| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100826083421.456b0d1c@nehalam>
Date: Thu, 26 Aug 2010 08:34:21 -0700
From: Stephen Hemminger <shemminger@...tta.com>
To: Masayuki Ohtake <masa-korg@....okisemi.com>
Cc: LKML <linux-kernel@...r.kernel.org>,
ML netdev <netdev@...r.kernel.org>,
Greg Rose <gregory.v.rose@...el.com>,
Maxime Bizon <mbizon@...ebox.fr>,
Kristoffer Glembo <kristoffer@...sler.com>,
Ralf Baechle <ralf@...ux-mips.org>,
John Linn <john.linn@...inx.com>,
Randy Dunlap <randy.dunlap@...cle.com>,
"David S. Miller" <davem@...emloft.net>,
MeeGo <meego-dev@...go.com>, "Wang, Qi" <qi.wang@...el.com>,
"Wang, Yong Y" <yong.y.wang@...el.com>,
Andrew <andrew.chih.howe.khor@...el.com>,
Intel OTC <joel.clark@...el.com>,
"Foster, Margie" <margie.foster@...el.com>,
Toshiharu Okada <okada533@....okisemi.com>,
Tomoya Morinaga <morinaga526@....okisemi.com>,
Takahiro Shimizu <shimizu394@....okisemi.com>
Subject: Re: [PATCH] Gigabit Ethernet driver of Topcliff PCH
On Thu, 26 Aug 2010 18:56:55 +0900
Masayuki Ohtake <masa-korg@....okisemi.com> wrote:
> ---
> Gigabit Ethernet driver of Topcliff PCH
>
> Topcliff PCH is the platform controller hub that is going to be used in
> Intel's upcoming general embedded platform. All IO peripherals in
> Topcliff PCH are actually devices sitting on AMBA bus.
> Topcliff PCH has Gigabit Ethernet I/F. Using this I/F, it is able to
> access system devices connected to Gigabit Ethernet.
>
> Signed-off-by: Masayuki Ohtake <masa-korg@....okisemi.com>
> ---
You can initialize your function table at compile time.
> +
> +struct pch_gbe_hw;
> +/**
> + * struct pch_gbe_functions - HAL APi function pointer
> + * @get_bus_info: for pch_gbe_hal_get_bus_info
> + * @init_hw: for pch_gbe_hal_init_hw
> + * @read_phy_reg: for pch_gbe_hal_read_phy_reg
> + * @write_phy_reg: for pch_gbe_hal_write_phy_reg
> + * @reset_phy: for pch_gbe_hal_phy_hw_reset
> + * @sw_reset_phy: for pch_gbe_hal_phy_sw_reset
> + * @power_up_phy: for pch_gbe_hal_power_up_phy
> + * @power_down_phy: for pch_gbe_hal_power_down_phy
> + * @read_mac_addr: for pch_gbe_hal_read_mac_addr
> + */
> +struct pch_gbe_functions {
> + void (*get_bus_info) (struct pch_gbe_hw *);
> + s32(*init_hw) (struct pch_gbe_hw *);
> + s32(*read_phy_reg) (struct pch_gbe_hw *, u32, u16 *);
> + s32(*write_phy_reg) (struct pch_gbe_hw *, u32, u16);
> + void (*reset_phy) (struct pch_gbe_hw *);
> + void (*sw_reset_phy) (struct pch_gbe_hw *);
> + void (*power_up_phy) (struct pch_gbe_hw *hw);
> + void (*power_down_phy) (struct pch_gbe_hw *hw);
> + s32(*read_mac_addr) (struct pch_gbe_hw *);
> +};
...
> +
> +/*!
> + * @ingroup Gigabit Ether driver Layer
> + * @struct pch_gbe_hw
> + * @brief Hardware infomation
> + */
> +struct pch_gbe_hw {
> + void *back;
> +
> + struct pch_gbe_regs __iomem *reg;
> + spinlock_t miim_lock;
> +
> + struct pch_gbe_functions func;
Should be:
const struct pch_gbe_functions *func;
> + struct pch_gbe_mac_info mac;
> + struct pch_gbe_phy_info phy;
> + struct pch_gbe_bus_info bus;
> +
> + u16 vendor_id;
> + u16 device_id;
> + u16 subsystem_vendor_id;
> + u16 subsystem_device_id;
> + u8 revision_id;
> +};
...
> --- /dev/null
> +++ b/drivers/net/pch_gbe/pch_gbe_api.c
> @@ -0,0 +1,247 @@
> +/*
> + * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
> + */
> +
> +#include "pch_gbe.h"
> +#include "pch_gbe_phy.h"
> +
> +/* bus type values */
> +#define pch_gbe_bus_type_unknown 0
> +#define pch_gbe_bus_type_pci 1
> +#define pch_gbe_bus_type_pcix 2
> +#define pch_gbe_bus_type_pci_express 3
> +#define pch_gbe_bus_type_reserved 4
> +
> +/* bus speed values */
> +#define pch_gbe_bus_speed_unknown 0
> +#define pch_gbe_bus_speed_33 1
> +#define pch_gbe_bus_speed_66 2
> +#define pch_gbe_bus_speed_100 3
> +#define pch_gbe_bus_speed_120 4
> +#define pch_gbe_bus_speed_133 5
> +#define pch_gbe_bus_speed_2500 6
> +#define pch_gbe_bus_speed_reserved 7
> +
> +/* bus width values */
> +#define pch_gbe_bus_width_unknown 0
> +#define pch_gbe_bus_width_pcie_x1 1
> +#define pch_gbe_bus_width_pcie_x2 2
> +#define pch_gbe_bus_width_pcie_x4 4
> +#define pch_gbe_bus_width_32 5
> +#define pch_gbe_bus_width_64 6
> +#define pch_gbe_bus_width_reserved 7
> +
> +/**
> + * pch_gbe_plat_get_bus_info - Obtain bus information for adapter
> + * @hw: Pointer to the HW structure
> + */
> +static void pch_gbe_plat_get_bus_info(struct pch_gbe_hw *hw)
> +{
> + hw->bus.type = pch_gbe_bus_type_pci_express;
> + hw->bus.speed = pch_gbe_bus_speed_2500;
> + hw->bus.width = pch_gbe_bus_width_pcie_x1;
> +}
> +
> +/**
> + * pch_gbe_plat_init_hw - Initialize hardware
> + * @hw: Pointer to the HW structure
> + * Returns
> + * 0: Successfully
> + * Negative value: Failed-EBUSY
> + */
> +static s32 pch_gbe_plat_init_hw(struct pch_gbe_hw *hw)
> +{
> + s32 ret_val;
> +
> + ret_val = pch_gbe_phy_get_id(hw);
> + if (ret_val) {
> + printk(KERN_ERR KBUILD_MODNAME ": "
> + "pch_gbe_phy_get_id error\n");
> + return ret_val;
> + }
> + pch_gbe_phy_init_setting(hw);
> + /* Setup Mac interface option RGMII */
> +#ifdef PCH_GBE_MAC_IFOP_RGMII
> + pch_gbe_phy_set_rgmii(hw);
> +#endif
> + return ret_val;
> +}
> +
static const struct pch_gbe_functions pch_gbe_ops = {
.get_bus_info = pch_gbe_plat_get_bus_info,
.init_hw = pch_gbe_plat_init_hw,
.read_phy_reg = pch_gbe_phy_read_reg_miic,
.write_phy_reg = pch_gbe_phy_write_reg_miic,
.reset_phy = pch_gbe_phy_hw_reset,
.sw_reset_phy = pch_gbe_phy_sw_reset,
.power_up_phy = pch_gbe_phy_power_up,
.power_down_phy = pch_gbe_phy_power_down,
.read_mac_addr = pch_gbe_mac_read_mac_addr,
};
> +/**
> + * pch_gbe_plat_init_function_pointers - Init func ptrs
> + * @hw: Pointer to the HW structure
> + */
> +void pch_gbe_plat_init_function_pointers(struct pch_gbe_hw *hw)
> +{
> + struct pch_gbe_phy_info *phy = &hw->phy;
> + struct pch_gbe_functions *func = &hw->func;
const struct pch_gbe_functions *func = &hw->func;
> +
> + /* Set PHY parameter */
> + phy->reset_delay_us = PCH_GBE_PHY_RESET_DELAY_US;
func = &pch_gbe_ops;
(Don't init at run time)
> +}
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists