| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <C43529A246480145B0A6D0234BDB0F0D0212A3@MELANITE.micrel.com>
Date: Mon, 28 Jun 2010 18:23:41 -0700
From: "Choi, David" <David.Choi@...rel.Com>
To: <netdev@...r.kernel.org>
Cc: <bhutchings@...arflare.com>
Subject: [PATCH linux-2.6.35-rc3] micrel phy driver - updated(1)
Hello all:
This patch fixes what Ben mentioned, namely duplicated ids.
From: David J. Choi <david.choi@...rel.com>
Body of the explanation: This patch has changes as followings;
-support the interrupt from phy devices from Micrel Inc.
-support more phy devices, ks8737, ks8721, ks8041, ks8051 from Micrel.
-remove vsc8201 because this device was used only internal test at Micrel.
Signed-off-by: David J. Choi <david.choi@...rel.com>
---
--- ./linux-2.6.35-rc3/drivers/net/phy/micrel.c.orig 2010-06-28 17:55:30.000000000 -0700
+++ ./linux-2.6.35-rc3/drivers/net/phy/micrel.c 2010-06-28 18:06:00.000000000 -0700
@@ -12,7 +12,8 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
- * Support : ksz9021 , vsc8201, ks8001
+ * Support : ksz9021 1000/100/10 phy from Micrel
+ * ks8001, ks8737, ks8721, ks8041, ks8051 100/10 phy
*/
#include <linux/kernel.h>
@@ -20,37 +21,146 @@
#include <linux/phy.h>
#define PHY_ID_KSZ9021 0x00221611
-#define PHY_ID_VSC8201 0x000FC413
+#define PHY_ID_KS8737 0x00221720
+#define PHY_ID_KS8041 0x00221510
+#define PHY_ID_KS8051 0x00221550
+/* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */
#define PHY_ID_KS8001 0x0022161A
+/* general Interrupt control/status reg in vendor specific block. */
+#define MII_KSZPHY_INTCS 0x1B
+#define KSZPHY_INTCS_JABBER (1 << 15)
+#define KSZPHY_INTCS_RECEIVE_ERR (1 << 14)
+#define KSZPHY_INTCS_PAGE_RECEIVE (1 << 13)
+#define KSZPHY_INTCS_PARELLEL (1 << 12)
+#define KSZPHY_INTCS_LINK_PARTNER_ACK (1 << 11)
+#define KSZPHY_INTCS_LINK_DOWN (1 << 10)
+#define KSZPHY_INTCS_REMOTE_FAULT (1 << 9)
+#define KSZPHY_INTCS_LINK_UP (1 << 8)
+#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\
+ KSZPHY_INTCS_LINK_DOWN)
+
+/* general PHY control reg in vendor specific block. */
+#define MII_KSZPHY_CTRL 0x1F
+/* bitmap of PHY register to set interrupt mode */
+#define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9)
+#define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14)
+#define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14)
+
+static int kszphy_ack_interrupt(struct phy_device *phydev)
+{
+ /* bit[7..0] int status, which is a read and clear register. */
+ int rc;
+
+ rc = phy_read(phydev, MII_KSZPHY_INTCS);
+
+ return (rc < 0) ? rc : 0;
+}
+
+static int kszphy_set_interrupt(struct phy_device *phydev)
+{
+ int temp;
+ temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ?
+ KSZPHY_INTCS_ALL : 0;
+ return phy_write(phydev, MII_KSZPHY_INTCS, temp);
+}
+
+static int kszphy_config_intr(struct phy_device *phydev)
+{
+ int temp, rc;
+
+ /* set the interrupt pin active low */
+ temp = phy_read(phydev, MII_KSZPHY_CTRL);
+ temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH;
+ phy_write(phydev, MII_KSZPHY_CTRL, temp);
+ rc = kszphy_set_interrupt(phydev);
+ return rc < 0 ? rc : 0;
+}
+
+static int ksz9021_config_intr(struct phy_device *phydev)
+{
+ int temp, rc;
+
+ /* set the interrupt pin active low */
+ temp = phy_read(phydev, MII_KSZPHY_CTRL);
+ temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH;
+ phy_write(phydev, MII_KSZPHY_CTRL, temp);
+ rc = kszphy_set_interrupt(phydev);
+ return rc < 0 ? rc : 0;
+}
+
+static int ks8737_config_intr(struct phy_device *phydev)
+{
+ int temp, rc;
+
+ /* set the interrupt pin active low */
+ temp = phy_read(phydev, MII_KSZPHY_CTRL);
+ temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH;
+ phy_write(phydev, MII_KSZPHY_CTRL, temp);
+ rc = kszphy_set_interrupt(phydev);
+ return rc < 0 ? rc : 0;
+}
static int kszphy_config_init(struct phy_device *phydev)
{
return 0;
}
+static struct phy_driver ks8737_driver = {
+ .phy_id = PHY_ID_KS8737,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KS8737",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = ks8737_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ks8041_driver = {
+ .phy_id = PHY_ID_KS8041,
+ .phy_id_mask = 0x00fffff0,
+ .name = "Micrel KS8041",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
-static struct phy_driver ks8001_driver = {
- .phy_id = PHY_ID_KS8001,
- .name = "Micrel KS8001",
+static struct phy_driver ks8051_driver = {
+ .phy_id = PHY_ID_KS8051,
.phy_id_mask = 0x00fffff0,
- .features = PHY_BASIC_FEATURES,
- .flags = PHY_POLL,
+ .name = "Micrel KS8051",
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
.driver = { .owner = THIS_MODULE,},
};
-static struct phy_driver vsc8201_driver = {
- .phy_id = PHY_ID_VSC8201,
- .name = "Micrel VSC8201",
+static struct phy_driver ks8001_driver = {
+ .phy_id = PHY_ID_KS8001,
+ .name = "Micrel KS8001 or KS8721",
.phy_id_mask = 0x00fffff0,
- .features = PHY_BASIC_FEATURES,
- .flags = PHY_POLL,
+ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = kszphy_config_intr,
.driver = { .owner = THIS_MODULE,},
};
@@ -58,11 +168,14 @@ static struct phy_driver ksz9021_driver
.phy_id = PHY_ID_KSZ9021,
.phy_id_mask = 0x000fff10,
.name = "Micrel KSZ9021 Gigabit PHY",
- .features = PHY_GBIT_FEATURES | SUPPORTED_Pause,
- .flags = PHY_POLL,
+ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
+ | SUPPORTED_Asym_Pause),
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
+ .ack_interrupt = kszphy_ack_interrupt,
+ .config_intr = ksz9021_config_intr,
.driver = { .owner = THIS_MODULE, },
};
@@ -73,17 +186,29 @@ static int __init ksphy_init(void)
ret = phy_driver_register(&ks8001_driver);
if (ret)
goto err1;
- ret = phy_driver_register(&vsc8201_driver);
+
+ ret = phy_driver_register(&ksz9021_driver);
if (ret)
goto err2;
- ret = phy_driver_register(&ksz9021_driver);
+ ret = phy_driver_register(&ks8737_driver);
if (ret)
goto err3;
+ ret = phy_driver_register(&ks8041_driver);
+ if (ret)
+ goto err4;
+ ret = phy_driver_register(&ks8051_driver);
+ if (ret)
+ goto err5;
+
return 0;
+err5:
+ phy_driver_unregister(&ks8041_driver);
+err4:
+ phy_driver_unregister(&ks8737_driver);
err3:
- phy_driver_unregister(&vsc8201_driver);
+ phy_driver_unregister(&ksz9021_driver);
err2:
phy_driver_unregister(&ks8001_driver);
err1:
@@ -93,8 +218,10 @@ err1:
static void __exit ksphy_exit(void)
{
phy_driver_unregister(&ks8001_driver);
- phy_driver_unregister(&vsc8201_driver);
+ phy_driver_unregister(&ks8737_driver);
phy_driver_unregister(&ksz9021_driver);
+ phy_driver_unregister(&ks8041_driver);
+ phy_driver_unregister(&ks8051_driver);
}
module_init(ksphy_init);
@@ -106,8 +233,10 @@ MODULE_LICENSE("GPL");
static struct mdio_device_id micrel_tbl[] = {
{ PHY_ID_KSZ9021, 0x000fff10 },
- { PHY_ID_VSC8201, 0x00fffff0 },
{ PHY_ID_KS8001, 0x00fffff0 },
+ { PHY_ID_KS8737, 0x00fffff0 },
+ { PHY_ID_KS8041, 0x00fffff0 },
+ { PHY_ID_KS8051, 0x00fffff0 },
{ }
};
---
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists