netdev - Re: eSwitch management

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <C7F63C44.2ADAE%scofeldm@cisco.com>
Date:	Thu, 22 Apr 2010 17:47:48 -0700
From:	Scott Feldman <scofeldm@...co.com>
To:	Anirban Chakraborty <anirban.chakraborty@...gic.com>,
	David Miller <davem@...emloft.net>
CC:	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"chrisw@...hat.com" <chrisw@...hat.com>,
	Arnd Bergmann <arnd@...db.de>,
	Ameen Rahman <ameen.rahman@...gic.com>,
	Amit Salecha <amit.salecha@...gic.com>,
	Rajesh Borundia <rajesh.borundia@...gic.com>
Subject: Re: eSwitch management

On 4/22/10 4:16 PM, "Anirban Chakraborty" <anirban.chakraborty@...gic.com>
wrote:

> I am following the discussions on iovnl patch closely. While it is going to
> take some time for iovnl patch to be reviewed and accepted, what would be the
> interim approach to manage the eswitch in NIC? We need to add support in
> qlcnic driver to configure the eswitch in our 10G NIC. Some of the things that
> we need to set to the switch are setting a port's VLAN, tx bandwidth etc. We
> would like to set these parameters for a bunch of ports at the start of the
> day and set it to the eswitch.

Are any of these settings covered in DCB?  (net/dcb/dcbnl.c).  Maybe you can
get a start there?  Not sure not knowing your device requirements.

-scott

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html