[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20100803002622.4179.31850.stgit@localhost.localdomain>
Date: Mon, 02 Aug 2010 17:27:00 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, gospo@...hat.com, bphilips@...ell.com,
Florian Mickler <florian@...kler.org>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next-2.6 PATCH 1/3] e1000e: register pm_qos request on hardware
activation
From: Florian Mickler <florian@...kler.org>
The pm_qos_add_request call has to register the pm_qos request with the pm_qos
susbsystem before first use of the pm_qos request via
pm_qos_update_request.
As pm_qos changed to use plists there is no benefit in registering and
unregistering the pm_qos request on ifup/ifdown and thus we move the
registering into e1000_open and the unregistering in e1000_close.
This fixes the following warning:
[ 1.786060] WARNING: at kernel/pm_qos_params.c:264
pm_qos_update_request+0x28/0x54()
[ 1.786088] Hardware name: Latitude E6500
[ 1.787045] pm_qos_update_request() called for unknown object
[ 1.787966] Modules linked in:
[ 1.788940] Pid: 1, comm: swapper Not tainted 2.6.35-rc5-mmotm0719 #1
[ 1.790035] Call Trace:
[ 1.791121] [<ffffffff81037335>] warn_slowpath_common+0x80/0x98
[ 1.792205] [<ffffffff810373e1>] warn_slowpath_fmt+0x41/0x43
[ 1.793279] [<ffffffff81057c14>] pm_qos_update_request+0x28/0x54
[ 1.794347] [<ffffffff8134889e>] e1000_configure+0x421/0x459
[ 1.795393] [<ffffffff8134afbd>] e1000_open+0xbd/0x37c
[ 1.796436] [<ffffffff8105743a>] ? raw_notifier_call_chain+0xf/0x11
[ 1.797491] [<ffffffff8145f948>] __dev_open+0xae/0xe2
[ 1.798547] [<ffffffff8145f997>] dev_open+0x1b/0x49
[ 1.799612] [<ffffffff8146e36e>] netpoll_setup+0x84/0x259
[ 1.800685] [<ffffffff81b5037c>] init_netconsole+0xbc/0x21f
[ 1.801744] [<ffffffff81b5026c>] ? sir_wq_init+0x0/0x35
[ 1.802793] [<ffffffff81b502c0>] ? init_netconsole+0x0/0x21f
[ 1.803845] [<ffffffff810002ff>] do_one_initcall+0x7a/0x12f
[ 1.804885] [<ffffffff81b2ccae>] kernel_init+0x138/0x1c2
[ 1.805915] [<ffffffff81003554>] kernel_thread_helper+0x4/0x10
[ 1.806937] [<ffffffff81590e00>] ? restore_args+0x0/0x30
[ 1.807955] [<ffffffff81b2cb76>] ? kernel_init+0x0/0x1c2
[ 1.808958] [<ffffffff81003550>] ? kernel_thread_helper+0x0/0x10
[ 1.809958] ---[ end trace 84b562a00a60539e ]---
Signed-off-by: Florian Mickler <florian@...kler.org>
Tested-by: Valdis Kletnieks <valdis.kletnieks@...edu>
Tested-by: Jeff Pieper <jeffrey.e.pieper@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/e1000e/netdev.c | 23 +++++++++++------------
1 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index afd0129..464c9a2 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3218,12 +3218,6 @@ int e1000e_up(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- /* DMA latency requirement to workaround early-receive/jumbo issue */
- if (adapter->flags & FLAG_HAS_ERT)
- adapter->netdev->pm_qos_req =
- pm_qos_add_request(PM_QOS_CPU_DMA_LATENCY,
- PM_QOS_DEFAULT_VALUE);
-
/* hardware has been reset, we need to reload some things */
e1000_configure(adapter);
@@ -3287,12 +3281,6 @@ void e1000e_down(struct e1000_adapter *adapter)
e1000_clean_tx_ring(adapter);
e1000_clean_rx_ring(adapter);
- if (adapter->flags & FLAG_HAS_ERT) {
- pm_qos_remove_request(
- adapter->netdev->pm_qos_req);
- adapter->netdev->pm_qos_req = NULL;
- }
-
/*
* TODO: for power management, we could drop the link and
* pci_disable_device here.
@@ -3527,6 +3515,12 @@ static int e1000_open(struct net_device *netdev)
E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
e1000_update_mng_vlan(adapter);
+ /* DMA latency requirement to workaround early-receive/jumbo issue */
+ if (adapter->flags & FLAG_HAS_ERT)
+ adapter->netdev->pm_qos_req =
+ pm_qos_add_request(PM_QOS_CPU_DMA_LATENCY,
+ PM_QOS_DEFAULT_VALUE);
+
/*
* before we allocate an interrupt, we must be ready to handle it.
* Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
@@ -3631,6 +3625,11 @@ static int e1000_close(struct net_device *netdev)
if (adapter->flags & FLAG_HAS_AMT)
e1000_release_hw_control(adapter);
+ if (adapter->flags & FLAG_HAS_ERT) {
+ pm_qos_remove_request(adapter->netdev->pm_qos_req);
+ adapter->netdev->pm_qos_req = NULL;
+ }
+
pm_runtime_put_sync(&pdev->dev);
return 0;
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists