| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <19461.26529.591960.912204@pilspetsen.it.uu.se> Date: Tue, 1 Jun 2010 22:03:45 +0200 From: Mikael Pettersson <mikpe@...uu.se> To: netdev@...r.kernel.org Cc: Matt Carlson <mcarlson@...adcom.com>, linux-kernel@...r.kernel.org Subject: [2.6.35-rc1 regression] tg3 vpd r/w failed Booting 2.6.35-rc1 on a Sun Blade 2500 Red with builtin tg3 I get: tg3.c:v3.110 (April 9, 2010) PCI: Enabling device: (0000:00:03.0), cmd 2 ... tg3 0000:00:03.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:00:03.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:00:03.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:00:03.0: eth0: Tigon3 [partno(none) rev 1002] (PCI:66MHz:64-bit) MAC address ... tg3 0000:00:03.0: eth0: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1]) tg3 0000:00:03.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:00:03.0: eth0: dma_rwctrl[763f0000] dma_mask[32-bit] ... tg3 0000:00:03.0: eth0: No firmware running tg3 0000:00:03.0: eth0: Link is up at 100 Mbps, full duplex tg3 0000:00:03.0: eth0: Flow control is on for TX and on for RX The three 'vpd r/w failed' messages are new and did not occur with 2.6.34 or earlier kernels. /Mikael -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists