[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1274095334-32362-7-git-send-email-amit.salecha@qlogic.com>
Date: Mon, 17 May 2010 04:22:13 -0700
From: Amit Kumar Salecha <amit.salecha@...gic.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, ameen.rahman@...gic.com
Subject: [PATCH NEXT 6/7] qlcnic: remove unused register
Removing register defines which are not used by Qlgoic CNA device.
Signed-off-by: Amit Kumar Salecha <amit.salecha@...gic.com>
---
drivers/net/qlcnic/qlcnic.h | 2 --
drivers/net/qlcnic/qlcnic_hdr.h | 16 ----------------
drivers/net/qlcnic/qlcnic_init.c | 2 --
drivers/net/qlcnic/qlcnic_main.c | 1 -
4 files changed, 0 insertions(+), 21 deletions(-)
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 2ed34cd..896d40d 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -149,8 +149,6 @@
#define get_next_index(index, length) \
(((index) + 1) & ((length) - 1))
-#define MPORT_MULTI_FUNCTION_MODE 0x2222
-
/*
* Following data structures describe the descriptors that will be used.
* Added fileds of tcpHdrSize and ipHdrSize, The driver needs to do it only when
diff --git a/drivers/net/qlcnic/qlcnic_hdr.h b/drivers/net/qlcnic/qlcnic_hdr.h
index 1374078..ad9d167 100644
--- a/drivers/net/qlcnic/qlcnic_hdr.h
+++ b/drivers/net/qlcnic/qlcnic_hdr.h
@@ -563,32 +563,16 @@ enum {
#define CRB_PF_LINK_SPEED_1 (QLCNIC_REG(0xe8))
#define CRB_PF_LINK_SPEED_2 (QLCNIC_REG(0xec))
-#define CRB_MPORT_MODE (QLCNIC_REG(0xc4))
-#define CRB_DMA_SHIFT (QLCNIC_REG(0xcc))
-
#define CRB_TEMP_STATE (QLCNIC_REG(0x1b4))
#define CRB_V2P_0 (QLCNIC_REG(0x290))
#define CRB_V2P(port) (CRB_V2P_0+((port)*4))
#define CRB_DRIVER_VERSION (QLCNIC_REG(0x2a0))
-#define CRB_SW_INT_MASK_0 (QLCNIC_REG(0x1d8))
-#define CRB_SW_INT_MASK_1 (QLCNIC_REG(0x1e0))
-#define CRB_SW_INT_MASK_2 (QLCNIC_REG(0x1e4))
-#define CRB_SW_INT_MASK_3 (QLCNIC_REG(0x1e8))
-
#define CRB_FW_CAPABILITIES_1 (QLCNIC_CAM_RAM(0x128))
#define CRB_MAC_BLOCK_START (QLCNIC_CAM_RAM(0x1c0))
/*
- * capabilities register, can be used to selectively enable/disable features
- * for backward compability
- */
-#define CRB_NIC_CAPABILITIES_HOST QLCNIC_REG(0x1a8)
-
-#define INTR_SCHEME_PERPORT 0x1
-
-/*
* CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address
* which can be read by the Phantom host to get producer/consumer indexes from
* Phantom/Casper. If it is not HOST_SHARED_MEMORY, then the following
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
index dccd8c3..71a4e66 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -1184,8 +1184,6 @@ int qlcnic_init_firmware(struct qlcnic_adapter *adapter)
if (err)
return err;
- QLCWR32(adapter, CRB_NIC_CAPABILITIES_HOST, INTR_SCHEME_PERPORT);
- QLCWR32(adapter, CRB_MPORT_MODE, MPORT_MULTI_FUNCTION_MODE);
QLCWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_ACK);
return err;
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index dde1e8a..f8bd1bd 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -606,7 +606,6 @@ qlcnic_start_firmware(struct qlcnic_adapter *adapter)
msleep(1);
}
- QLCWR32(adapter, CRB_DMA_SHIFT, 0x55555555);
QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS1, 0);
QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS2, 0);
--
1.5.6.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists