netdev - RE: [PATCH] vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1276770518.2519.1.camel@edumazet-laptop>
Date:	Thu, 17 Jun 2010 12:28:38 +0200
From:	Eric Dumazet <eric.dumazet@...il.com>
To:	Vladislav Zolotarov <vladz@...adcom.com>
Cc:	Arnd Bergmann <arnd@...db.de>, Patrick McHardy <kaber@...sh.net>,
	Pedro Garcia <pedro.netdev@...devamos.com>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	Ben Hutchings <bhutchings@...arflare.com>
Subject: RE: [PATCH] vlan_dev: VLAN 0 should be treated as "no vlan tag"
 (802.1p packet)

Le jeudi 17 juin 2010 à 01:56 -0700, Vladislav Zolotarov a écrit :
> 
> > -----Original Message-----
> > From: netdev-owner@...r.kernel.org [mailto:netdev-owner@...r.kernel.org] On
> > Behalf Of Eric Dumazet
> > Sent: Wednesday, June 16, 2010 9:58 PM
> > To: Arnd Bergmann
> > Cc: Patrick McHardy; Pedro Garcia; netdev@...r.kernel.org; Ben Hutchings
> > Subject: Re: [PATCH] vlan_dev: VLAN 0 should be treated as "no vlan tag"
> > (802.1p packet)
> > 
> > Le mercredi 16 juin 2010 à 20:26 +0200, Arnd Bergmann a écrit :
> > > On Wednesday 16 June 2010 17:28:23 Patrick McHardy wrote:
> > >
> > > > Since we don't have any special VLAN handling in the bridging code, I
> > > > guess it comes down to optionally using a different ethertype value
> > > > (0x88a8) in the VLAN code. We probably also need some indication from
> > > > device drivers whether they are able to add these headers to avoid
> > > > trying to offload tagging in case they're not.
> > >
> > > It's probably a little more than just supporting the new ethertype, but not
> > > much. The outer tag can be handled like our current VLAN module does,
> > > but the standard does not allow a regular frame to be encapsulated
> > directly,
> > > but rather requires one of
> > >
> > > 1. In 802.1ad: an 802.1Q VLAN tag (ethertype 0x8100) followed by the frame
> > > 2. In 802.1ah: A service tag (ethertype 0x88e7) followed by the 802.1Q VLAN
> > tag
> > >    and then the frame.
> > >
> > > Maybe what we can do is extend the vlan code to understand all three frame
> > > formats (q, ad and ah) or at least the first two so we configure both the
> > > provider VID and the Customer VID for the interface in case of 802.1ad but
> > > only the regular VID in 802.1Q.
> > >
> > > Device drivers can then flag whether they support both formats or just
> > > the regular Q tag.
> > >
> > > 	Arnd
> > 
> > Speaking of device drivers, I see bnx2 (hardware accelerated) is able to
> > insert a 8021q tag in case no vlgrp is defined (the 8201q tag that was
> > removed by NIC)... interesting ping pong games, since our 8021q stack
> > will remove it again, eventually.
> > 
> > So VLAN 0 'problem' on bnx2 could be solved with following patch
> > (avoiding this insert if vtag==0)
> > 
> > 
> > 
> > diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
> > index 522de9f..b5d4d05 100644
> > --- a/drivers/net/bnx2.c
> > +++ b/drivers/net/bnx2.c
> > @@ -3192,7 +3192,7 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi,
> > int budget)
> >  				hw_vlan = 1;
> >  			else
> >  #endif
> > -			{
> > +			if (vtag) {
> >  				struct vlan_ethhdr *ve = (struct vlan_ethhdr *)
> >  					__skb_push(skb, 4);
> > 
> > 
> > 
> > --
> 
> This way u will loose all the priority information that was on the VLAN header.

16bits vtag = 0 : there is no priority information.



--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html