [bonding]
[<ffffffff812b0e9a>] queue_process+0xa8/0x160
[<ffffffff812b0df2>] ? queue_process+0x0/0x160
[<ffffffff81003794>] kernel_thread_helper+0x4/0x10
[<ffffffff813362bc>] ? restore_args+0x0/0x30
[<ffffffff81053884>] ? kthread+0x0/0x85
to point out possible locking issues (probably in netpoll_send_skb) that
I would suggest you investigate further. It may point to why we cannot
perform an:
# rmmod bonding
without the system deadlocking (even with my patch above).
> ---
>
> Index: linux-2.6/drivers/net/bonding/bond_main.c
> ===================================================================
> --- linux-2.6.orig/drivers/net/bonding/bond_main.c
> +++ linux-2.6/drivers/net/bonding/bond_main.c
> @@ -59,6 +59,7 @@
> #include <linux/uaccess.h>
> #include <linux/errno.h>
> #include <linux/netdevice.h>
> +#include <linux/netpoll.h>
> #include <linux/inetdevice.h>
> #include <linux/igmp.h>
> #include <linux/etherdevice.h>
> @@ -430,7 +431,18 @@ int bond_dev_queue_xmit(struct bonding *
> }
>
> skb->priority = 1;
> - dev_queue_xmit(skb);
> +#ifdef CONFIG_NET_POLL_CONTROLLER
> + if (bond->dev->priv_flags & IFF_IN_NETPOLL) {
> + struct netpoll *np = bond->dev->npinfo->netpoll;
> + slave_dev->npinfo = bond->dev->npinfo;
> + np->real_dev = np->dev = skb->dev;
> + slave_dev->priv_flags |= IFF_IN_NETPOLL;
> + netpoll_send_skb(np, skb);
> + slave_dev->priv_flags &= ~IFF_IN_NETPOLL;
> + np->dev = bond->dev;
> + } else
> +#endif
> + dev_queue_xmit(skb);
>
> return 0;
> }
> @@ -1329,6 +1341,60 @@ static void bond_detach_slave(struct bon
> bond->slave_cnt--;
> }
>
> +#ifdef CONFIG_NET_POLL_CONTROLLER
> +static bool slaves_support_netpoll(struct net_device *bond_dev)
> +{
> + struct bonding *bond = netdev_priv(bond_dev);
> + struct slave *slave;
> + int i = 0;
> + bool ret = true;
> +
> + read_lock(&bond->lock);
> + bond_for_each_slave(bond, slave, i) {
> + if ((slave->dev->priv_flags & IFF_DISABLE_NETPOLL)
> + || !slave->dev->netdev_ops->ndo_poll_controller)
> + ret = false;
> + }
> + read_unlock(&bond->lock);
> + return i != 0 && ret;
> +}
> +
> +static void bond_poll_controller(struct net_device *bond_dev)
> +{
> + struct net_device *dev = bond_dev->npinfo->netpoll->real_dev;
> + if (dev != bond_dev)
> + netpoll_poll_dev(dev);
> +}
> +
> +static void bond_netpoll_cleanup(struct net_device *bond_dev)
> +{
> + struct bonding *bond = netdev_priv(bond_dev);
> + struct slave *slave;
> + const struct net_device_ops *ops;
> + int i;
> +
> + read_lock(&bond->lock);
> + bond_dev->npinfo = NULL;
> + bond_for_each_slave(bond, slave, i) {
> + if (slave->dev) {
> + ops = slave->dev->netdev_ops;
> + if (ops->ndo_netpoll_cleanup)
> + ops->ndo_netpoll_cleanup(slave->dev);
> + else
> + slave->dev->npinfo = NULL;
> + }
> + }
> + read_unlock(&bond->lock);
> +}
> +
> +#else
> +
> +static void bond_netpoll_cleanup(struct net_device *bond_dev)
> +{
> +}
> +
> +#endif
> +
> /*---------------------------------- IOCTL ----------------------------------*/
>
> static int bond_sethwaddr(struct net_device *bond_dev,
> @@ -1746,6 +1812,18 @@ int bond_enslave(struct net_device *bond
> new_slave->state == BOND_STATE_ACTIVE ? "n active" : " backup",
> new_slave->link != BOND_LINK_DOWN ? "n up" : " down");
>
> +#ifdef CONFIG_NET_POLL_CONTROLLER
> + if (slaves_support_netpoll(bond_dev)) {
> + bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL;
> + if (bond_dev->npinfo)
> + slave_dev->npinfo = bond_dev->npinfo;
> + } else if (!(bond_dev->priv_flags & IFF_DISABLE_NETPOLL)) {
> + bond_dev->priv_flags |= IFF_DISABLE_NETPOLL;
> + pr_info("New slave device %s does not support netpoll\n",
> + slave_dev->name);
> + pr_info("Disabling netpoll support for %s\n", bond_dev->name);
> + }
> +#endif
> /* enslave is successful */
> return 0;
>
> @@ -1929,6 +2007,15 @@ int bond_release(struct net_device *bond
>
> netdev_set_master(slave_dev, NULL);
>
> +#ifdef CONFIG_NET_POLL_CONTROLLER
> + if (slaves_support_netpoll(bond_dev))
> + bond_dev->priv_flags &= ~IFF_DISABLE_NETPOLL;
> + if (slave_dev->netdev_ops->ndo_netpoll_cleanup)
> + slave_dev->netdev_ops->ndo_netpoll_cleanup(slave_dev);
> + else
> + slave_dev->npinfo = NULL;
> +#endif
> +
> /* close slave before restoring its mac address */
> dev_close(slave_dev);
>
> @@ -4448,6 +4535,10 @@ static const struct net_device_ops bond_
> .ndo_vlan_rx_register = bond_vlan_rx_register,
> .ndo_vlan_rx_add_vid = bond_vlan_rx_add_vid,
> .ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid,
> +#ifdef CONFIG_NET_POLL_CONTROLLER
> + .ndo_netpoll_cleanup = bond_netpoll_cleanup,
> + .ndo_poll_controller = bond_poll_controller,
> +#endif
> };
>
> static void bond_setup(struct net_device *bond_dev)
> @@ -4533,6 +4624,8 @@ static void bond_uninit(struct net_devic
> {
> struct bonding *bond = netdev_priv(bond_dev);
>
> + bond_netpoll_cleanup(bond_dev);
> +
> /* Release the bonded slaves */
> bond_release_all(bond_dev);
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists