Message-Id: <201008031455.23255.matthias.fuchs@esd.eu>
Date:	Tue, 3 Aug 2010 14:55:23 +0200
From:	Matthias Fuchs <matthias.fuchs@....eu>
To:	netdev@...r.kernel.org
Cc:	Socketcan-core@...ts.berlios.de, linux-usb@...r.kernel.org
Subject: [PATCH v5] can: Add driver for esd CAN-USB/2 device

This patch adds a driver for esd's USB high speed
CAN interface. The driver supports devices with
multiple CAN interfaces.

Signed-off-by: Matthias Fuchs <matthias.fuchs@....eu>
Acked-by: Wolfgang Grandegger <wg@...ndegger.com>
---
version 5:
 - remove CONFIG_SYSFS

version 4:
 - use WARN_ON instead of BUG_ON
 - add more error handling (handle esd_us2_send_msg() return code)
 - use single point of return from functions where appropriate
 - eliminate race condition during stopping/restarting queue

version 3:
 - remove bus-error reporting feature because
   it cannot be controlled by user on demand
   with current device's firmware
 - rebased against current net-next-2.6 tree

version 2:
 - use bus-error reporting and counters
 - minor cleanup
 - rebased against current net-next-2.6 tree
 - initial post to linux-usb list for review

 drivers/net/can/usb/Kconfig    |    6 +
 drivers/net/can/usb/Makefile   |    1 +
 drivers/net/can/usb/esd_usb2.c | 1132 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1139 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/can/usb/esd_usb2.c

diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
index 97ff6fe..0452549 100644
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -7,4 +7,10 @@ config CAN_EMS_USB
 	  This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
 	  from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
 
+config CAN_ESD_USB2
+        tristate "ESD USB/2 CAN/USB interface"
+        ---help---
+          This driver supports the CAN-USB/2 interface
+          from esd electronic system design gmbh (http://www.esd.eu).
+
 endmenu
diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile
index 0afd51d..fce3cf1 100644
--- a/drivers/net/can/usb/Makefile
+++ b/drivers/net/can/usb/Makefile
@@ -3,5 +3,6 @@
 #
 
 obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
+obj-$(CONFIG_CAN_ESD_USB2) += esd_usb2.o
 
 ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c
new file mode 100644
index 0000000..05a5275
--- /dev/null
+++ b/drivers/net/can/usb/esd_usb2.c
@@ -0,0 +1,1132 @@
+/*
+ * CAN driver for esd CAN-USB/2
+ *
+ * Copyright (C) 2010 Matthias Fuchs <matthias.fuchs@....eu>, esd gmbh
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/usb.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+MODULE_AUTHOR("Matthias Fuchs <matthias.fuchs@....eu>");
+MODULE_DESCRIPTION("CAN driver for esd CAN-USB/2 interfaces");
+MODULE_LICENSE("GPL v2");
+
+/* Define these values to match your devices */
+#define USB_ESDGMBH_VENDOR_ID	0x0ab4
+#define USB_CANUSB2_PRODUCT_ID	0x0010
+
+#define ESD_USB2_CAN_CLOCK	60000000
+#define ESD_USB2_MAX_NETS	2
+
+/* USB2 commands */
+#define CMD_VERSION		1 /* also used for VERSION_REPLY */
+#define CMD_CAN_RX		2 /* device to host only */
+#define CMD_CAN_TX		3 /* also used for TX_DONE */
+#define CMD_SETBAUD		4 /* also used for SETBAUD_REPLY */
+#define CMD_TS			5 /* also used for TS_REPLY */
+#define CMD_IDADD		6 /* also used for IDADD_REPLY */
+
+/* esd CAN message flags - dlc field */
+#define ESD_RTR			0x10
+
+/* esd CAN message flags - id field */
+#define ESD_EXTID		0x20000000
+#define ESD_EVENT		0x40000000
+#define ESD_IDMASK		0x1fffffff
+
+/* esd CAN event ids used by this driver */
+#define ESD_EV_CAN_ERROR_EXT	2
+
+/* baudrate message flags */
+#define ESD_USB2_UBR		0x80000000
+#define ESD_USB2_LOM		0x40000000
+#define ESD_USB2_NO_BAUDRATE	0x7fffffff
+#define ESD_USB2_TSEG1_MIN	1
+#define ESD_USB2_TSEG1_MAX	16
+#define ESD_USB2_TSEG1_SHIFT	16
+#define ESD_USB2_TSEG2_MIN	1
+#define ESD_USB2_TSEG2_MAX	8
+#define ESD_USB2_TSEG2_SHIFT	20
+#define ESD_USB2_SJW_MAX	4
+#define ESD_USB2_SJW_SHIFT	14
+#define ESD_USB2_BRP_MIN	1
+#define ESD_USB2_BRP_MAX	1024
+#define ESD_USB2_BRP_INC	1
+#define ESD_USB2_3_SAMPLES	0x00800000
+
+/* esd IDADD message */
+#define ESD_ID_ENABLE		0x80
+#define ESD_MAX_ID_SEGMENT	64
+
+/* SJA1000 ECC register (emulated by usb2 firmware) */
+#define SJA1000_ECC_SEG		0x1F
+#define SJA1000_ECC_DIR		0x20
+#define SJA1000_ECC_ERR		0x06
+#define SJA1000_ECC_BIT		0x00
+#define SJA1000_ECC_FORM	0x40
+#define SJA1000_ECC_STUFF	0x80
+#define SJA1000_ECC_MASK	0xc0
+
+/* esd bus state event codes */
+#define ESD_BUSSTATE_MASK	0xc0
+#define ESD_BUSSTATE_WARN	0x40
+#define ESD_BUSSTATE_ERRPASSIVE	0x80
+#define ESD_BUSSTATE_BUSOFF	0xc0
+
+#define RX_BUFFER_SIZE		1024
+#define MAX_RX_URBS		4
+#define MAX_TX_URBS		16 /* must be power of 2 */
+
+struct header_msg {
+	u8 len; /* len is always the total message length in 32bit words */
+	u8 cmd;
+	u8 rsvd[2];
+};
+
+struct version_msg {
+	u8 len;
+	u8 cmd;
+	u8 rsvd;
+	u8 flags;
+	__le32 drv_version;
+};
+
+struct version_reply_msg {
+	u8 len;
+	u8 cmd;
+	u8 nets;
+	u8 features;
+	__le32 version;
+	u8 name[16];
+	__le32 rsvd;
+	__le32 ts;
+};
+
+struct rx_msg {
+	u8 len;
+	u8 cmd;
+	u8 net;
+	u8 dlc;
+	__le32 ts;
+	__le32 id; /* upper 3 bits contain flags */
+	u8 data[8];
+};
+
+struct tx_msg {
+	u8 len;
+	u8 cmd;
+	u8 net;
+	u8 dlc;
+	__le32 hnd;
+	__le32 id; /* upper 3 bits contain flags */
+	u8 data[8];
+};
+
+struct tx_done_msg {
+	u8 len;
+	u8 cmd;
+	u8 net;
+	u8 status;
+	__le32 hnd;
+	__le32 ts;
+};
+
+struct id_filter_msg {
+	u8 len;
+	u8 cmd;
+	u8 net;
+	u8 option;
+	__le32 mask[ESD_MAX_ID_SEGMENT + 1];
+};
+
+struct set_baudrate_msg {
+	u8 len;
+	u8 cmd;
+	u8 net;
+	u8 rsvd;
+	__le32 baud;
+};
+
+/* Main message type used between library and application */
+struct __attribute__ ((packed)) esd_usb2_msg {
+	union {
+		struct header_msg hdr;
+		struct version_msg version;
+		struct version_reply_msg version_reply;
+		struct rx_msg rx;
+		struct tx_msg tx;
+		struct tx_done_msg txdone;
+		struct set_baudrate_msg setbaud;
+		struct id_filter_msg filter;
+	} msg;
+};
+
+static struct usb_device_id esd_usb2_table[] = {
+	{USB_DEVICE(USB_ESDGMBH_VENDOR_ID, USB_CANUSB2_PRODUCT_ID)},
+	{}
+};
+MODULE_DEVICE_TABLE(usb, esd_usb2_table);
+
+struct esd_usb2_net_priv;
+
+struct esd_tx_urb_context {
+	struct esd_usb2_net_priv *priv;
+	u32 echo_index;
+	int dlc;
+};
+
+struct esd_usb2 {
+	struct usb_device *udev;
+	struct esd_usb2_net_priv *nets[ESD_USB2_MAX_NETS];
+
+	struct usb_anchor rx_submitted;
+
+	int net_count;
+	u32 version;
+	int rxinitdone;
+};
+
+struct esd_usb2_net_priv {
+	struct can_priv can; /* must be the first member */
+
+	atomic_t active_tx_jobs;
+	struct usb_anchor tx_submitted;
+	struct esd_tx_urb_context tx_contexts[MAX_TX_URBS];
+
+	int open_time;
+	struct esd_usb2 *usb2;
+	struct net_device *netdev;
+	int index;
+	u8 old_state;
+	struct can_berr_counter bec;
+};
+
+static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv,
+			      struct esd_usb2_msg *msg)
+{
+	struct net_device_stats *stats = &priv->netdev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	u32 id = le32_to_cpu(msg->msg.rx.id) & ESD_IDMASK;
+
+	if (id == ESD_EV_CAN_ERROR_EXT) {
+		u8 state = msg->msg.rx.data[0];
+		u8 ecc = msg->msg.rx.data[1];
+		u8 txerr = msg->msg.rx.data[2];
+		u8 rxerr = msg->msg.rx.data[3];
+
+		skb = alloc_can_err_skb(priv->netdev, &cf);
+		if (skb == NULL) {
+			stats->rx_dropped++;
+			return;
+		}
+
+		if (state != priv->old_state) {
+			priv->old_state = state;
+
+			switch (state & ESD_BUSSTATE_MASK) {
+			case ESD_BUSSTATE_BUSOFF:
+				priv->can.state = CAN_STATE_BUS_OFF;
+				cf->can_id |= CAN_ERR_BUSOFF;
+				can_bus_off(priv->netdev);
+				break;
+			case ESD_BUSSTATE_WARN:
+				priv->can.state = CAN_STATE_ERROR_WARNING;
+				priv->can.can_stats.error_warning++;
+				break;
+			case ESD_BUSSTATE_ERRPASSIVE:
+				priv->can.state = CAN_STATE_ERROR_PASSIVE;
+				priv->can.can_stats.error_passive++;
+				break;
+			default:
+				priv->can.state = CAN_STATE_ERROR_ACTIVE;
+				break;
+			}
+		} else {
+			priv->can.can_stats.bus_error++;
+			stats->rx_errors++;
+
+			cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+
+			switch (ecc & SJA1000_ECC_MASK) {
+			case SJA1000_ECC_BIT:
+				cf->data[2] |= CAN_ERR_PROT_BIT;
+				break;
+			case SJA1000_ECC_FORM:
+				cf->data[2] |= CAN_ERR_PROT_FORM;
+				break;
+			case SJA1000_ECC_STUFF:
+				cf->data[2] |= CAN_ERR_PROT_STUFF;
+				break;
+			default:
+				cf->data[2] |= CAN_ERR_PROT_UNSPEC;
+				cf->data[3] = ecc & SJA1000_ECC_SEG;
+				break;
+			}
+
+			/* Error occured during transmission? */
+			if (!(ecc & SJA1000_ECC_DIR))
+				cf->data[2] |= CAN_ERR_PROT_TX;
+
+			if (priv->can.state == CAN_STATE_ERROR_WARNING ||
+			    priv->can.state == CAN_STATE_ERROR_PASSIVE) {
+				cf->data[1] = (txerr > rxerr) ?
+					CAN_ERR_CRTL_TX_PASSIVE :
+					CAN_ERR_CRTL_RX_PASSIVE;
+			}
+			cf->data[6] = txerr;
+			cf->data[7] = rxerr;
+		}
+
+		netif_rx(skb);
+
+		priv->bec.txerr = txerr;
+		priv->bec.rxerr = rxerr;
+
+		stats->rx_packets++;
+		stats->rx_bytes += cf->can_dlc;
+	}
+}
+
+static void esd_usb2_rx_can_msg(struct esd_usb2_net_priv *priv,
+				struct esd_usb2_msg *msg)
+{
+	struct net_device_stats *stats = &priv->netdev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	int i;
+	u32 id;
+
+	if (!netif_device_present(priv->netdev))
+		return;
+
+	id = le32_to_cpu(msg->msg.rx.id);
+
+	if (id & ESD_EVENT) {
+		esd_usb2_rx_event(priv, msg);
+	} else {
+		skb = alloc_can_skb(priv->netdev, &cf);
+		if (skb == NULL) {
+			stats->rx_dropped++;
+			return;
+		}
+
+		cf->can_id = id & ESD_IDMASK;
+		cf->can_dlc = get_can_dlc(msg->msg.rx.dlc);
+
+		if (id & ESD_EXTID)
+			cf->can_id |= CAN_EFF_FLAG;
+
+		if (msg->msg.rx.dlc & ESD_RTR) {
+			cf->can_id |= CAN_RTR_FLAG;
+		} else {
+			for (i = 0; i < cf->can_dlc; i++)
+				cf->data[i] = msg->msg.rx.data[i];
+		}
+
+		netif_rx(skb);
+
+		stats->rx_packets++;
+		stats->rx_bytes += cf->can_dlc;
+	}
+
+	return;
+}
+
+static void esd_usb2_tx_done_msg(struct esd_usb2_net_priv *priv,
+				 struct esd_usb2_msg *msg)
+{
+	struct net_device_stats *stats = &priv->netdev->stats;
+	struct net_device *netdev = priv->netdev;
+	struct esd_tx_urb_context *context;
+
+	if (!netif_device_present(netdev))
+		return;
+
+	context = &priv->tx_contexts[msg->msg.txdone.hnd & (MAX_TX_URBS - 1)];
+
+	if (!msg->msg.txdone.status) {
+		stats->tx_packets++;
+		stats->tx_bytes += context->dlc;
+		can_get_echo_skb(netdev, context->echo_index);
+	} else {
+		stats->tx_errors++;
+		can_free_echo_skb(netdev, context->echo_index);
+	}
+
+	/* Release context */
+	context->echo_index = MAX_TX_URBS;
+	atomic_dec(&priv->active_tx_jobs);
+
+	netif_wake_queue(netdev);
+}
+
+static void esd_usb2_read_bulk_callback(struct urb *urb)
+{
+	struct esd_usb2 *dev = urb->context;
+	int retval;
+	int pos = 0;
+	int i;
+
+	switch (urb->status) {
+	case 0: /* success */
+		break;
+
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+
+	default:
+		dev_info(dev->udev->dev.parent,
+			 "Rx URB aborted (%d)\n", urb->status);
+		goto resubmit_urb;
+	}
+
+	while (pos < urb->actual_length) {
+		struct esd_usb2_msg *msg;
+
+		msg = (struct esd_usb2_msg *)(urb->transfer_buffer + pos);
+
+		switch (msg->msg.hdr.cmd) {
+		case CMD_CAN_RX:
+			esd_usb2_rx_can_msg(dev->nets[msg->msg.rx.net], msg);
+			break;
+
+		case CMD_CAN_TX:
+			esd_usb2_tx_done_msg(dev->nets[msg->msg.txdone.net],
+					     msg);
+			break;
+		}
+
+		pos += msg->msg.hdr.len << 2;
+
+		if (pos > urb->actual_length) {
+			dev_err(dev->udev->dev.parent, "format error\n");
+			break;
+		}
+	}
+
+resubmit_urb:
+	usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
+			  urb->transfer_buffer, RX_BUFFER_SIZE,
+			  esd_usb2_read_bulk_callback, dev);
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval == -ENODEV) {
+		for (i = 0; i < dev->net_count; i++) {
+			if (dev->nets[i])
+				netif_device_detach(dev->nets[i]->netdev);
+		}
+	} else if (retval) {
+		dev_err(dev->udev->dev.parent,
+			"failed resubmitting read bulk urb: %d\n", retval);
+	}
+
+	return;
+}
+
+/*
+ * callback for bulk IN urb
+ */
+static void esd_usb2_write_bulk_callback(struct urb *urb)
+{
+	struct esd_tx_urb_context *context = urb->context;
+	struct esd_usb2_net_priv *priv;
+	struct esd_usb2 *dev;
+	struct net_device *netdev;
+	size_t size = sizeof(struct esd_usb2_msg);
+
+	WARN_ON(!context);
+
+	priv = context->priv;
+	netdev = priv->netdev;
+	dev = priv->usb2;
+
+	/* free up our allocated buffer */
+	usb_free_coherent(urb->dev, size,
+			  urb->transfer_buffer, urb->transfer_dma);
+
+	if (!netif_device_present(netdev))
+		return;
+
+	if (urb->status)
+		dev_info(netdev->dev.parent, "Tx URB aborted (%d)\n",
+			 urb->status);
+
+	netdev->trans_start = jiffies;
+}
+
+static ssize_t show_firmware(struct device *d,
+			     struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(d);
+	struct esd_usb2 *dev = usb_get_intfdata(intf);
+
+	return sprintf(buf, "%d.%d.%d\n",
+		       (dev->version >> 12) & 0xf,
+		       (dev->version >> 8) & 0xf,
+		       dev->version & 0xff);
+}
+static DEVICE_ATTR(firmware, S_IRUGO, show_firmware, NULL);
+
+static ssize_t show_hardware(struct device *d,
+			     struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(d);
+	struct esd_usb2 *dev = usb_get_intfdata(intf);
+
+	return sprintf(buf, "%d.%d.%d\n",
+		       (dev->version >> 28) & 0xf,
+		       (dev->version >> 24) & 0xf,
+		       (dev->version >> 16) & 0xff);
+}
+static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
+
+static ssize_t show_nets(struct device *d,
+			 struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(d);
+	struct esd_usb2 *dev = usb_get_intfdata(intf);
+
+	return sprintf(buf, "%d", dev->net_count);
+}
+static DEVICE_ATTR(nets, S_IRUGO, show_nets, NULL);
+
+static int esd_usb2_send_msg(struct esd_usb2 *dev, struct esd_usb2_msg *msg)
+{
+	int actual_length;
+
+	return usb_bulk_msg(dev->udev,
+			    usb_sndbulkpipe(dev->udev, 2),
+			    msg,
+			    msg->msg.hdr.len << 2,
+			    &actual_length,
+			    1000);
+}
+
+static int esd_usb2_wait_msg(struct esd_usb2 *dev,
+			     struct esd_usb2_msg *msg)
+{
+	int actual_length;
+
+	return usb_bulk_msg(dev->udev,
+			    usb_rcvbulkpipe(dev->udev, 1),
+			    msg,
+			    sizeof(*msg),
+			    &actual_length,
+			    1000);
+}
+
+static int esd_usb2_setup_rx_urbs(struct esd_usb2 *dev)
+{
+	int i, err = 0;
+
+	if (dev->rxinitdone)
+		return 0;
+
+	for (i = 0; i < MAX_RX_URBS; i++) {
+		struct urb *urb = NULL;
+		u8 *buf = NULL;
+
+		/* create a URB, and a buffer for it */
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			dev_warn(dev->udev->dev.parent,
+				 "No memory left for URBs\n");
+			err = -ENOMEM;
+			break;
+		}
+
+		buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
+					 &urb->transfer_dma);
+		if (!buf) {
+			dev_warn(dev->udev->dev.parent,
+				 "No memory left for USB buffer\n");
+			err = -ENOMEM;
+			goto freeurb;
+		}
+
+		usb_fill_bulk_urb(urb, dev->udev,
+				  usb_rcvbulkpipe(dev->udev, 1),
+				  buf, RX_BUFFER_SIZE,
+				  esd_usb2_read_bulk_callback, dev);
+		urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+		usb_anchor_urb(urb, &dev->rx_submitted);
+
+		err = usb_submit_urb(urb, GFP_KERNEL);
+		if (err) {
+			usb_unanchor_urb(urb);
+			usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf,
+					  urb->transfer_dma);
+		}
+
+freeurb:
+		/* Drop reference, USB core will take care of freeing it */
+		usb_free_urb(urb);
+		if (err)
+			break;
+	}
+
+	/* Did we submit any URBs */
+	if (i == 0) {
+		dev_err(dev->udev->dev.parent, "couldn't setup read URBs\n");
+		return err;
+	}
+
+	/* Warn if we've couldn't transmit all the URBs */
+	if (i < MAX_RX_URBS) {
+		dev_warn(dev->udev->dev.parent,
+			 "rx performance may be slow\n");
+	}
+
+	dev->rxinitdone = 1;
+	return 0;
+}
+
+/*
+ * Start interface
+ */
+static int esd_usb2_start(struct esd_usb2_net_priv *priv)
+{
+	struct esd_usb2 *dev = priv->usb2;
+	struct net_device *netdev = priv->netdev;
+	struct esd_usb2_msg msg;
+	int err, i;
+
+	/*
+	 * Enable all IDs
+	 * The IDADD message takes up to 64 32 bit bitmasks (2048 bits).
+	 * Each bit represents one 11 bit CAN identifier. A set bit
+	 * enables reception of the corresponding CAN identifier. A cleared
+	 * bit disabled this identifier. An additional bitmask value
+	 * following the CAN 2.0A bits is used to enable reception of
+	 * extended CAN frames. Only the LSB of this final mask is checked
+	 * for the complete 29 bit ID range. The IDADD message also allows
+	 * filter configuration for an ID subset. In this case you can add
+	 * the number of the starting bitmask (0..64) to the filter.option
+	 * field followed by only some bitmasks.
+	 */
+	msg.msg.hdr.cmd = CMD_IDADD;
+	msg.msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT;
+	msg.msg.filter.net = priv->index;
+	msg.msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */
+	for (i = 0; i < ESD_MAX_ID_SEGMENT; i++)
+		msg.msg.filter.mask[i] = cpu_to_le32(0xffffffff);
+	/* enable 29bit extended IDs */
+	msg.msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001);
+
+	err = esd_usb2_send_msg(dev, &msg);
+	if (err)
+		goto failed;
+
+	err = esd_usb2_setup_rx_urbs(dev);
+	if (err)
+		goto failed;
+
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+	return 0;
+
+failed:
+	if (err == -ENODEV)
+		netif_device_detach(netdev);
+
+	dev_err(netdev->dev.parent, "couldn't start device: %d\n", err);
+
+	return err;
+}
+
+static void unlink_all_urbs(struct esd_usb2 *dev)
+{
+	struct esd_usb2_net_priv *priv;
+	int i;
+
+	usb_kill_anchored_urbs(&dev->rx_submitted);
+	for (i = 0; i < dev->net_count; i++) {
+		priv = dev->nets[i];
+		if (priv) {
+			usb_kill_anchored_urbs(&priv->tx_submitted);
+			atomic_set(&priv->active_tx_jobs, 0);
+
+			for (i = 0; i < MAX_TX_URBS; i++)
+				priv->tx_contexts[i].echo_index = MAX_TX_URBS;
+		}
+	}
+}
+
+static int esd_usb2_open(struct net_device *netdev)
+{
+	struct esd_usb2_net_priv *priv = netdev_priv(netdev);
+	int err;
+
+	/* common open */
+	err = open_candev(netdev);
+	if (err)
+		return err;
+
+	/* finally start device */
+	err = esd_usb2_start(priv);
+	if (err) {
+		dev_warn(netdev->dev.parent,
+			 "couldn't start device: %d\n", err);
+		close_candev(netdev);
+		return err;
+	}
+
+	priv->open_time = jiffies;
+
+	netif_start_queue(netdev);
+
+	return 0;
+}
+
+static netdev_tx_t esd_usb2_start_xmit(struct sk_buff *skb,
+				      struct net_device *netdev)
+{
+	struct esd_usb2_net_priv *priv = netdev_priv(netdev);
+	struct esd_usb2 *dev = priv->usb2;
+	struct esd_tx_urb_context *context = NULL;
+	struct net_device_stats *stats = &netdev->stats;
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	struct esd_usb2_msg *msg;
+	struct urb *urb;
+	u8 *buf;
+	int i, err;
+	int ret = NETDEV_TX_OK;
+	size_t size = sizeof(struct esd_usb2_msg);
+
+	if (can_dropped_invalid_skb(netdev, skb))
+		return NETDEV_TX_OK;
+
+	/* create a URB, and a buffer for it, and copy the data to the URB */
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		dev_err(netdev->dev.parent, "No memory left for URBs\n");
+		stats->tx_dropped++;
+		dev_kfree_skb(skb);
+		goto nourbmem;
+	}
+
+	buf = usb_alloc_coherent(dev->udev, size, GFP_ATOMIC,
+				 &urb->transfer_dma);
+	if (!buf) {
+		dev_err(netdev->dev.parent, "No memory left for USB buffer\n");
+		stats->tx_dropped++;
+		dev_kfree_skb(skb);
+		goto nobufmem;
+	}
+
+	msg = (struct esd_usb2_msg *)buf;
+
+	msg->msg.hdr.len = 3; /* minimal length */
+	msg->msg.hdr.cmd = CMD_CAN_TX;
+	msg->msg.tx.net = priv->index;
+	msg->msg.tx.dlc = cf->can_dlc;
+	msg->msg.tx.id = cpu_to_le32(cf->can_id & CAN_ERR_MASK);
+
+	if (cf->can_id & CAN_RTR_FLAG)
+		msg->msg.tx.dlc |= ESD_RTR;
+
+	if (cf->can_id & CAN_EFF_FLAG)
+		msg->msg.tx.id |= cpu_to_le32(ESD_EXTID);
+
+	for (i = 0; i < cf->can_dlc; i++)
+		msg->msg.tx.data[i] = cf->data[i];
+
+	msg->msg.hdr.len += (cf->can_dlc + 3) >> 2;
+
+	for (i = 0; i < MAX_TX_URBS; i++) {
+		if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) {
+			context = &priv->tx_contexts[i];
+			break;
+		}
+	}
+
+	/*
+	 * This may never happen.
+	 */
+	if (!context) {
+		dev_warn(netdev->dev.parent, "couldn't find free context\n");
+		ret = NETDEV_TX_BUSY;
+		goto releasebuf;
+	}
+
+	context->priv = priv;
+	context->echo_index = i;
+	context->dlc = cf->can_dlc;
+
+	/* hnd must not be 0 - MSB is stripped in txdone handling */
+	msg->msg.tx.hnd = 0x80000000 | i; /* returned in TX done message */
+
+	usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), buf,
+			  msg->msg.hdr.len << 2,
+			  esd_usb2_write_bulk_callback, context);
+
+	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	usb_anchor_urb(urb, &priv->tx_submitted);
+
+	can_put_echo_skb(skb, netdev, context->echo_index);
+
+	atomic_inc(&priv->active_tx_jobs);
+
+	/* Slow down tx path */
+	if (atomic_read(&priv->active_tx_jobs) >= MAX_TX_URBS)
+		netif_stop_queue(netdev);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err) {
+		can_free_echo_skb(netdev, context->echo_index);
+
+		atomic_dec(&priv->active_tx_jobs);
+		usb_unanchor_urb(urb);
+
+		stats->tx_dropped++;
+
+		if (err == -ENODEV)
+			netif_device_detach(netdev);
+		else
+			dev_warn(netdev->dev.parent, "failed tx_urb %d\n", err);
+
+		goto releasebuf;
+	}
+
+	netdev->trans_start = jiffies;
+
+	/*
+	 * Release our reference to this URB, the USB core will eventually free
+	 * it entirely.
+	 */
+	usb_free_urb(urb);
+
+	return NETDEV_TX_OK;
+
+releasebuf:
+	usb_free_coherent(dev->udev, size, buf, urb->transfer_dma);
+
+nobufmem:
+	usb_free_urb(urb);
+
+nourbmem:
+	return ret;
+}
+
+static int esd_usb2_close(struct net_device *netdev)
+{
+	struct esd_usb2_net_priv *priv = netdev_priv(netdev);
+	struct esd_usb2_msg msg;
+	int i;
+
+	/* Disable all IDs (see esd_usb2_start()) */
+	msg.msg.hdr.cmd = CMD_IDADD;
+	msg.msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT;
+	msg.msg.filter.net = priv->index;
+	msg.msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */
+	for (i = 0; i <= ESD_MAX_ID_SEGMENT; i++)
+		msg.msg.filter.mask[i] = 0;
+	if (esd_usb2_send_msg(priv->usb2, &msg) < 0)
+		dev_err(netdev->dev.parent, "sending idadd message failed\n");
+
+	/* set CAN controller to reset mode */
+	msg.msg.hdr.len = 2;
+	msg.msg.hdr.cmd = CMD_SETBAUD;
+	msg.msg.setbaud.net = priv->index;
+	msg.msg.setbaud.rsvd = 0;
+	msg.msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE);
+	if (esd_usb2_send_msg(priv->usb2, &msg) < 0)
+		dev_err(netdev->dev.parent, "sending setbaud message failed\n");
+
+	priv->can.state = CAN_STATE_STOPPED;
+
+	netif_stop_queue(netdev);
+
+	close_candev(netdev);
+
+	priv->open_time = 0;
+
+	return 0;
+}
+
+static const struct net_device_ops esd_usb2_netdev_ops = {
+	.ndo_open = esd_usb2_open,
+	.ndo_stop = esd_usb2_close,
+	.ndo_start_xmit = esd_usb2_start_xmit,
+};
+
+static struct can_bittiming_const esd_usb2_bittiming_const = {
+	.name = "esd_usb2",
+	.tseg1_min = ESD_USB2_TSEG1_MIN,
+	.tseg1_max = ESD_USB2_TSEG1_MAX,
+	.tseg2_min = ESD_USB2_TSEG2_MIN,
+	.tseg2_max = ESD_USB2_TSEG2_MAX,
+	.sjw_max = ESD_USB2_SJW_MAX,
+	.brp_min = ESD_USB2_BRP_MIN,
+	.brp_max = ESD_USB2_BRP_MAX,
+	.brp_inc = ESD_USB2_BRP_INC,
+};
+
+static int esd_usb2_set_bittiming(struct net_device *netdev)
+{
+	struct esd_usb2_net_priv *priv = netdev_priv(netdev);
+	struct can_bittiming *bt = &priv->can.bittiming;
+	struct esd_usb2_msg msg;
+	u32 canbtr;
+
+	canbtr = ESD_USB2_UBR;
+	canbtr |= (bt->brp - 1) & (ESD_USB2_BRP_MAX - 1);
+	canbtr |= ((bt->sjw - 1) & (ESD_USB2_SJW_MAX - 1))
+		<< ESD_USB2_SJW_SHIFT;
+	canbtr |= ((bt->prop_seg + bt->phase_seg1 - 1)
+		   & (ESD_USB2_TSEG1_MAX - 1))
+		<< ESD_USB2_TSEG1_SHIFT;
+	canbtr |= ((bt->phase_seg2 - 1) & (ESD_USB2_TSEG2_MAX - 1))
+		<< ESD_USB2_TSEG2_SHIFT;
+	if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+		canbtr |= ESD_USB2_3_SAMPLES;
+
+	msg.msg.hdr.len = 2;
+	msg.msg.hdr.cmd = CMD_SETBAUD;
+	msg.msg.setbaud.net = priv->index;
+	msg.msg.setbaud.rsvd = 0;
+	msg.msg.setbaud.baud = cpu_to_le32(canbtr);
+
+	dev_info(netdev->dev.parent, "setting BTR=%#x\n", canbtr);
+
+	return esd_usb2_send_msg(priv->usb2, &msg);
+}
+
+static int esd_usb2_get_berr_counter(const struct net_device *netdev,
+				     struct can_berr_counter *bec)
+{
+	struct esd_usb2_net_priv *priv = netdev_priv(netdev);
+
+	bec->txerr = priv->bec.txerr;
+	bec->rxerr = priv->bec.rxerr;
+
+	return 0;
+}
+
+static int esd_usb2_set_mode(struct net_device *netdev, enum can_mode mode)
+{
+	struct esd_usb2_net_priv *priv = netdev_priv(netdev);
+
+	if (!priv->open_time)
+		return -EINVAL;
+
+	switch (mode) {
+	case CAN_MODE_START:
+		netif_wake_queue(netdev);
+		break;
+
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int esd_usb2_probe_one_net(struct usb_interface *intf, int index)
+{
+	struct esd_usb2 *dev = usb_get_intfdata(intf);
+	struct net_device *netdev;
+	struct esd_usb2_net_priv *priv;
+	int err = 0;
+	int i;
+
+	netdev = alloc_candev(sizeof(*priv), MAX_TX_URBS);
+	if (!netdev) {
+		dev_err(&intf->dev, "couldn't alloc candev\n");
+		err = -ENOMEM;
+		goto done;
+	}
+
+	priv = netdev_priv(netdev);
+
+	init_usb_anchor(&priv->tx_submitted);
+	atomic_set(&priv->active_tx_jobs, 0);
+
+	for (i = 0; i < MAX_TX_URBS; i++)
+		priv->tx_contexts[i].echo_index = MAX_TX_URBS;
+
+	priv->usb2 = dev;
+	priv->netdev = netdev;
+	priv->index = index;
+
+	priv->can.state = CAN_STATE_STOPPED;
+	priv->can.clock.freq = ESD_USB2_CAN_CLOCK;
+	priv->can.bittiming_const = &esd_usb2_bittiming_const;
+	priv->can.do_set_bittiming = esd_usb2_set_bittiming;
+	priv->can.do_set_mode = esd_usb2_set_mode;
+	priv->can.do_get_berr_counter = esd_usb2_get_berr_counter;
+	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
+
+	netdev->flags |= IFF_ECHO; /* we support local echo */
+
+	netdev->netdev_ops = &esd_usb2_netdev_ops;
+
+	SET_NETDEV_DEV(netdev, &intf->dev);
+
+	err = register_candev(netdev);
+	if (err) {
+		dev_err(&intf->dev,
+			"couldn't register CAN device: %d\n", err);
+		free_candev(netdev);
+		err = -ENOMEM;
+		goto done;
+	}
+
+	dev->nets[index] = priv;
+	dev_info(netdev->dev.parent, "device %s registered\n", netdev->name);
+
+done:
+	return err;
+}
+
+/*
+ * probe function for new USB2 devices
+ *
+ * check version information and number of available
+ * CAN interfaces
+ */
+static int esd_usb2_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct esd_usb2 *dev;
+	struct esd_usb2_msg msg;
+	int i, err;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev) {
+		err = -ENOMEM;
+		goto done;
+	}
+
+	dev->udev = interface_to_usbdev(intf);
+
+	init_usb_anchor(&dev->rx_submitted);
+
+	usb_set_intfdata(intf, dev);
+
+	/* query number of CAN interfaces (nets) */
+	msg.msg.hdr.cmd = CMD_VERSION;
+	msg.msg.hdr.len = 2;
+	msg.msg.version.rsvd = 0;
+	msg.msg.version.flags = 0;
+	msg.msg.version.drv_version = 0;
+
+	err = esd_usb2_send_msg(dev, &msg);
+	if (err < 0) {
+		dev_err(&intf->dev, "sending version message failed\n");
+		goto free_dev;
+	}
+
+	err = esd_usb2_wait_msg(dev, &msg);
+	if (err < 0) {
+		dev_err(&intf->dev, "no version message answer\n");
+		goto free_dev;
+	}
+
+	dev->net_count = (int)msg.msg.version_reply.nets;
+	dev->version = le32_to_cpu(msg.msg.version_reply.version);
+
+	if (device_create_file(&intf->dev, &dev_attr_firmware))
+		dev_err(&intf->dev,
+			"Couldn't create device file for firmware\n");
+
+	if (device_create_file(&intf->dev, &dev_attr_hardware))
+		dev_err(&intf->dev,
+			"Couldn't create device file for hardware\n");
+
+	if (device_create_file(&intf->dev, &dev_attr_nets))
+		dev_err(&intf->dev,
+			"Couldn't create device file for nets\n");
+
+	/* do per device probing */
+	for (i = 0; i < dev->net_count; i++)
+		esd_usb2_probe_one_net(intf, i);
+
+	return 0;
+
+free_dev:
+	kfree(dev);
+done:
+	return err;
+}
+
+/*
+ * called by the usb core when the device is removed from the system
+ */
+static void esd_usb2_disconnect(struct usb_interface *intf)
+{
+	struct esd_usb2 *dev = usb_get_intfdata(intf);
+	struct net_device *netdev;
+	int i;
+
+	device_remove_file(&intf->dev, &dev_attr_firmware);
+	device_remove_file(&intf->dev, &dev_attr_hardware);
+	device_remove_file(&intf->dev, &dev_attr_nets);
+
+	usb_set_intfdata(intf, NULL);
+
+	if (dev) {
+		for (i = 0; i < dev->net_count; i++) {
+			if (dev->nets[i]) {
+				netdev = dev->nets[i]->netdev;
+				unregister_netdev(netdev);
+				free_candev(netdev);
+			}
+		}
+		unlink_all_urbs(dev);
+	}
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver esd_usb2_driver = {
+	.name = "esd_usb2",
+	.probe = esd_usb2_probe,
+	.disconnect = esd_usb2_disconnect,
+	.id_table = esd_usb2_table,
+};
+
+static int __init esd_usb2_init(void)
+{
+	int err;
+
+	/* register this driver with the USB subsystem */
+	err = usb_register(&esd_usb2_driver);
+
+	if (err) {
+		err("usb_register failed. Error number %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+module_init(esd_usb2_init);
+
+static void __exit esd_usb2_exit(void)
+{
+	/* deregister this driver with the USB subsystem */
+	usb_deregister(&esd_usb2_driver);
+}
+module_exit(esd_usb2_exit);
-- 
1.5.6.3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists