netdev - Re: [PATCH] [ath5k][leds] Ability to disable leds support. If leds support enabled do not force mac802.11 leds layer selection.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <AANLkTinFCuqgvnEGFmssL5R1J9-Yx7JB8mO9yKdXuYUj@mail.gmail.com>
Date:	Tue, 1 Jun 2010 16:34:30 -0400
From:	Bob Copeland <me@...copeland.com>
To:	Dmytro Milinevskyy <milinevskyy@...il.com>
Cc:	ath5k-devel@...ts.ath5k.org, Jiri Slaby <jirislaby@...il.com>,
	Nick Kossifidis <mickflemm@...il.com>,
	"Luis R. Rodriguez" <lrodriguez@...eros.com>,
	"John W. Linville" <linville@...driver.com>,
	GeunSik Lim <geunsik.lim@...sung.com>,
	Greg Kroah-Hartman <gregkh@...e.de>,
	Lukas Turek <8an@...ha12.net>,
	Mark Hindley <mark@...dley.org.uk>,
	Johannes Berg <johannes@...solutions.net>,
	Jiri Kosina <jkosina@...e.cz>, Kalle Valo <kalle.valo@....fi>,
	Keng-Yu Lin <keng-yu.lin@...onical.com>,
	Luca Verdesca <magooz@...ug.it>,
	Shahar Or <shahar@...har-or.co.il>,
	linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH] [ath5k][leds] Ability to disable leds support. If leds 
	support enabled do not force mac802.11 leds layer selection.

On Wed, Apr 7, 2010 at 2:58 PM, Dmytro Milinevskyy
<milinevskyy@...il.com> wrote:
> Hello!

Thanks, comments inline.


> +config ATH5K_LEDS
> +       tristate "Atheros 5xxx wireless cards LEDs support"
> +       depends on ATH5K
> +       ---help---
> +         Atheros 5xxx LED support.
> +

This can select the proper LED classes?  Then you can get rid of another
ifdef check later.

> -/* GPIO-controlled software LED */
> -#define AR5K_SOFTLED_PIN       0
> -#define AR5K_SOFTLED_ON                0
> -#define AR5K_SOFTLED_OFF       1
> -

Please drop this hunk, no problem keeping it around.

> +#ifdef CONFIG_ATH5K_LEDS
>  /* LED functions */
>  int ath5k_init_leds(struct ath5k_softc *sc);
>  void ath5k_led_enable(struct ath5k_softc *sc);
>  void ath5k_led_off(struct ath5k_softc *sc);
>  void ath5k_unregister_leds(struct ath5k_softc *sc);
> +#else
> +#define ath5k_init_leds(sc) do {} while (0)
> +#define ath5k_led_enable(sc) do {} while (0)
> +#define ath5k_led_off(sc) do {} while (0)
> +#define ath5k_unregister_leds(sc) do {} while (0)
> +#endif

I prefer:

#ifdef
...
#else
static inline int ath5k_init_leds(struct ath5k_softc *sc)
{
    return 0;
}
...
#endif

so you get type-checking.  Also this doesn't quite work in your version:

    int foo = ath5k_init_leds(sc);

> +#ifdef CONFIG_ATH5K_LEDS
>  /*
>  * State for LED triggers
>  */
>  struct ath5k_led
>  {
> -       char name[ATH5K_LED_MAX_NAME_LEN + 1];  /* name of the LED in sysfs */
>        struct ath5k_softc *sc;                 /* driver state */
> +#ifdef CONFIG_LEDS_CLASS
> +       char name[ATH5K_LED_MAX_NAME_LEN + 1];  /* name of the LED in sysfs */
>        struct led_classdev led_dev;            /* led classdev */
> +#endif
>  };
> +#endif

Why move name?

>  /* Rfkill */
>  struct ath5k_rfkill {
> @@ -186,9 +190,6 @@ struct ath5k_softc {
>
>        u8                      bssidmask[ETH_ALEN];
>
> -       unsigned int            led_pin,        /* GPIO pin for driving LED */
> -                               led_on;         /* pin setting for LED on */
> -
>        struct tasklet_struct   restq;          /* reset tasklet */
>
>        unsigned int            rxbufsize;      /* rx size based on mtu */
> @@ -196,7 +197,6 @@ struct ath5k_softc {
>        spinlock_t              rxbuflock;
>        u32                     *rxlink;        /* link ptr in last RX desc */
>        struct tasklet_struct   rxtq;           /* rx intr tasklet */
> -       struct ath5k_led        rx_led;         /* rx led */
>
>        struct list_head        txbuf;          /* transmit buffer */
>        spinlock_t              txbuflock;
> @@ -204,7 +204,14 @@ struct ath5k_softc {
>        struct ath5k_txq        txqs[AR5K_NUM_TX_QUEUES];       /* tx queues */
>        struct ath5k_txq        *txq;           /* main tx queue */
>        struct tasklet_struct   txtq;           /* tx intr tasklet */
> +
> +
> +#ifdef CONFIG_ATH5K_LEDS
> +       unsigned int            led_pin,        /* GPIO pin for driving LED */
> +                               led_on;         /* pin setting for LED on */
> +       struct ath5k_led        rx_led;         /* rx led */
>        struct ath5k_led        tx_led;         /* tx led */
> +#endif

You might want to do this in two stages: move the led-dependent things
together in the structure (or into a separate structure) and then only
have one #ifdef section.

Still too many ifdefs in general.

-- 
Bob Copeland %% www.bobcopeland.com
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html