| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 19 Jul 2010 16:37:11 +0200
From: Christoph Egger <siccegge@...fau.de>
To: David Miller <davem@...emloft.net>
Cc: joe@...ches.com, shemminger@...tta.com,
dongdong.deng@...driver.com, jkosina@...e.cz,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
vamos-dev@...informatik.uni-erlangen.de
Subject: Re: [PATCH 07/11] Removing dead ARCH_PNX010X
On Wed, Jul 14, 2010 at 01:39:16PM -0700, David Miller wrote:
> From: Christoph Egger <siccegge@...fau.de>
> Date: Wed, 14 Jul 2010 14:41:09 +0200
>
> > ARCH_PNX010X doesn't exist in Kconfig, therefore removing all
> > references for it from the source code.
> >
> > Signed-off-by: Christoph Egger <siccegge@...fau.de>
>
> If you are going to kill this off, kill the references in
> driver/net/Kconfig at the same time.
>
> Please fix this up and resubmit your patch, thanks.
DOne, patch below
Thanks
CHristoph
---
>From ed6ffbfd77e14f17fa7d75ddf70b0d3b0126848c Mon Sep 17 00:00:00 2001
From: Christoph Egger <siccegge@...fau.de>
Date: Wed, 14 Jul 2010 14:19:15 +0200
Subject: [PATCH] Removing dead ARCH_PNX010X
ARCH_PNX010X doesn't exist in Kconfig, therefore removing all
references for it from the source code/Kconfig.
Signed-off-by: Christoph Egger <siccegge@...fau.de>
---
drivers/net/Kconfig | 4 ++--
drivers/net/cs89x0.c | 45 ---------------------------------------------
2 files changed, 2 insertions(+), 47 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ce2fcdd..ba5b862 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1463,7 +1463,7 @@ config FORCEDETH
config CS89x0
tristate "CS89x0 support"
depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
- || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS)
+ || ARCH_IXDP2X01 || MACH_MX31ADS)
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
@@ -1477,7 +1477,7 @@ config CS89x0
config CS89x0_NONISA_IRQ
def_bool y
depends on CS89x0 != n
- depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS
+ depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 2ccb9f1..7a5d787 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -180,12 +180,6 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0};
#elif defined(CONFIG_ARCH_IXDP2X01)
static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
-#elif defined(CONFIG_ARCH_PNX010X)
-#include <mach/gpio.h>
-#define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */
-#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
-static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0};
-static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
#elif defined(CONFIG_MACH_MX31ADS)
#include <mach/board-mx31ads.h>
static unsigned int netcard_portlist[] __used __initdata = {
@@ -372,18 +366,6 @@ writeword(unsigned long base_addr, int portno, u16 value)
{
__raw_writel(value, base_addr + (portno << 1));
}
-#elif defined(CONFIG_ARCH_PNX010X)
-static u16
-readword(unsigned long base_addr, int portno)
-{
- return inw(base_addr + (portno << 1));
-}
-
-static void
-writeword(unsigned long base_addr, int portno, u16 value)
-{
- outw(value, base_addr + (portno << 1));
-}
#else
static u16
readword(unsigned long base_addr, int portno)
@@ -546,30 +528,6 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
#endif
}
-#ifdef CONFIG_ARCH_PNX010X
- initialize_ebi();
-
- /* Map GPIO registers for the pins connected to the CS8900a. */
- if (map_cirrus_gpio() < 0)
- return -ENODEV;
-
- reset_cirrus();
-
- /* Map event-router registers. */
- if (map_event_router() < 0)
- return -ENODEV;
-
- enable_cirrus_irq();
-
- unmap_cirrus_gpio();
- unmap_event_router();
-
- dev->base_addr = ioaddr;
-
- for (i = 0 ; i < 3 ; i++)
- readreg(dev, 0);
-#endif
-
/* Grab the region so we can find another board if autoIRQ fails. */
/* WTF is going on here? */
if (!request_region(ioaddr & ~3, NETCARD_IO_EXTENT, DRV_NAME)) {
@@ -1391,9 +1349,6 @@ net_open(struct net_device *dev)
case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break;
default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
}
-#ifdef CONFIG_ARCH_PNX010X
- result = A_CNF_10B_T;
-#endif
if (!result) {
printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
release_dma:
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists