| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1283511434-21620-5-git-send-email-linux@dominikbrodowski.net>
Date: Fri, 3 Sep 2010 12:57:04 +0200
From: Dominik Brodowski <linux@...inikbrodowski.net>
To: <linux-pcmcia@...ts.infradead.org>
Cc: Dominik Brodowski <linux@...inikbrodowski.net>,
netdev@...r.kernel.org, linux-wireless@...r.kernel.org,
linux-serial@...r.kernel.org, linux-scsi@...r.kernel.org
Subject: [PATCH 05/15] pcmcia: simplify Status, ExtStatus register access
The Status (CISREG_CCSR) and ExtStatus (CISREG_ESR) registers were
only accessed to enable audio output for some drivers and IRQ for
serial_cs.c. The former also required setting config_req_t.Attributes
to CONF_ENABLE_SPKR; the latter can be simplified to setting this
field to CONF_ENABLE_ESR.
CC: netdev@...r.kernel.org
CC: linux-wireless@...r.kernel.org
CC: linux-serial@...r.kernel.org
CC: linux-scsi@...r.kernel.org
Signed-off-by: Dominik Brodowski <linux@...inikbrodowski.net>
---
drivers/isdn/hisax/sedlbauer_cs.c | 4 +--
drivers/net/pcmcia/axnet_cs.c | 4 +--
drivers/net/pcmcia/pcnet_cs.c | 5 +--
drivers/net/pcmcia/smc91c92_cs.c | 2 -
drivers/net/pcmcia/xirc2ps_cs.c | 5 +--
drivers/net/wireless/airo_cs.c | 4 +--
drivers/net/wireless/atmel_cs.c | 4 +--
drivers/net/wireless/hostap/hostap_cs.c | 4 +--
drivers/pcmcia/cs_internal.h | 2 +-
drivers/pcmcia/pcmcia_resource.c | 28 +++++++++++++++++--------
drivers/scsi/pcmcia/nsp_cs.c | 4 +--
drivers/serial/serial_cs.c | 11 +++------
drivers/staging/comedi/drivers/ni_daq_700.c | 4 +--
drivers/staging/comedi/drivers/ni_daq_dio24.c | 4 +--
drivers/staging/comedi/drivers/ni_labpc_cs.c | 4 +--
include/pcmcia/cs.h | 2 +-
16 files changed, 38 insertions(+), 53 deletions(-)
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index ad07d61..40001ad 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -175,10 +175,8 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
return -ENODEV;
/* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO)
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
- p_dev->conf.Status = CCSR_AUDIO_ENA;
- }
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 5f05ffb..8734ed8 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -334,10 +334,8 @@ static int axnet_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- if (resource_size(link->resource[1]) == 8) {
+ if (resource_size(link->resource[1]) == 8)
link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 15e80ea..1dd0dfa 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -553,10 +553,9 @@ static int pcnet_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- if (resource_size(link->resource[1]) == 8) {
+ if (resource_size(link->resource[1]) == 8)
link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
+
if ((link->manf_id == MANFID_IBM) &&
(link->card_id == PRODID_IBM_HOME_AND_AWAY))
link->conf.ConfigIndex |= 0x10;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 395e586..2031a27 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -446,7 +446,6 @@ static int mhz_mfc_config(struct pcmcia_device *link)
int i;
link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[1]->end = 8;
@@ -640,7 +639,6 @@ static int osi_config(struct pcmcia_device *link)
int i, j;
link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
link->resource[0]->end = 64;
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[1]->end = 8;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 4308bda..59398a6 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -812,10 +812,9 @@ xirc2ps_config(struct pcmcia_device * link)
if (local->modem) {
int pass;
- if (do_sound) {
+ if (do_sound)
link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status |= CCSR_AUDIO_ENA;
- }
+
link->resource[1]->end = 8;
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
if (local->dingo) {
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 488e7b4..ab60f10 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -158,10 +158,8 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
return -ENODEV;
/* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO)
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
- p_dev->conf.Status = CCSR_AUDIO_ENA;
- }
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 479f508..d6d585c 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -175,10 +175,8 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
return -ENODEV;
/* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO)
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
- p_dev->conf.Status = CCSR_AUDIO_ENA;
- }
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 3f35dd4..3fa285b 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -484,10 +484,8 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
"(default 0x%02X)\n", cfg->index, dflt->index);
/* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO)
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
- p_dev->conf.Status = CCSR_AUDIO_ENA;
- }
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index 9487340..7ef464d 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -36,7 +36,7 @@ typedef struct config_t {
unsigned int Attributes;
unsigned int IntType;
unsigned int ConfigBase;
- unsigned char Status, Option, ExtStatus;
+ unsigned char Option;
unsigned int CardValues;
struct resource io[MAX_IO_WIN]; /* io ports */
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index e431567..e119663 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -441,6 +441,8 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
struct pcmcia_socket *s = p_dev->socket;
config_t *c;
pccard_io_map iomap;
+ unsigned char status = 0;
+ unsigned char ext_status = 0;
if (!(s->state & SOCKET_PRESENT))
return -ENODEV;
@@ -476,12 +478,21 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
s->socket.flags |= SS_ZVCARD | SS_IOCARD;
if (req->Attributes & CONF_ENABLE_DMA)
s->socket.flags |= SS_DMA_MODE;
- if (req->Attributes & CONF_ENABLE_SPKR)
+ if (req->Attributes & CONF_ENABLE_SPKR) {
s->socket.flags |= SS_SPKR_ENA;
+ status = CCSR_AUDIO_ENA;
+ if (!(req->Present & PRESENT_STATUS))
+ dev_warn(&p_dev->dev, "speaker requested, but "
+ "PRESENT_STATUS not set!\n");
+ }
if (req->Attributes & CONF_ENABLE_IRQ)
s->socket.io_irq = s->pcmcia_irq;
else
s->socket.io_irq = 0;
+ if (req->Attributes & CONF_ENABLE_ESR) {
+ req->Present |= PRESENT_EXT_STATUS;
+ ext_status = ESR_REQ_ATTN_ENA;
+ }
s->ops->set_socket(s, &s->socket);
s->lock_count++;
@@ -513,14 +524,13 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &c->Option);
mdelay(40);
}
- if (req->Present & PRESENT_STATUS) {
- c->Status = req->Status;
- pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &c->Status);
- }
- if (req->Present & PRESENT_EXT_STATUS) {
- c->ExtStatus = req->ExtStatus;
- pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, &c->ExtStatus);
- }
+ if (req->Present & PRESENT_STATUS)
+ pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &status);
+
+ if (req->Present & PRESENT_EXT_STATUS)
+ pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1,
+ &ext_status);
+
if (req->Present & PRESENT_IOBASE_0) {
u8 b = c->io[0].start & 0xff;
pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_0)>>1, 1, &b);
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index e475ec5..e14fcd1 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1608,10 +1608,8 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
return -ENODEV;
/* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO)
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
- p_dev->conf.Status = CCSR_AUDIO_ENA;
- }
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index b851c1f..8035f1e 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -183,10 +183,8 @@ static void quirk_config_socket(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
- if (info->multi) {
- link->conf.Present |= PRESENT_EXT_STATUS;
- link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
- }
+ if (info->multi)
+ link->conf.Attributes |= CONF_ENABLE_ESR;
}
static const struct serial_quirk quirks[] = {
@@ -336,10 +334,9 @@ static int serial_probe(struct pcmcia_device *link)
link->priv = info;
link->conf.Attributes = CONF_ENABLE_IRQ;
- if (do_sound) {
+ if (do_sound)
link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
+
link->conf.IntType = INT_MEMORY_AND_IO;
return serial_config(link);
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index cc15666..8cf56cb 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -550,10 +550,8 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
return -ENODEV;
/* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO)
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
- p_dev->conf.Status = CCSR_AUDIO_ENA;
- }
/* Do we need to allocate an interrupt? */
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index 773ae20..ba69343 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -302,10 +302,8 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
return -ENODEV;
/* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO)
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
- p_dev->conf.Status = CCSR_AUDIO_ENA;
- }
/* Do we need to allocate an interrupt? */
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index 68c4ecb..5d5f11f 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -281,10 +281,8 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
return -ENODEV;
/* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO)
p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
- p_dev->conf.Status = CCSR_AUDIO_ENA;
- }
/* Do we need to allocate an interrupt? */
p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
index e656abe..29d693f 100644
--- a/include/pcmcia/cs.h
+++ b/include/pcmcia/cs.h
@@ -24,7 +24,6 @@ typedef struct config_req_t {
u_int Attributes;
u_int IntType;
u_int ConfigBase;
- u_char Status, ExtStatus;
u_char ConfigIndex;
u_int Present;
} config_req_t;
@@ -34,6 +33,7 @@ typedef struct config_req_t {
#define CONF_ENABLE_DMA 0x02
#define CONF_ENABLE_SPKR 0x04
#define CONF_ENABLE_PULSE_IRQ 0x08
+#define CONF_ENABLE_ESR 0x10
#define CONF_VALID_CLIENT 0x100
/* IntType field */
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists