| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100616232725.4834.10327.stgit@localhost.localdomain>
Date: Wed, 16 Jun 2010 16:27:28 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, gospo@...hat.com, bphilips@...ell.com,
Bruce Allan <bruce.w.allan@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next-2.6 PATCH 5/8] e1000e: initial support for 82579 LOMs
From: Bruce Allan <bruce.w.allan@...el.com>
Signed-off-by: Bruce Allan <bruce.w.allan@...el.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/e1000e/defines.h | 2
drivers/net/e1000e/e1000.h | 4 +
drivers/net/e1000e/ethtool.c | 13 ++
drivers/net/e1000e/hw.h | 12 +-
drivers/net/e1000e/ich8lan.c | 328 ++++++++++++++++++++++++++++++++++++++++--
drivers/net/e1000e/netdev.c | 70 ++++++---
drivers/net/e1000e/phy.c | 3
7 files changed, 386 insertions(+), 46 deletions(-)
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 4dc02c7..5a6de34 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -359,6 +359,7 @@
#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008
#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
+#define E1000_EXTCNF_CTRL_GATE_PHY_CFG 0x00000080
#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000
#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16
#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK 0x0FFF0000
@@ -714,6 +715,7 @@
#define BME1000_E_PHY_ID_R2 0x01410CB1
#define I82577_E_PHY_ID 0x01540050
#define I82578_E_PHY_ID 0x004DD040
+#define I82579_E_PHY_ID 0x01540090
/* M88E1000 Specific Registers */
#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 79e7c4c..0e59f15 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -164,6 +164,7 @@ enum e1000_boards {
board_ich9lan,
board_ich10lan,
board_pchlan,
+ board_pch2lan,
};
struct e1000_queue_stats {
@@ -477,6 +478,7 @@ extern struct e1000_info e1000_ich8_info;
extern struct e1000_info e1000_ich9_info;
extern struct e1000_info e1000_ich10_info;
extern struct e1000_info e1000_pch_info;
+extern struct e1000_info e1000_pch2_info;
extern struct e1000_info e1000_es2_info;
extern s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num);
@@ -495,6 +497,8 @@ extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
+extern s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
+extern void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 86c6a26..312c704 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -880,6 +880,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
switch (mac->type) {
case e1000_ich10lan:
case e1000_pchlan:
+ case e1000_pch2lan:
mask |= (1 << 18);
break;
default:
@@ -1321,6 +1322,17 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
/* Workaround: K1 must be disabled for stable 1Gbps operation */
e1000_configure_k1_ich8lan(hw, false);
break;
+ case e1000_phy_82579:
+ /* Disable PHY energy detect power down */
+ e1e_rphy(hw, PHY_REG(0, 21), &phy_reg);
+ e1e_wphy(hw, PHY_REG(0, 21), phy_reg & ~(1 << 3));
+ /* Disable full chip energy detect */
+ e1e_rphy(hw, PHY_REG(776, 18), &phy_reg);
+ e1e_wphy(hw, PHY_REG(776, 18), phy_reg | 1);
+ /* Enable loopback on the PHY */
+#define I82577_PHY_LBK_CTRL 19
+ e1e_wphy(hw, I82577_PHY_LBK_CTRL, 0x8001);
+ break;
default:
break;
}
@@ -1878,6 +1890,7 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
if ((hw->phy.type == e1000_phy_ife) ||
(hw->mac.type == e1000_pchlan) ||
+ (hw->mac.type == e1000_pch2lan) ||
(hw->mac.type == e1000_82583) ||
(hw->mac.type == e1000_82574)) {
INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 5d1220d..96116ce 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -217,7 +217,10 @@ enum e1e_registers {
E1000_SWSM = 0x05B50, /* SW Semaphore */
E1000_FWSM = 0x05B54, /* FW Semaphore */
E1000_SWSM2 = 0x05B58, /* Driver-only SW semaphore */
- E1000_CRC_OFFSET = 0x05F50, /* CRC Offset register */
+ E1000_FFLT_DBG = 0x05F04, /* Debug Register */
+ E1000_PCH_RAICC_BASE = 0x05F50, /* Receive Address Initial CRC */
+#define E1000_PCH_RAICC(_n) (E1000_PCH_RAICC_BASE + ((_n) * 4))
+#define E1000_CRC_OFFSET E1000_PCH_RAICC_BASE
E1000_HICR = 0x08F00, /* Host Interface Control */
};
@@ -303,13 +306,14 @@ enum e1e_registers {
#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000
#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16
#define E1000_KMRNCTRLSTA_REN 0x00200000
+#define E1000_KMRNCTRLSTA_CTRL_OFFSET 0x1 /* Kumeran Control */
#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */
#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */
#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */
#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */
#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7
#define E1000_KMRNCTRLSTA_K1_ENABLE 0x140E
-#define E1000_KMRNCTRLSTA_K1_DISABLE 0x1400
+#define E1000_KMRNCTRLSTA_HD_CTRL 0x0002
#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10
#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */
@@ -387,6 +391,8 @@ enum e1e_registers {
#define E1000_DEV_ID_PCH_M_HV_LC 0x10EB
#define E1000_DEV_ID_PCH_D_HV_DM 0x10EF
#define E1000_DEV_ID_PCH_D_HV_DC 0x10F0
+#define E1000_DEV_ID_PCH2_LV_LM 0x1502
+#define E1000_DEV_ID_PCH2_LV_V 0x1503
#define E1000_REVISION_4 4
@@ -406,6 +412,7 @@ enum e1000_mac_type {
e1000_ich9lan,
e1000_ich10lan,
e1000_pchlan,
+ e1000_pch2lan,
};
enum e1000_media_type {
@@ -442,6 +449,7 @@ enum e1000_phy_type {
e1000_phy_bm,
e1000_phy_82578,
e1000_phy_82577,
+ e1000_phy_82579,
};
enum e1000_bus_width {
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 7e2f98c..8274499 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -52,6 +52,8 @@
* 82577LC Gigabit Network Connection
* 82578DM Gigabit Network Connection
* 82578DC Gigabit Network Connection
+ * 82579LM Gigabit Network Connection
+ * 82579V Gigabit Network Connection
*/
#include "e1000.h"
@@ -126,6 +128,9 @@
#define HV_SMB_ADDR_PEC_EN 0x0200
#define HV_SMB_ADDR_VALID 0x0080
+/* PHY Power Management Control */
+#define HV_PM_CTRL PHY_REG(770, 17)
+
/* Strapping Option Register - RO */
#define E1000_STRAP 0x0000C
#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000
@@ -279,13 +284,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ /*
+ * The MAC-PHY interconnect may still be in SMBus mode
+ * after Sx->S0. If the manageability engine (ME) is
+ * disabled, then toggle the LANPHYPC Value bit to force
+ * the interconnect to PCIe mode.
+ */
if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
- /*
- * The MAC-PHY interconnect may still be in SMBus mode
- * after Sx->S0. Toggle the LANPHYPC Value bit to force
- * the interconnect to PCIe mode, but only if there is no
- * firmware present otherwise firmware will have done it.
- */
ctrl = er32(CTRL);
ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
@@ -326,6 +331,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
switch (phy->type) {
case e1000_phy_82577:
+ case e1000_phy_82579:
phy->ops.check_polarity = e1000_check_polarity_82577;
phy->ops.force_speed_duplex =
e1000_phy_force_speed_duplex_82577;
@@ -530,6 +536,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
mac->ops.led_off = e1000_led_off_ich8lan;
break;
case e1000_pchlan:
+ case e1000_pch2lan:
/* check management mode */
mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
/* ID LED init */
@@ -550,6 +557,14 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
if (mac->type == e1000_ich8lan)
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
+ /* Disable PHY configuration by hardware, config by software */
+ if (mac->type == e1000_pch2lan) {
+ u32 extcnf_ctrl = er32(EXTCNF_CTRL);
+
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+ }
+
return 0;
}
@@ -653,10 +668,19 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
if (rc)
return rc;
- if (hw->mac.type == e1000_pchlan)
- rc = e1000_init_phy_params_pchlan(hw);
- else
+ switch (hw->mac.type) {
+ case e1000_ich8lan:
+ case e1000_ich9lan:
+ case e1000_ich10lan:
rc = e1000_init_phy_params_ich8lan(hw);
+ break;
+ case e1000_pchlan:
+ case e1000_pch2lan:
+ rc = e1000_init_phy_params_pchlan(hw);
+ break;
+ default:
+ break;
+ }
if (rc)
return rc;
@@ -861,6 +885,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
}
/* Fall-thru */
case e1000_pchlan:
+ case e1000_pch2lan:
sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
break;
default:
@@ -880,8 +905,10 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
* extended configuration before SW configuration
*/
data = er32(EXTCNF_CTRL);
- if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
- goto out;
+ if (!(hw->mac.type == e1000_pch2lan)) {
+ if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
+ goto out;
+ }
cnf_size = er32(EXTCNF_SIZE);
cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
@@ -893,7 +920,8 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
- (hw->mac.type == e1000_pchlan)) {
+ ((hw->mac.type == e1000_pchlan) ||
+ (hw->mac.type == e1000_pch2lan))) {
/*
* HW configures the SMBus address and LEDs when the
* OEM and LCD Write Enable bits are set in the NVM.
@@ -1100,16 +1128,18 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
u32 mac_reg;
u16 oem_reg;
- if (hw->mac.type != e1000_pchlan)
+ if ((hw->mac.type != e1000_pch2lan) && (hw->mac.type != e1000_pchlan))
return ret_val;
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
return ret_val;
- mac_reg = er32(EXTCNF_CTRL);
- if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
- goto out;
+ if (!(hw->mac.type == e1000_pch2lan)) {
+ mac_reg = er32(EXTCNF_CTRL);
+ if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
+ goto out;
+ }
mac_reg = er32(FEXTNVM);
if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
@@ -1250,6 +1280,243 @@ out:
}
/**
+ * e1000_copy_rx_addrs_to_phy_ich8lan - Copy Rx addresses from MAC to PHY
+ * @hw: pointer to the HW structure
+ **/
+void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
+{
+ u32 mac_reg;
+ u16 i;
+
+ /* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */
+ for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
+ mac_reg = er32(RAL(i));
+ e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
+ e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
+ mac_reg = er32(RAH(i));
+ e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
+ e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0x8000));
+ }
+}
+
+static u32 e1000_calc_rx_da_crc(u8 mac[])
+{
+ u32 poly = 0xEDB88320; /* Polynomial for 802.3 CRC calculation */
+ u32 i, j, mask, crc;
+
+ crc = 0xffffffff;
+ for (i = 0; i < 6; i++) {
+ crc = crc ^ mac[i];
+ for (j = 8; j > 0; j--) {
+ mask = (crc & 1) * (-1);
+ crc = (crc >> 1) ^ (poly & mask);
+ }
+ }
+ return ~crc;
+}
+
+/**
+ * e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation
+ * with 82579 PHY
+ * @hw: pointer to the HW structure
+ * @enable: flag to enable/disable workaround when enabling/disabling jumbos
+ **/
+s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
+{
+ s32 ret_val = 0;
+ u16 phy_reg, data;
+ u32 mac_reg;
+ u16 i;
+
+ if (hw->mac.type != e1000_pch2lan)
+ goto out;
+
+ /* disable Rx path while enabling/disabling workaround */
+ e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg | (1 << 14));
+ if (ret_val)
+ goto out;
+
+ if (enable) {
+ /*
+ * Write Rx addresses (rar_entry_count for RAL/H, +4 for
+ * SHRAL/H) and initial CRC values to the MAC
+ */
+ for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
+ u8 mac_addr[ETH_ALEN] = {0};
+ u32 addr_high, addr_low;
+
+ addr_high = er32(RAH(i));
+ if (!(addr_high & E1000_RAH_AV))
+ continue;
+ addr_low = er32(RAL(i));
+ mac_addr[0] = (addr_low & 0xFF);
+ mac_addr[1] = ((addr_low >> 8) & 0xFF);
+ mac_addr[2] = ((addr_low >> 16) & 0xFF);
+ mac_addr[3] = ((addr_low >> 24) & 0xFF);
+ mac_addr[4] = (addr_high & 0xFF);
+ mac_addr[5] = ((addr_high >> 8) & 0xFF);
+
+ ew32(PCH_RAICC(i),
+ e1000_calc_rx_da_crc(mac_addr));
+ }
+
+ /* Write Rx addresses to the PHY */
+ e1000_copy_rx_addrs_to_phy_ich8lan(hw);
+
+ /* Enable jumbo frame workaround in the MAC */
+ mac_reg = er32(FFLT_DBG);
+ mac_reg &= ~(1 << 14);
+ mac_reg |= (7 << 15);
+ ew32(FFLT_DBG, mac_reg);
+
+ mac_reg = er32(RCTL);
+ mac_reg |= E1000_RCTL_SECRC;
+ ew32(RCTL, mac_reg);
+
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ &data);
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ data | (1 << 0));
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ &data);
+ if (ret_val)
+ goto out;
+ data &= ~(0xF << 8);
+ data |= (0xB << 8);
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* Enable jumbo frame workaround in the PHY */
+ e1e_rphy(hw, PHY_REG(769, 20), &data);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14));
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(769, 23), &data);
+ data &= ~(0x7F << 5);
+ data |= (0x37 << 5);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(769, 16), &data);
+ data &= ~(1 << 13);
+ data |= (1 << 12);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(776, 20), &data);
+ data &= ~(0x3FF << 2);
+ data |= (0x1A << 2);
+ ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+ if (ret_val)
+ goto out;
+ ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0xFE00);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, HV_PM_CTRL, &data);
+ ret_val = e1e_wphy(hw, HV_PM_CTRL, data | (1 << 10));
+ if (ret_val)
+ goto out;
+ } else {
+ /* Write MAC register values back to h/w defaults */
+ mac_reg = er32(FFLT_DBG);
+ mac_reg &= ~(0xF << 14);
+ ew32(FFLT_DBG, mac_reg);
+
+ mac_reg = er32(RCTL);
+ mac_reg &= ~E1000_RCTL_SECRC;
+ ew32(FFLT_DBG, mac_reg);
+
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ &data);
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ data & ~(1 << 0));
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ &data);
+ if (ret_val)
+ goto out;
+ data &= ~(0xF << 8);
+ data |= (0xB << 8);
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* Write PHY register values back to h/w defaults */
+ e1e_rphy(hw, PHY_REG(769, 20), &data);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14));
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(769, 23), &data);
+ data &= ~(0x7F << 5);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(769, 16), &data);
+ data &= ~(1 << 12);
+ data |= (1 << 13);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(776, 20), &data);
+ data &= ~(0x3FF << 2);
+ data |= (0x8 << 2);
+ ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+ if (ret_val)
+ goto out;
+ ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0x7E00);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, HV_PM_CTRL, &data);
+ ret_val = e1e_wphy(hw, HV_PM_CTRL, data & ~(1 << 10));
+ if (ret_val)
+ goto out;
+ }
+
+ /* re-enable Rx path after enabling/disabling workaround */
+ ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~(1 << 14));
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_lv_phy_workarounds_ich8lan - A series of Phy workarounds to be
+ * done after every PHY reset.
+ **/
+static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ if (hw->mac.type != e1000_pch2lan)
+ goto out;
+
+ /* Set MDIO slow mode before any other MDIO access */
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+
+out:
+ return ret_val;
+}
+
+/**
* e1000_lan_init_done_ich8lan - Check for PHY config completion
* @hw: pointer to the HW structure
*
@@ -1300,12 +1567,17 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
if (ret_val)
goto out;
break;
+ case e1000_pch2lan:
+ ret_val = e1000_lv_phy_workarounds_ich8lan(hw);
+ if (ret_val)
+ goto out;
+ break;
default:
break;
}
/* Dummy read to clear the phy wakeup bit after lcd reset */
- if (hw->mac.type == e1000_pchlan)
+ if (hw->mac.type >= e1000_pchlan)
e1e_rphy(hw, BM_WUC, ®);
/* Configure the LCD with the extended configuration region in NVM */
@@ -2829,6 +3101,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
ew32(FCTTV, hw->fc.pause_time);
if ((hw->phy.type == e1000_phy_82578) ||
+ (hw->phy.type == e1000_phy_82579) ||
(hw->phy.type == e1000_phy_82577)) {
ew32(FCRTV_PCH, hw->fc.refresh_time);
@@ -2892,6 +3165,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
return ret_val;
break;
case e1000_phy_82577:
+ case e1000_phy_82579:
ret_val = e1000_copper_link_setup_82577(hw);
if (ret_val)
return ret_val;
@@ -3399,6 +3673,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
/* Clear PHY statistics registers */
if ((hw->phy.type == e1000_phy_82578) ||
+ (hw->phy.type == e1000_phy_82579) ||
(hw->phy.type == e1000_phy_82577)) {
hw->phy.ops.read_reg(hw, HV_SCC_UPPER, &phy_data);
hw->phy.ops.read_reg(hw, HV_SCC_LOWER, &phy_data);
@@ -3534,3 +3809,22 @@ struct e1000_info e1000_pch_info = {
.phy_ops = &ich8_phy_ops,
.nvm_ops = &ich8_nvm_ops,
};
+
+struct e1000_info e1000_pch2_info = {
+ .mac = e1000_pch2lan,
+ .flags = FLAG_IS_ICH
+ | FLAG_HAS_WOL
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_AMT
+ | FLAG_HAS_FLASH
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_APME_IN_WUC,
+ .flags2 = FLAG2_HAS_PHY_STATS,
+ .pba = 18,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_ich8lan,
+ .mac_ops = &ich8_mac_ops,
+ .phy_ops = &ich8_phy_ops,
+ .nvm_ops = &ich8_nvm_ops,
+};
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index b4c431d..f296f6f 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -67,6 +67,7 @@ static const struct e1000_info *e1000_info_tbl[] = {
[board_ich9lan] = &e1000_ich9_info,
[board_ich10lan] = &e1000_ich10_info,
[board_pchlan] = &e1000_pch_info,
+ [board_pch2lan] = &e1000_pch2_info,
};
struct e1000_reg_info {
@@ -2723,6 +2724,16 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
e1e_wphy(hw, 22, phy_data);
}
+ /* Workaround Si errata on 82579 - configure jumbo frame flow */
+ if (hw->mac.type == e1000_pch2lan) {
+ s32 ret_val;
+
+ if (rctl & E1000_RCTL_LPE)
+ ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
+ else
+ ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
+ }
+
/* Setup buffer sizes */
rctl &= ~E1000_RCTL_SZ_4096;
rctl |= E1000_RCTL_BSEX;
@@ -3118,7 +3129,27 @@ void e1000e_reset(struct e1000_adapter *adapter)
* with ERT support assuming ERT set to E1000_ERT_2048), or
* - the full Rx FIFO size minus one full frame
*/
- if (hw->mac.type == e1000_pchlan) {
+ if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
+ fc->pause_time = 0xFFFF;
+ else
+ fc->pause_time = E1000_FC_PAUSE_TIME;
+ fc->send_xon = 1;
+ fc->current_mode = fc->requested_mode;
+
+ switch (hw->mac.type) {
+ default:
+ if ((adapter->flags & FLAG_HAS_ERT) &&
+ (adapter->netdev->mtu > ETH_DATA_LEN))
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - (E1000_ERT_2048 << 3)));
+ else
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - adapter->max_frame_size));
+
+ fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+ fc->low_water = fc->high_water - 8;
+ break;
+ case e1000_pchlan:
/*
* Workaround PCH LOM adapter hangs with certain network
* loads. If hangs persist, try disabling Tx flow control.
@@ -3131,26 +3162,15 @@ void e1000e_reset(struct e1000_adapter *adapter)
fc->low_water = 0x3000;
}
fc->refresh_time = 0x1000;
- } else {
- if ((adapter->flags & FLAG_HAS_ERT) &&
- (adapter->netdev->mtu > ETH_DATA_LEN))
- hwm = min(((pba << 10) * 9 / 10),
- ((pba << 10) - (E1000_ERT_2048 << 3)));
- else
- hwm = min(((pba << 10) * 9 / 10),
- ((pba << 10) - adapter->max_frame_size));
-
- fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
- fc->low_water = fc->high_water - 8;
+ break;
+ case e1000_pch2lan:
+ fc->high_water = 0x05C20;
+ fc->low_water = 0x05048;
+ fc->pause_time = 0x0650;
+ fc->refresh_time = 0x0400;
+ break;
}
- if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
- fc->pause_time = 0xFFFF;
- else
- fc->pause_time = E1000_FC_PAUSE_TIME;
- fc->send_xon = 1;
- fc->current_mode = fc->requested_mode;
-
/* Allow time for pending master requests to run */
mac->ops.reset_hw(hw);
@@ -4918,14 +4938,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
int retval = 0;
/* copy MAC RARs to PHY RARs */
- for (i = 0; i < adapter->hw.mac.rar_entry_count; i++) {
- mac_reg = er32(RAL(i));
- e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
- e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
- mac_reg = er32(RAH(i));
- e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
- e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0xFFFF));
- }
+ e1000_copy_rx_addrs_to_phy_ich8lan(hw);
/* copy MAC MTA to PHY MTA */
for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
@@ -5976,6 +5989,9 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan },
+
{ } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index b4ac82d..e471357 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -2319,6 +2319,9 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
case I82577_E_PHY_ID:
phy_type = e1000_phy_82577;
break;
+ case I82579_E_PHY_ID:
+ phy_type = e1000_phy_82579;
+ break;
default:
phy_type = e1000_phy_unknown;
break;
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists