| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1283891142-15522-6-git-send-email-cyril@ti.com>
Date: Tue, 7 Sep 2010 16:25:37 -0400
From: Cyril Chemparathy <cyril@...com>
To: netdev@...r.kernel.org,
davinci-linux-open-source@...ux.davincidsp.com,
linux-omap@...r.kernel.org
Cc: davem@...emloft.net, khilman@...prootsystems.com, tony@...mide.com,
Cyril Chemparathy <cyril@...com>
Subject: [PATCH v3 05/10] davinci: cleanup unused davinci mdio arch code
This patch removes davinci architecture code that has now been rendered
useless by the previous patches in the MDIO separation series.
Signed-off-by: Cyril Chemparathy <cyril@...com>
---
arch/arm/mach-davinci/board-da830-evm.c | 5 -----
arch/arm/mach-davinci/board-da850-evm.c | 6 ------
arch/arm/mach-davinci/board-dm365-evm.c | 7 -------
arch/arm/mach-davinci/board-dm644x-evm.c | 7 -------
arch/arm/mach-davinci/board-dm646x-evm.c | 8 --------
arch/arm/mach-davinci/board-mityomapl138.c | 7 -------
arch/arm/mach-davinci/board-neuros-osd2.c | 7 -------
arch/arm/mach-davinci/board-sffsdr.c | 7 -------
arch/arm/mach-davinci/devices-da8xx.c | 2 --
arch/arm/mach-davinci/dm365.c | 1 -
arch/arm/mach-davinci/dm644x.c | 1 -
arch/arm/mach-davinci/dm646x.c | 1 -
arch/arm/mach-davinci/include/mach/dm365.h | 1 -
arch/arm/mach-davinci/include/mach/dm644x.h | 1 -
arch/arm/mach-davinci/include/mach/dm646x.h | 1 -
15 files changed, 0 insertions(+), 62 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index ef1ab0b..2613324 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -31,9 +31,6 @@
#include <mach/usb.h>
#include <mach/aemif.h>
-#define DA830_EVM_PHY_MASK 0x0
-#define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
-
/*
* USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
*/
@@ -558,8 +555,6 @@ static __init void da830_evm_init(void)
da830_evm_usb_init();
- soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
soc_info->emac_pdata->rmii_en = 1;
ret = davinci_cfg_reg_list(da830_cpgmac_pins);
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index ac2297c..9d4dfcb 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -38,9 +38,6 @@
#include <mach/mux.h>
#include <mach/aemif.h>
-#define DA850_EVM_PHY_MASK 0x1
-#define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
-
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
@@ -678,9 +675,6 @@ static int __init da850_evm_config_emac(void)
/* Enable/Disable MII MDIO clock */
gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
- soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
-
ret = da8xx_register_emac();
if (ret)
pr_warning("da850_evm_init: emac registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 60c59dd..f697914 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -54,9 +54,6 @@ static inline int have_tvp7002(void)
return 0;
}
-#define DM365_EVM_PHY_MASK (0x2)
-#define DM365_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-
/*
* A MAX-II CPLD is used for various board control functions.
*/
@@ -530,16 +527,12 @@ fail:
/* externally mux MMC1/ENET/AIC33 to imager */
mux |= BIT(6) | BIT(5) | BIT(3);
} else {
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
/* we can use MMC1 ... */
dm365evm_mmc_configure();
davinci_setup_mmc(1, &dm365evm_mmc_config);
/* ... and ENET ... */
dm365evm_emac_configure();
- soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
resets &= ~BIT(3);
/* ... and AIC33 */
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 65bb940..c86bf23 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -39,9 +39,6 @@
#include <mach/usb.h>
#include <mach/aemif.h>
-#define DM644X_EVM_PHY_MASK (0x2)
-#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-
#define LXT971_PHY_ID (0x001378e2)
#define LXT971_PHY_MASK (0xfffffff0)
@@ -672,7 +669,6 @@ static int davinci_phy_fixup(struct phy_device *phydev)
static __init void davinci_evm_init(void)
{
struct clk *aemif_clk;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
aemif_clk = clk_get(NULL, "aemif");
clk_enable(aemif_clk);
@@ -707,9 +703,6 @@ static __init void davinci_evm_init(void)
davinci_serial_init(&uart_config);
dm644x_init_asp(&dm644x_evm_snd_data);
- soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
-
/* Register the fixup for PHY on DaVinci */
phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
davinci_phy_fixup);
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 5a29955..3f34221 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -729,9 +729,6 @@ static struct davinci_uart_config uart_config __initdata = {
.enabled_uarts = (1 << 0),
};
-#define DM646X_EVM_PHY_MASK (0x2)
-#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-
/*
* The following EDMA channels/slots are not being used by drivers (for
* example: Timer, GPIO, UART events etc) on dm646x, hence they are being
@@ -767,8 +764,6 @@ static struct edma_rsv_info dm646x_edma_rsv[] = {
static __init void evm_init(void)
{
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
evm_init_i2c();
davinci_serial_init(&uart_config);
dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
@@ -783,9 +778,6 @@ static __init void evm_init(void)
if (HAS_ATA)
davinci_init_ide();
-
- soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
}
#define DM646X_EVM_REF_FREQ 27000000
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 7146916..ec5808f 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -22,9 +22,6 @@
#include <mach/nand.h>
#include <mach/mux.h>
-#define MITYOMAPL138_PHY_MASK 0x08 /* hardcoded for now */
-#define MITYOMAPL138_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-
/*
* MityDSP-L138 includes a 256 MByte large-page NAND flash
* (128K blocks).
@@ -136,10 +133,6 @@ static void __init mityomapl138_config_emac(void)
/* configure the CFGCHIP3 register for RMII or MII */
__raw_writel(val, cfg_chip3_base);
- soc_info->emac_pdata->phy_mask = MITYOMAPL138_PHY_MASK;
- pr_debug("setting phy_mask to %x\n", soc_info->emac_pdata->phy_mask);
- soc_info->emac_pdata->mdio_max_freq = MITYOMAPL138_MDIO_FREQUENCY;
-
ret = da8xx_register_emac();
if (ret)
pr_warning("emac registration failed: %d\n", ret);
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 4c30e92..4b32f0a 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -39,9 +39,6 @@
#include <mach/mmc.h>
#include <mach/usb.h>
-#define NEUROS_OSD2_PHY_MASK 0x2
-#define NEUROS_OSD2_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
-
#define LXT971_PHY_ID 0x001378e2
#define LXT971_PHY_MASK 0xfffffff0
@@ -218,7 +215,6 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
static __init void davinci_ntosd2_init(void)
{
struct clk *aemif_clk;
- struct davinci_soc_info *soc_info = &davinci_soc_info;
int status;
aemif_clk = clk_get(NULL, "aemif");
@@ -252,9 +248,6 @@ static __init void davinci_ntosd2_init(void)
davinci_serial_init(&uart_config);
dm644x_init_asp(&dm644x_ntosd2_snd_data);
- soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY;
-
davinci_setup_usb(1000, 8);
/*
* Mux the pins to be GPIOs, VLYNQEN is already done at startup.
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 23e664a..b372d7f 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -42,9 +42,6 @@
#include <mach/mux.h>
#include <mach/usb.h>
-#define SFFSDR_PHY_MASK (0x2)
-#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-
static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
/* U-Boot Environment: Block 0
* UBL: Block 1
@@ -137,14 +134,10 @@ static void __init davinci_sffsdr_map_io(void)
static __init void davinci_sffsdr_init(void)
{
- struct davinci_soc_info *soc_info = &davinci_soc_info;
-
platform_add_devices(davinci_sffsdr_devices,
ARRAY_SIZE(davinci_sffsdr_devices));
sffsdr_init_i2c();
davinci_serial_init(&uart_config);
- soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
davinci_setup_usb(0, 0); /* We support only peripheral mode. */
/* mux VLYNQ pins */
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 9039221..9eec630 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -42,7 +42,6 @@
#define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000
#define DA8XX_EMAC_MOD_REG_OFFSET 0x2000
#define DA8XX_EMAC_RAM_OFFSET 0x0000
-#define DA8XX_MDIO_REG_OFFSET 0x4000
#define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K
void __iomem *da8xx_syscfg0_base;
@@ -381,7 +380,6 @@ struct emac_platform_data da8xx_emac_pdata = {
.ctrl_reg_offset = DA8XX_EMAC_CTRL_REG_OFFSET,
.ctrl_mod_reg_offset = DA8XX_EMAC_MOD_REG_OFFSET,
.ctrl_ram_offset = DA8XX_EMAC_RAM_OFFSET,
- .mdio_reg_offset = DA8XX_MDIO_REG_OFFSET,
.ctrl_ram_size = DA8XX_EMAC_CTRL_RAM_SIZE,
.version = EMAC_VERSION_2,
};
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 0add1ca..a12065e 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -691,7 +691,6 @@ static struct emac_platform_data dm365_emac_pdata = {
.ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET,
.ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET,
.ctrl_ram_offset = DM365_EMAC_CNTRL_RAM_OFFSET,
- .mdio_reg_offset = DM365_EMAC_MDIO_OFFSET,
.ctrl_ram_size = DM365_EMAC_CNTRL_RAM_SIZE,
.version = EMAC_VERSION_2,
};
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 22166a5..0608dd7 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -322,7 +322,6 @@ static struct emac_platform_data dm644x_emac_pdata = {
.ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET,
.ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET,
.ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET,
- .mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET,
.ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE,
.version = EMAC_VERSION_1,
};
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 3d636b2..1e0f809 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -358,7 +358,6 @@ static struct emac_platform_data dm646x_emac_pdata = {
.ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET,
.ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET,
.ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET,
- .mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET,
.ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE,
.version = EMAC_VERSION_2,
};
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
index dbb5052..2563bf4 100644
--- a/arch/arm/mach-davinci/include/mach/dm365.h
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -25,7 +25,6 @@
#define DM365_EMAC_CNTRL_OFFSET (0x0000)
#define DM365_EMAC_CNTRL_MOD_OFFSET (0x3000)
#define DM365_EMAC_CNTRL_RAM_OFFSET (0x1000)
-#define DM365_EMAC_MDIO_OFFSET (0x4000)
#define DM365_EMAC_CNTRL_RAM_SIZE (0x2000)
/* Base of key scan register bank */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 5159117..5a1b26d 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -32,7 +32,6 @@
#define DM644X_EMAC_CNTRL_OFFSET (0x0000)
#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000)
#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000)
-#define DM644X_EMAC_MDIO_OFFSET (0x4000)
#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000)
#define DM644X_ASYNC_EMIF_CONTROL_BASE 0x01E00000
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index 1c4dca9..7a27f3f 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -23,7 +23,6 @@
#define DM646X_EMAC_CNTRL_OFFSET (0x0000)
#define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000)
#define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000)
-#define DM646X_EMAC_MDIO_OFFSET (0x4000)
#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000)
#define DM646X_ASYNC_EMIF_CONTROL_BASE 0x20008000
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists