netdev - [PATCH 2/3] gianfar: Implement workaround for eTSEC76 erratum

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <20100629210008.GB10905@oksana.dev.rtsoft.ru>
Date:	Wed, 30 Jun 2010 01:00:08 +0400
From:	Anton Vorontsov <avorontsov@...sta.com>
To:	David Miller <davem@...emloft.net>
Cc:	Manfred Rudigier <manfred.rudigier@...cron.at>,
	Sandeep Gopalpet <Sandeep.Kumar@...escale.com>,
	Andy Fleming <afleming@...escale.com>, netdev@...r.kernel.org,
	linuxppc-dev@...abs.org
Subject: [PATCH 2/3] gianfar: Implement workaround for eTSEC76 erratum

MPC8313ECE says:

"For TOE=1 huge or jumbo frames, the data required to generate the
 checksum may exceed the 2500-byte threshold beyond which the controller
 constrains itself to one memory fetch every 256 eTSEC system clocks.

 This throttling threshold is supposed to trigger only when the
 controller has sufficient data to keep transmit active for the duration
 of the memory fetches. The state machine handling this threshold,
 however, fails to take large TOE frames into account. As a result,
 TOE=1 frames larger than 2500 bytes often see excess delays before start
 of transmission."

This patch implements the workaround as suggested by the errata
document, i.e.:

"Limit TOE=1 frames to less than 2500 bytes to avoid excess delays due to
 memory throttling.
 When using packets larger than 2700 bytes, it is recommended to turn TOE
 off."

To be sure, we limit the TOE frames to 2500 bytes, and do software
checksumming instead.

Signed-off-by: Anton Vorontsov <avorontsov@...sta.com>
---
 drivers/net/gianfar.c |   19 +++++++++++++++++++
 drivers/net/gianfar.h |    1 +
 2 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 9c85d05..f8b9693 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -942,6 +942,11 @@ static void gfar_detect_errata(struct gfar_private *priv)
 			(pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
 		priv->errata |= GFAR_ERRATA_74;
 
+	/* MPC8313 and MPC837x all rev */
+	if ((pvr == 0x80850010 && mod == 0x80b0) ||
+			(pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0))
+		priv->errata |= GFAR_ERRATA_76;
+
 	if (priv->errata) {
 #ifdef CONFIG_GIANFAR_ERRATA
 		dev_info(dev, "enabled errata workarounds, flags: 0x%x\n",
@@ -2018,6 +2023,20 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned int nr_frags, nr_txbds, length;
 	union skb_shared_tx *shtx;
 
+	/*
+	 * TOE=1 frames larger than 2500 bytes may see excess delays
+	 * before start of transmission.
+	 */
+	if (unlikely(gfar_has_errata(priv, 76) &&
+			skb->ip_summed == CHECKSUM_PARTIAL &&
+			skb->len > 2500)) {
+		int ret;
+
+		ret = skb_checksum_help(skb);
+		if (ret)
+			return ret;
+	}
+
 	rq = skb->queue_mapping;
 	tx_queue = priv->tx_queue[rq];
 	txq = netdev_get_tx_queue(dev, rq);
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index d1e2986..fb308c8 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -1027,6 +1027,7 @@ struct gfar_priv_grp {
 
 enum gfar_errata {
 	GFAR_ERRATA_74		= 0x01,
+	GFAR_ERRATA_76		= 0x02,
 };
 
 #ifdef CONFIG_GIANFAR_ERRATA
-- 
1.7.0.5

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html