netdev - Re: [PATCH] phy/marvell: Add special settings for D-Link DNS-323 rev C1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20100517120032.GI22781@pengutronix.de>
Date:	Mon, 17 May 2010 14:00:32 +0200
From:	Wolfram Sang <w.sang@...gutronix.de>
To:	Benjamin Herrenschmidt <benh@...nel.crashing.org>
Cc:	netdev@...r.kernel.org, Nicolas Pitre <nico@...xnic.net>,
	linux-arm-kernel@...ts.infradead.org,
	Herbert Valerio Riedel <hvr@....org>
Subject: Re: [PATCH] phy/marvell: Add special settings for D-Link DNS-323
	rev C1


> The problem is that the fixups are called -after- the config_init()
> callback of the PHY driver. However, the marvell m88e1118 PHY driver
> will unconditionally reset the LEDs setting.

Haven't checked, just an idea: Is it possible to change the init of the driver
to use Read-Modify-Write and thus keep your settings?

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

Download attachment "signature.asc" of type "application/pgp-signature" (198 bytes)