[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20100408132033.GJ3688@pengutronix.de>
Date: Thu, 8 Apr 2010 15:20:33 +0200
From: Sascha Hauer <s.hauer@...gutronix.de>
To: Matthias Kaehlcke <matthias@...hlcke.net>
Cc: netdev@...r.kernel.org
Subject: Re: FEC driver: rcv is not +last
On Thu, Apr 08, 2010 at 12:40:33PM +0200, Matthias Kaehlcke wrote:
> hi,
>
> i have problems with the FEC on a i.MX25 3-Stack board. the kernel is
> v2.6.34-rc2 plus the following patch:
> http://patchwork.ozlabs.org/patch/41235/
>
> the following traces are generated at boot time:
>
> FEC Ethernet Driver
> fec: PHY @ 0x1, ID 0x20005ce1 -- unknown PHY!
> ...
> eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
> ...
> FEC ENET: rcv is not +last
> FEC ENET: rcv is not +last
> FEC ENET: rcv is not +last
> FEC ENET: rcv is not +last
> ...
No idea, I have never seen this message. Does the controller work
besides these messages?
>
> the PHY of the board is a DP83840, which is not supported by the
> driver. could this be the problem? i tried to make the kernel think
> the DP83840 is a DP83848, which is supported, but the behaviour is the
> same except the 'unknown PHY' warning.
This should be solved by the phylib patches recently posted for the fec
driver.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists