[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <201008312313.39171.linux@rainbow-software.org>
Date: Tue, 31 Aug 2010 23:13:36 +0200
From: Ondrej Zary <linux@...nbow-software.org>
To: cxacru@...e.lp0.eu
Cc: accessrunner-general@...ts.sourceforge.net, netdev@...r.kernel.org,
Kernel development list <linux-kernel@...r.kernel.org>
Subject: cxacru: USB ethernet port of CX82310-based ADSL routers?
Hello,
I have an ADSL router based on Conexant CX82310 chip. This chip provides both
ethernet and USB interfaces. The ethernet interface is often internally
connected to a 5-port switch (in my case too). The USB interface works as an
ethernet card in Windows (using proprietary driver). In Linux, the cxacru
driver binds to the device but does not work (no wonder - it's doing firmware
things in an attempt to bring an ADSL modem up).
I captured a log from Windows (device connect, DHCP and disconnect):
http://www.rainbow-software.org/linux_files/cx82310/cx-run-dhcp.log
The commands seem to match the enums in cxacru
driver (and go to endpoint 1):
0x84, 0x85, 0x90, 0x91, 0x92, 0x99 (unknown)
Data goes to/from endpoint 2 as ethernet frames (with something at the
beginning).
I wonder how to implement support for this device in cxacru driver. Or would
be a separate driver better?
lsusb output:
Bus 001 Device 003: ID 0572:cb01 Conexant Systems (Rockwell), Inc. GeekADSL Promax Q31 ADSL Modem
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0572 Conexant Systems (Rockwell), Inc.
idProduct 0xcb01 GeekADSL Promax Q31 ADSL Modem
bcdDevice 1.00
iManufacturer 1 -
iProduct 2 USB NET CARD
iSerial 3 00000060
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 80mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 7
bInterfaceClass 0 (Defined at Interface level)
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 4
Device Status: 0x0001
Self Powered
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists