| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4BF56CA6.8080306@ans.pl> Date: Thu, 20 May 2010 19:08:54 +0200 From: Krzysztof Olędzki <ole@....pl> To: Eilon Greenstein <eilong@...adcom.com>, Michael Chan <mchan@...adcom.com> CC: netdev@...r.kernel.org Subject: bnx2x + SFP+ DA/2.6.33.3: Got bad status 0x0 when reading from SFP+ EEPROM -> SFP+ module is not initialized Hello, I would like to connect a dual port SFP+ NetXtreme II BCM57711 10-Gigabit NIC to a HP J9309A ProCurve 4-Port 10GbE SFP+ zl Module using a HP ProCurve 10-GbE SFP+ 7m Direct Attach Cable (J9285B). Unfortuantely, it does not work. :( After connecting the switch and the server together and loading the bnx2x module the switch logs: I 05/20/10 18:32:23 ports: port E4 is Blocked by STP I 05/20/10 18:32:23 ports: port E4 is now on-line Here is the dmesg output from the server: Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.52.1-5 (2009/11/09) bnx2x 0000:04:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38 bnx2x 0000:04:00.0: setting latency timer to 64 bnx2x: part number 394D4342-31373735-31314131-473331 bnx2x: Loading bnx2x-e1h-5.2.7.0.fw bnx2x 0000:04:00.0: firmware: requesting bnx2x-e1h-5.2.7.0.fw eth4: Broadcom NetXtreme II BCM57711 XGb (A0) PCI-E x8 5GHz (Gen2) found at mem dc000000, IRQ 38, node addr 00:10:18:5f:e4:b4 bnx2x 0000:04:00.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45 bnx2x 0000:04:00.1: setting latency timer to 64 bnx2x: part number 394D4342-31373735-31314131-473331 bnx2x: Loading bnx2x-e1h-5.2.7.0.fw bnx2x 0000:04:00.1: firmware: requesting bnx2x-e1h-5.2.7.0.fw eth5: Broadcom NetXtreme II BCM57711 XGb (A0) PCI-E x8 5GHz (Gen2) found at mem dd000000, IRQ 45, node addr 00:10:18:5f:e4:b6 bnx2x 0000:04:00.0: irq 97 for MSI/MSI-X bnx2x 0000:04:00.0: irq 98 for MSI/MSI-X bnx2x 0000:04:00.0: irq 99 for MSI/MSI-X bnx2x 0000:04:00.0: irq 100 for MSI/MSI-X bnx2x 0000:04:00.0: irq 101 for MSI/MSI-X bnx2x 0000:04:00.0: irq 102 for MSI/MSI-X bnx2x: eth4: using MSI-X IRQs: sp 97 fp[0] 99 ... fp[3] 102 ADDRCONF(NETDEV_UP): eth4: link is not ready bnx2x 0000:04:00.1: irq 103 for MSI/MSI-X bnx2x 0000:04:00.1: irq 104 for MSI/MSI-X bnx2x 0000:04:00.1: irq 105 for MSI/MSI-X bnx2x 0000:04:00.1: irq 106 for MSI/MSI-X bnx2x 0000:04:00.1: irq 107 for MSI/MSI-X bnx2x 0000:04:00.1: irq 108 for MSI/MSI-X bnx2x: eth5: using MSI-X IRQs: sp 103 fp[0] 105 ... fp[3] 108 ADDRCONF(NETDEV_UP): eth5: link is not ready bnx2x: eth5 NIC Link is Down bnx2x: eth5 NIC Link is Down Loading the driver with debug mode enabled (modprobe bnx2x debug=0x20004) I got: bnx2x 0000:04:00.1: irq 103 for MSI/MSI-X bnx2x 0000:04:00.1: irq 104 for MSI/MSI-X bnx2x 0000:04:00.1: irq 105 for MSI/MSI-X bnx2x 0000:04:00.1: irq 106 for MSI/MSI-X bnx2x 0000:04:00.1: irq 107 for MSI/MSI-X bnx2x 0000:04:00.1: irq 108 for MSI/MSI-X bnx2x: eth5: using MSI-X IRQs: sp 103 fp[0] 105 ... fp[3] 108 [bnx2x_nic_load:7524(eth5)]pmf 1 [bnx2x_link_reset:6171(eth5)]Resetting the link of port 1 [bnx2x_set_led:5804(eth5)]bnx2x_set_led: port 1, mode 0 [bnx2x_set_led:5806(eth5)]speed 0x0, hw_led_mode 0x1 [bnx2x_stats_init:4597(eth5)]port_stx 0xa72f4 func_stx 0x0 [bnx2x_phy_init:5966(eth5)]Phy Initialization started [bnx2x_phy_init:5968(eth5)]req_speed 10000, req_flowctrl 0 [bnx2x_emac_init:255(eth5)]EMAC reset reg is 1024 [bnx2x_phy_deassert:534(eth5)]bnx2x_phy_deassert:XGXS [bnx2x_phy_init:6140(eth5)]Phy address = 0x1 [bnx2x_ext_phy_reset:2092(eth5)]Port 1: bnx2x_ext_phy_reset [bnx2x_calc_ieee_aneg_adv:1383(eth5)]ieee_fc = 0x1a0 [bnx2x_ext_phy_init:3672(eth5)]control reg 0x2040 (after 0 ms) [bnx2x_ext_phy_init:4136(eth5)]Initializing BCM8727 [bnx2x_ext_phy_init:4285(eth5)]Setting TX_CTRL1 0xc000,TX_CTRL2 0x40 [bnx2x_link_int_enable:5338(eth5)]enabled XGXS interrupt [bnx2x_link_int_enable:5345(eth5)]enabled external phy int [bnx2x_link_int_enable:5366(eth5)]port 1, is_xgxs 1, int_status 0x0 [bnx2x_link_int_enable:5370(eth5)] int_mask 0x3c8001, MI_INT 1, SERDES_LINK 0 [bnx2x_link_int_enable:5373(eth5)] 10G 0, XGXS_LINK 0 [bnx2x_stats_handle:4469(eth5)]state 0 -> event 3 -> state 0 [bnx2x_link_update:6375(eth5)]port 1, XGXS?1, int_status 0x0 [bnx2x_link_update:6383(eth5)]int_mask 0x0 MI_INT 1, SERDES_LINK 0 [bnx2x_link_update:6387(eth5)] 10G 0, XGXS_LINK 0 [bnx2x_ext_phy_is_link_up:4809(eth5)]8727 RX_ALARM_STATUS 0x439 ADDRCONF(NETDEV_UP): eth5: link is not ready [bnx2x_ext_phy_is_link_up:4819(eth5)]8727 LASI status 0x6 [bnx2x_8727_handle_mod_abs:4622(eth5)]MOD_ABS indication show module is present [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_read_sfp_module_eeprom:2818(eth5)]Got bad status 0x0 when reading from SFP+ EEPROM [bnx2x_8727_handle_mod_abs:4660(eth5)]SFP+ module is not initialized [bnx2x_8727_handle_mod_abs:4664(eth5)]8727 RX_ALARM_STATUS 0x438 [bnx2x_ext_phy_is_link_up:4916(eth5)]Tx is disabled [bnx2x_link_settings_status:1958(eth5)]phy link down [bnx2x_link_settings_status:1976(eth5)]gp_status 0x208 phy_link_up 0 line_speed 2710 [bnx2x_link_settings_status:1980(eth5)]duplex 1 flow_ctrl 0x400 autoneg 0x0 [bnx2x_link_settings_status:1981(eth5)]link_status 0x0 [bnx2x_update_link_down:6285(eth5)]Port 1: Link is down [bnx2x_set_led:5804(eth5)]bnx2x_set_led: port 1, mode 0 [bnx2x_set_led:5806(eth5)]speed 0x0, hw_led_mode 0x1 bnx2x: eth5 NIC Link is Down [bnx2x_stats_handle:4469(eth5)]state 0 -> event 3 -> state 0 [bnx2x_link_update:6375(eth5)]port 1, XGXS?1, int_status 0x0 [bnx2x_link_update:6383(eth5)]int_mask 0x0 MI_INT 1, SERDES_LINK 0 [bnx2x_link_update:6387(eth5)] 10G 0, XGXS_LINK 0 [bnx2x_ext_phy_is_link_up:4809(eth5)]8727 RX_ALARM_STATUS 0x41c [bnx2x_ext_phy_is_link_up:4819(eth5)]8727 LASI status 0x2 [bnx2x_ext_phy_is_link_up:4916(eth5)]Tx is disabled [bnx2x_link_settings_status:1958(eth5)]phy link down [bnx2x_link_settings_status:1976(eth5)]gp_status 0x208 phy_link_up 0 line_speed 0 [bnx2x_link_settings_status:1980(eth5)]duplex 1 flow_ctrl 0x400 autoneg 0x0 [bnx2x_link_settings_status:1981(eth5)]link_status 0x0 [bnx2x_update_link_down:6285(eth5)]Port 1: Link is down [bnx2x_set_led:5804(eth5)]bnx2x_set_led: port 1, mode 0 [bnx2x_set_led:5806(eth5)]speed 0x0, hw_led_mode 0x1 bnx2x: eth5 NIC Link is Down # uname -r 2.6.33.3 Is there something I can do to fix this? Like for example kernel/driver or the firmware upgrade? Best regards, Krzysztof Olędzki -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists