netdev - [PATCH 3/9] netdev: bfin_mac: invalid data cache only once for each new rx skb buffer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1273505954-32588-3-git-send-email-vapier@gentoo.org>
Date:	Mon, 10 May 2010 11:39:08 -0400
From:	Mike Frysinger <vapier@...too.org>
To:	netdev@...r.kernel.org, "David S. Miller" <davem@...emloft.net>
Cc:	uclinux-dist-devel@...ckfin.uclinux.org,
	Sonic Zhang <sonic.zhang@...log.com>
Subject: [PATCH 3/9] netdev: bfin_mac: invalid data cache only once for each new rx skb buffer

From: Sonic Zhang <sonic.zhang@...log.com>

The skb buffer isn't actually used until we finish transferring and pass
it up to higher layers, so only invalidate the range once before we start
receiving actual data.  This also avoids the problem with data invalidating
on Blackfin systems -- there is no invalidate-only, just invalidate+flush.
So when running in writeback mode, there is the small (but not uncommon)
possibility of the flush overwriting valid DMA-ed data from the cache.

Signed-off-by: Sonic Zhang <sonic.zhang@...log.com>
Signed-off-by: Mike Frysinger <vapier@...too.org>
---
 drivers/net/bfin_mac.c |   13 ++++++++-----
 1 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index c888465..f9ba598 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -203,6 +203,11 @@ static int desc_list_init(void)
 			goto init_error;
 		}
 		skb_reserve(new_skb, NET_IP_ALIGN);
+		/* Invidate the data cache of skb->data range when it is write back
+		 * cache. It will prevent overwritting the new data from DMA
+		 */
+		blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
+					 (unsigned long)new_skb->end);
 		r->skb = new_skb;
 
 		/*
@@ -1012,19 +1017,17 @@ static void bfin_mac_rx(struct net_device *dev)
 	}
 	/* reserve 2 bytes for RXDWA padding */
 	skb_reserve(new_skb, NET_IP_ALIGN);
-	current_rx_ptr->skb = new_skb;
-	current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
-
 	/* Invidate the data cache of skb->data range when it is write back
 	 * cache. It will prevent overwritting the new data from DMA
 	 */
 	blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
 					 (unsigned long)new_skb->end);
 
+	current_rx_ptr->skb = new_skb;
+	current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
+
 	len = (unsigned short)((current_rx_ptr->status.status_word) & RX_FRLEN);
 	skb_put(skb, len);
-	blackfin_dcache_invalidate_range((unsigned long)skb->head,
-					 (unsigned long)skb->tail);
 
 	skb->protocol = eth_type_trans(skb, dev);
 
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html