Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34 (root@livecd) (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Thu Jul 1 18:47:08 BRT 2010
Command line: root=/dev/sda1
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
BIOS-e820: 0000000000090000 - 000000000009d000 (usable)
BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cf4bd000 (usable)
BIOS-e820: 00000000cf4bd000 - 00000000cf4bf000 (reserved)
BIOS-e820: 00000000cf4bf000 - 00000000cf4c4000 (usable)
BIOS-e820: 00000000cf4c4000 - 00000000cf7bf000 (ACPI NVS)
BIOS-e820: 00000000cf7bf000 - 00000000cf7df000 (usable)
BIOS-e820: 00000000cf7df000 - 00000000cf7ff000 (ACPI data)
BIOS-e820: 00000000cf7ff000 - 00000000cf800000 (usable)
BIOS-e820: 00000000cf800000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fd000000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
NX (Execute Disable) protection: active
DMI 2.5 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x430000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask E00000000 write-back
5 base 400000000 mask FE0000000 write-back
6 base 420000000 mask FF0000000 write-back
7 base 0FFFF0000 mask FFFFF0000 write-protect
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcf800 max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000008f000 (usable)
modified: 000000000008f000 - 0000000000090000 (reserved)
modified: 0000000000090000 - 000000000009d000 (usable)
modified: 000000000009d000 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000cf4bd000 (usable)
modified: 00000000cf4bd000 - 00000000cf4bf000 (reserved)
modified: 00000000cf4bf000 - 00000000cf4c4000 (usable)
modified: 00000000cf4c4000 - 00000000cf7bf000 (ACPI NVS)
modified: 00000000cf7bf000 - 00000000cf7df000 (usable)
modified: 00000000cf7df000 - 00000000cf7ff000 (ACPI data)
modified: 00000000cf7ff000 - 00000000cf800000 (usable)
modified: 00000000cf800000 - 00000000d0000000 (reserved)
modified: 00000000f8000000 - 00000000fd000000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000430000000 (usable)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cf800000
0000000000 - 00cf800000 page 2M
kernel direct mapping tables up to cf800000 @ 16000-1b000
init_memory_mapping: 0000000100000000-0000000430000000
0100000000 - 0430000000 page 2M
kernel direct mapping tables up to 430000000 @ 19000-2b000
ACPI: RSDP 00000000000fe020 00024 (v02 INTEL )
ACPI: XSDT 00000000cf7fe120 00074 (v01 INTEL  DX58SO   000011F6      01000013)
ACPI: FACP 00000000cf7fd000 000F4 (v03 INTEL  DX58SO   000011F6 MSFT 0100000D)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000450/0 (20100121/tbfadt-557)
ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 (20100121/tbfadt-607)
ACPI: DSDT 00000000cf7f8000 04641 (v02 INTEL  DX58SO   000011F6 MSFT 0100000D)
ACPI: FACS 00000000cf728000 00040
ACPI: APIC 00000000cf7f7000 00138 (v02 INTEL  DX58SO   000011F6 MSFT 0100000D)
ACPI: WDDT 00000000cf7f6000 00040 (v01 INTEL  DX58SO   000011F6 MSFT 0100000D)
ACPI: MCFG 00000000cf7f5000 0003C (v01 INTEL  DX58SO   000011F6 MSFT 0100000D)
ACPI: ASF! 00000000cf7f4000 000AC (v32 INTEL  DX58SO   000011F6 MSFT 0100000D)
ACPI: HPET 00000000cf7f3000 00038 (v01 INTEL  DX58SO   000011F6 MSFT 0100000D)
ACPI: SSDT 00000000cf7e2000 0E134 (v01 INTEL  SSDT  PM 000011F6 MSFT 0100000D)
ACPI: DMAR 00000000cf7df000 00140 (v01 INTEL  DX58SO   000011F6 MSFT 0100000D)
ACPI: WDTT 00000000cf7f1000 0020C (v02 INTEL  DX58SO   000011F6 MSFT 0100000D)
ACPI: ASPT 00000000cf7f2000 00034 (v04 INTEL  PerfTune 000011F6 MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea000ebfffff] PMD -> [ffff880002000000-ffff8800101fffff] on node 0
Zone PFN ranges:
DMA      0x00000010 -> 0x00001000
DMA32    0x00001000 -> 0x00100000
Normal   0x00100000 -> 0x00430000
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000010 -> 0x0000008f
0: 0x00000090 -> 0x0000009d
0: 0x00000100 -> 0x000cf4bd
0: 0x000cf4bf -> 0x000cf4c4
0: 0x000cf7bf -> 0x000cf7df
0: 0x000cf7ff -> 0x000cf800
0: 0x00100000 -> 0x00430000
On node 0 totalpages: 4191343
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3924 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 830747 pages, LIFO batch:31
Normal zone: 45696 pages used for memmap
Normal zone: 3296640 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
16 Processors exceeds NR_CPUS limit of 8
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
early_res array is doubled to 64 at [26000 - 267ff]
PM: Registered nosave memory: 000000000008f000 - 0000000000090000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000cf4bd000 - 00000000cf4bf000
PM: Registered nosave memory: 00000000cf4c4000 - 00000000cf7bf000
PM: Registered nosave memory: 00000000cf7df000 - 00000000cf7ff000
PM: Registered nosave memory: 00000000cf800000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fd000000
PM: Registered nosave memory: 00000000fd000000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:28000000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75880 r8192 d22424 u262144
early_res array is doubled to 128 at [26800 - 277ff]
pcpu-alloc: s75880 r8192 d22424 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4131311
Kernel command line: root=/dev/sda1
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Checking aperture...
No AGP bridge found
Subtract (66 early reservations)
#1 [0001000000 - 0001751214]   TEXT DATA BSS
#2 [000009d000 - 0000100000]   BIOS reserved
#3 [0001752000 - 000175215e]             BRK
#4 [0000010000 - 0000012000]      TRAMPOLINE
#5 [0000012000 - 0000016000]     ACPI WAKEUP
#6 [0000016000 - 0000019000]         PGTABLE
#7 [0000019000 - 0000026000]         PGTABLE
#8 [0001752180 - 0001753180]         BOOTMEM
#9 [0001751240 - 0001751e40]         BOOTMEM
#10 [0001f54000 - 0001f55000]         BOOTMEM
#11 [0001f55000 - 0001f56000]         BOOTMEM
#12 [0002000000 - 0010200000]        MEMMAP 0
#13 [0001751e40 - 0001751fc0]         BOOTMEM
#14 [0001753180 - 000176b180]         BOOTMEM
#15 [000176b180 - 0001783180]         BOOTMEM
#16 [0001784000 - 0001785000]         BOOTMEM
#17 [0001783180 - 00017831c1]         BOOTMEM
#18 [0001783200 - 0001783243]         BOOTMEM
#19 [0001783280 - 0001783638]         BOOTMEM
#20 [0001783640 - 00017836a8]         BOOTMEM
#21 [00017836c0 - 0001783728]         BOOTMEM
#22 [0001783740 - 00017837a8]         BOOTMEM
#23 [00017837c0 - 0001783828]         BOOTMEM
#24 [0001783840 - 00017838a8]         BOOTMEM
#25 [00017838c0 - 0001783928]         BOOTMEM
#26 [0001783940 - 00017839a8]         BOOTMEM
#27 [00017839c0 - 0001783a28]         BOOTMEM
#28 [0001783a40 - 0001783aa8]         BOOTMEM
#29 [0001783ac0 - 0001783b28]         BOOTMEM
#30 [0001783b40 - 0001783ba8]         BOOTMEM
#31 [0001783bc0 - 0001783c28]         BOOTMEM
#32 [0001783c40 - 0001783ca8]         BOOTMEM
#33 [0001783cc0 - 0001783d28]         BOOTMEM
#34 [0001783d40 - 0001783da8]         BOOTMEM
#35 [0001783dc0 - 0001783e28]         BOOTMEM
#36 [0001751fc0 - 0001751fe0]         BOOTMEM
#37 [0001783e40 - 0001783e60]         BOOTMEM
#38 [0001783e80 - 0001783ea0]         BOOTMEM
#39 [0001783ec0 - 0001783ee0]         BOOTMEM
#40 [0001783f00 - 0001783f20]         BOOTMEM
#41 [0001783f40 - 0001783f60]         BOOTMEM
#42 [0001783f80 - 0001783f8f]         BOOTMEM
#43 [0001783fc0 - 0001783fcf]         BOOTMEM
#44 [0001800000 - 000181a000]         BOOTMEM
#45 [0001840000 - 000185a000]         BOOTMEM
#46 [0001880000 - 000189a000]         BOOTMEM
#47 [00018c0000 - 00018da000]         BOOTMEM
#48 [0001900000 - 000191a000]         BOOTMEM
#49 [0001940000 - 000195a000]         BOOTMEM
#50 [0001980000 - 000199a000]         BOOTMEM
#51 [00019c0000 - 00019da000]         BOOTMEM
#52 [0001787000 - 0001787008]         BOOTMEM
#53 [0001787040 - 0001787048]         BOOTMEM
#54 [0001787080 - 00017870a0]         BOOTMEM
#55 [00017870c0 - 0001787100]         BOOTMEM
#56 [0001787100 - 0001787220]         BOOTMEM
#57 [0001787240 - 0001787288]         BOOTMEM
#58 [00017872c0 - 0001787308]         BOOTMEM
#59 [0001787340 - 000178f340]         BOOTMEM
#60 [0010200000 - 0011200000]         BOOTMEM
#61 [0011200000 - 0011a00000]         BOOTMEM
#62 [0011a00000 - 0015a00000]         BOOTMEM
#63 [000178f340 - 00017af340]         BOOTMEM
#64 [00017af340 - 00017ef340]         BOOTMEM
#65 [0000027800 - 000002f800]         BOOTMEM
Memory: 16434752k/17563648k available (4275k kernel code, 798276k absent, 330620k reserved, 2219k data, 444k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2666.892 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.78 BogoMIPS (lpj=2666892)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
ACPI: Core revision 20100121
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz stepping 05
Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (42661.40 BogoMIPS).
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000cbfff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfedfffff]
pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xf7ffffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:19.0: reg 10: [mem 0xd0500000-0xd051ffff]
pci 0000:00:19.0: reg 14: [mem 0xd0523000-0xd0523fff]
pci 0000:00:19.0: reg 18: [io  0x5100-0x511f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0x50e0-0x50ff]
pci 0000:00:1a.1: reg 20: [io  0x50c0-0x50df]
pci 0000:00:1a.2: reg 20: [io  0x50a0-0x50bf]
pci 0000:00:1a.7: reg 10: [mem 0xd0522000-0xd05223ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf0000000-0xf0003fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x5080-0x509f]
pci 0000:00:1d.1: reg 20: [io  0x5060-0x507f]
pci 0000:00:1d.2: reg 20: [io  0x5040-0x505f]
pci 0000:00:1d.7: reg 10: [mem 0xd0521000-0xd05213ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
pci 0000:00:1f.2: reg 10: [io  0x5128-0x512f]
pci 0000:00:1f.2: reg 14: [io  0x5134-0x5137]
pci 0000:00:1f.2: reg 18: [io  0x5120-0x5127]
pci 0000:00:1f.2: reg 1c: [io  0x5130-0x5133]
pci 0000:00:1f.2: reg 20: [io  0x5020-0x503f]
pci 0000:00:1f.2: reg 24: [mem 0xd0520000-0xd05207ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xf0004000-0xf00040ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x5000-0x501f]
pci 0000:01:00.0: reg 10: [mem 0xd0480000-0xd049ffff]
pci 0000:01:00.0: reg 14: [mem 0xd0400000-0xd047ffff]
pci 0000:01:00.0: reg 18: [io  0x4000-0x401f]
pci 0000:01:00.0: reg 1c: [mem 0xd04a0000-0xd04a3fff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xd0400000-0xd04fffff]
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 18: [mem 0xd0300000-0xd030ffff 64bit]
pci 0000:03:00.0: reg 20: [io  0x3000-0x30ff]
pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.1: reg 10: [mem 0xd0310000-0xd0313fff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:07.0:   bridge window [mem 0xd0300000-0xd03fffff]
pci 0000:00:07.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xd0280000-0xd029ffff]
pci 0000:04:00.0: reg 14: [mem 0xd0200000-0xd027ffff]
pci 0000:04:00.0: reg 18: [io  0x2000-0x201f]
pci 0000:04:00.0: reg 1c: [mem 0xd02a0000-0xd02a3fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xd0200000-0xd02fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.1: PCI bridge to [bus 05-05]
pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: reg 10: [io  0x1018-0x101f]
pci 0000:06:00.0: reg 14: [io  0x1024-0x1027]
pci 0000:06:00.0: reg 18: [io  0x1010-0x1017]
pci 0000:06:00.0: reg 1c: [io  0x1020-0x1023]
pci 0000:06:00.0: reg 20: [io  0x1000-0x100f]
pci 0000:06:00.0: reg 24: [mem 0xd0100000-0xd01003ff]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: PME# supported from D0 D1 D3hot
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 06-06]
pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.4:   bridge window [mem 0xd0100000-0xd01fffff]
pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:03.0: reg 10: [mem 0xd0004000-0xd00047ff]
pci 0000:07:03.0: reg 14: [mem 0xd0000000-0xd0003fff]
pci 0000:07:03.0: supports D1 D2
pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:07:03.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000cbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfedfffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000008f000 - 000000000008ffff 
reserve RAM buffer: 000000000009d000 - 000000000009ffff 
reserve RAM buffer: 00000000cf4bd000 - 00000000cfffffff 
reserve RAM buffer: 00000000cf4c4000 - 00000000cfffffff 
reserve RAM buffer: 00000000cf7df000 - 00000000cfffffff 
reserve RAM buffer: 00000000cf800000 - 00000000cfffffff 
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [io  0x0500-0x053f] has been reserved
system 00:05: [io  0x0400-0x047f] has been reserved
system 00:05: [io  0x0680-0x06ff] has been reserved
pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:01.0:   bridge window [mem 0xd0400000-0xd04fffff]
pci 0000:00:01.0:   bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0:   bridge window [io  disabled]
pci 0000:00:03.0:   bridge window [mem disabled]
pci 0000:00:03.0:   bridge window [mem pref disabled]
pci 0000:03:00.0: BAR 6: assigned [mem 0xd0320000-0xd033ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:07.0:   bridge window [mem 0xd0300000-0xd03fffff]
pci 0000:00:07.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04-04]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xd0200000-0xd02fffff]
pci 0000:00:1c.0:   bridge window [mem pref disabled]
pci 0000:00:1c.1: PCI bridge to [bus 05-05]
pci 0000:00:1c.1:   bridge window [io  disabled]
pci 0000:00:1c.1:   bridge window [mem disabled]
pci 0000:00:1c.1:   bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 06-06]
pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.4:   bridge window [mem 0xd0100000-0xd01fffff]
pci 0000:00:1c.4:   bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 07-07]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000cbfff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfedfffff]
pci_bus 0000:00: resource 9 [mem 0xd0000000-0xf7ffffff]
pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd04fffff]
pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xd0300000-0xd03fffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xd0200000-0xd02fffff]
pci_bus 0000:06: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xd0100000-0xd01fffff]
pci_bus 0000:07: resource 1 [mem 0xd0000000-0xd00fffff]
pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000c4000-0x000cbfff]
pci_bus 0000:07: resource 8 [mem 0xfed40000-0xfedfffff]
pci_bus 0000:07: resource 9 [mem 0xd0000000-0xf7ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10
pci 0000:00:1a.0: Performing full reset
pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1a.1: Performing full reset
pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1a.2: Performing full reset
pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10
pci 0000:00:1d.0: Performing full reset
pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.1: Performing full reset
pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
pci 0000:00:1d.2: Performing full reset
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880011a00000 - ffff880015a00000
software IO TLB at phys 0x11a00000 - 0x15a00000
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1278110631.614:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 32099
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:07.0: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 28 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:07.0:pcie02: service driver aer loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xd0520000 port 0xd0520100 irq 30
ata2: SATA max UDMA/133 abar m2048@0xd0520000 port 0xd0520180 irq 30
ata3: SATA max UDMA/133 abar m2048@0xd0520000 port 0xd0520200 irq 30
ata4: SATA max UDMA/133 abar m2048@0xd0520000 port 0xd0520280 irq 30
ata5: SATA max UDMA/133 abar m2048@0xd0520000 port 0xd0520300 irq 30
ata6: SATA max UDMA/133 abar m2048@0xd0520000 port 0xd0520380 irq 30
ahci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:06:00.0: controller can't do NCQ, turning off CAP_NCQ
ahci 0000:06:00.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:06:00.0: MV_AHCI HACK: port_map 7 -> 3
ahci 0000:06:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:06:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode
ahci 0000:06:00.0: flags: 64bit stag led slum part 
ahci 0000:06:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
ata7: SATA max UDMA/133 abar m1024@0xd0100000 port 0xd0100100 irq 16
ata8: SATA max UDMA/133 abar m1024@0xd0100000 port 0xd0100180 irq 16
ata9: DUMMY
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:b2:1d:a2
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff
e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:01:00.0: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
e1000e 0000:01:00.0: irq 32 for MSI/MSI-X
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
e1000e 0000:01:00.0: irq 33 for MSI/MSI-X
alloc irq_desc for 34 on node -1
alloc kstat_irqs on node -1
e1000e 0000:01:00.0: irq 34 for MSI/MSI-X
e1000e 0000:01:00.0: Disabling ASPM L0s 
0000:01:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:22:64:89:75:e6
0000:01:00.0: eth1: Intel(R) PRO/1000 Network Connection
0000:01:00.0: eth1: MAC: 3, PHY: 8, PBA No: e56869-003
e1000e 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:04:00.0: setting latency timer to 64
alloc irq_desc for 35 on node -1
alloc kstat_irqs on node -1
e1000e 0000:04:00.0: irq 35 for MSI/MSI-X
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
e1000e 0000:04:00.0: irq 36 for MSI/MSI-X
alloc irq_desc for 37 on node -1
alloc kstat_irqs on node -1
e1000e 0000:04:00.0: irq 37 for MSI/MSI-X
e1000e 0000:04:00.0: Disabling ASPM L0s 
0000:04:00.0: eth2: (PCI Express:2.5GB/s:Width x1) 00:22:64:89:75:dc
0000:04:00.0: eth2: Intel(R) PRO/1000 Network Connection
0000:04:00.0: eth2: MAC: 3, PHY: 8, PBA No: e56869-003
sky2: driver version 1.27
console [netcon0] enabled
netconsole: network logging started
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: supports USB remote wakeup
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xd0522000
ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata7: SATA link down (SStatus 0 SControl 300)
ata1.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.34 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0521000
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
scsi 0:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg1 type 0
sdb:
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.34 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 20ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 80 td 96
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file '003'
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1a.0: Performing full reset
uhci_hcd 0000:00:1a.0: supports USB remote wakeup
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050e0
usb usb3: default language 0x0409
usb usb3: udev 1, busnum 3, minor = 256
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.34 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
unknown partition table
usb usb3: usb_probe_device
usb usb3: configuration #1 chosen from 1 choice
usb usb3: adding 3-0:1.0 (config #1, interface 0)
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
sd 2:0:0:0: [sdb] Attached SCSI disk
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '004'
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1a.1: Performing full reset
uhci_hcd 0000:00:1a.1: supports USB remote wakeup
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0
usb usb4: default language 0x0409
usb usb4: udev 1, busnum 4, minor = 384
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.34 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
sda1 sda2
usb usb4: usb_probe_device
usb usb4: configuration #1 chosen from 1 choice
usb usb4: adding 4-0:1.0 (config #1, interface 0)
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
sd 0:0:0:0: [sda] Attached SCSI disk
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
hub 4-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
drivers/usb/core/inode.c: creating file '005'
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1a.2: Performing full reset
uhci_hcd 0000:00:1a.2: supports USB remote wakeup
uhci_hcd 0000:00:1a.2: irq 19, io base 0x000050a0
usb usb5: default language 0x0409
usb usb5: udev 1, busnum 5, minor = 512
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.34 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: usb_probe_device
usb usb5: configuration #1 chosen from 1 choice
usb usb5: adding 5-0:1.0 (config #1, interface 0)
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: power on to power good time: 2ms
hub 5-0:1.0: local power source is good
hub 5-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
drivers/usb/core/inode.c: creating file '006'
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.0: Performing full reset
uhci_hcd 0000:00:1d.0: supports USB remote wakeup
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00005080
usb usb6: default language 0x0409
usb usb6: udev 1, busnum 6, minor = 640
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.34 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: usb_probe_device
usb usb6: configuration #1 chosen from 1 choice
usb usb6: adding 6-0:1.0 (config #1, interface 0)
hub 6-0:1.0: usb_probe_interface
hub 6-0:1.0: usb_probe_interface - got id
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
hub 6-0:1.0: standalone hub
hub 6-0:1.0: no power switching (usb 1.0)
hub 6-0:1.0: individual port over-current protection
hub 6-0:1.0: power on to power good time: 2ms
hub 6-0:1.0: local power source is good
hub 6-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
drivers/usb/core/inode.c: creating file '007'
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.1: Performing full reset
uhci_hcd 0000:00:1d.1: supports USB remote wakeup
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005060
usb usb7: default language 0x0409
usb usb7: udev 1, busnum 7, minor = 768
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.34 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: usb_probe_device
usb usb7: configuration #1 chosen from 1 choice
usb usb7: adding 7-0:1.0 (config #1, interface 0)
hub 7-0:1.0: usb_probe_interface
hub 7-0:1.0: usb_probe_interface - got id
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
hub 7-0:1.0: standalone hub
hub 7-0:1.0: no power switching (usb 1.0)
hub 7-0:1.0: individual port over-current protection
hub 7-0:1.0: power on to power good time: 2ms
hub 7-0:1.0: local power source is good
hub 7-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
drivers/usb/core/inode.c: creating file '008'
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
uhci_hcd 0000:00:1d.2: Performing full reset
uhci_hcd 0000:00:1d.2: supports USB remote wakeup
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
usb usb8: default language 0x0409
usb usb8: udev 1, busnum 8, minor = 896
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.34 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: usb_probe_device
usb usb8: configuration #1 chosen from 1 choice
usb usb8: adding 8-0:1.0 (config #1, interface 0)
hub 8-0:1.0: usb_probe_interface
hub 8-0:1.0: usb_probe_interface - got id
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
hub 8-0:1.0: standalone hub
hub 8-0:1.0: no power switching (usb 1.0)
hub 8-0:1.0: individual port over-current protection
hub 8-0:1.0: power on to power good time: 2ms
hub 8-0:1.0: local power source is good
hub 8-0:1.0: trying to enable port power on non-switchable hub
drivers/usb/core/inode.c: creating file '001'
ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
Bridge firewalling registered
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
registered taskstats version 1
ehci_hcd 0000:00:1a.7: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 2: status 0501 change 0001
hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
uhci_hcd 0000:00:1a.0: port 2 portsc 008a,00
hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000
hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
ehci_hcd 0000:00:1a.7: port 2 low speed --> companion
ehci_hcd 0000:00:1a.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0004
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1a.0: port 2 portsc 01a3,00
hub 3-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
ata8: SATA link down (SStatus 0 SControl 300)
hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
usb 3-2: new low speed USB device using uhci_hcd and address 2
XFS mounting filesystem sda1
Ending clean XFS mount for filesystem: sda1
VFS: Mounted root (xfs filesystem) readonly on device 8:1.
Freeing unused kernel memory: 444k freed
usb 3-2: skipped 1 descriptor after interface
usb 3-2: skipped 1 descriptor after interface
usb 3-2: udev 2, busnum 3, minor = 257
usb 3-2: New USB device found, idVendor=04d9, idProduct=1203
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-2: usb_probe_device
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: adding 3-2:1.0 (config #1, interface 0)
usbhid 3-2:1.0: usb_probe_interface
usbhid 3-2:1.0: usb_probe_interface - got id
input: HID 04d9:1203 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
generic-usb 0003:04D9:1203.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-0000:00:1a.0-2/input0
usb 3-2: adding 3-2:1.1 (config #1, interface 1)
usbhid 3-2:1.1: usb_probe_interface
usbhid 3-2:1.1: usb_probe_interface - got id
input: HID 04d9:1203 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input3
uhci_hcd 0000:00:1a.0: reserve dev 2 ep82-INT, period 8, phase 4, 118 us
generic-usb 0003:04D9:1203.0002: input,hidraw1: USB HID v1.11 Device [HID 04d9:1203] on usb-0000:00:1a.0-2/input1
drivers/usb/core/inode.c: creating file '002'
hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004
usb usb4: suspend_rh (auto-stop)
usb usb5: suspend_rh (auto-stop)
usb usb6: suspend_rh (auto-stop)
usb usb7: suspend_rh (auto-stop)
usb usb8: suspend_rh (auto-stop)
udev: starting version 146
Adding 4988176k swap on /dev/sda2.  Priority:-1 extents:1 across:4988176k