[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1284491403.2289.5.camel@achroite.uk.solarflarecom.com>
Date: Tue, 14 Sep 2010 20:10:03 +0100
From: Ben Hutchings <bhutchings@...arflare.com>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, linux-net-drivers@...arflare.com,
Santwona Behera <santwona.behera@....com>,
Peter Waskiewicz <peter.p.waskiewicz.jr@...el.com>
Subject: [PATCHv2 net-next-2.6 1/2] ethtool: Complete kernel-doc comments
for RX flow filter and hash control
There are now several interfaces within the ethtool API for getting
and setting RX flow filtering and hashing behaviour, most of which are
poorly documented. This adds kernel-doc comments for all these
interfaces, based on the existing incomplete comments and on the
initial implementations.
Signed-off-by: Ben Hutchings <bhutchings@...arflare.com>
---
Changes since v1:
- Mention ETHTOOL_RXNTUPLE_ACTION_DROP as a specific possible action for
ethtool_rx_ntuple_flow_spec
- Don't claim that ETHTOOL_GRXNTUPLE uses struct ethtool_rx_ntuple
- Add comments for the IPv4 flow specification structures that are
currently used
Ben.
include/linux/ethtool.h | 129 +++++++++++++++++++++++++++++++++++++++++------
1 files changed, 113 insertions(+), 16 deletions(-)
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 991269e..4b3ba05 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -314,9 +314,20 @@ enum ethtool_flags {
};
/* The following structures are for supporting RX network flow
- * classification configuration. Note, all multibyte fields, e.g.,
- * ip4src, ip4dst, psrc, pdst, spi, etc. are expected to be in network
- * byte order.
+ * classification and RX n-tuple configuration. Note, all multibyte
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
+ * be in network byte order.
+ */
+
+/**
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tos: Type-of-service
+ *
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
*/
struct ethtool_tcpip4_spec {
__be32 ip4src;
@@ -326,6 +337,15 @@ struct ethtool_tcpip4_spec {
__u8 tos;
};
+/**
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @spi: Security parameters index
+ * @tos: Type-of-service
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
+ */
struct ethtool_ah_espip4_spec {
__be32 ip4src;
__be32 ip4dst;
@@ -348,6 +368,15 @@ struct ethtool_ether_spec {
#define ETH_RX_NFC_IP4 1
#define ETH_RX_NFC_IP6 2
+/**
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tos: Type-of-service
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
+ * @proto: Transport protocol number; mask must be 0
+ */
struct ethtool_usrip4_spec {
__be32 ip4src;
__be32 ip4dst;
@@ -357,6 +386,15 @@ struct ethtool_usrip4_spec {
__u8 proto;
};
+/**
+ * struct ethtool_rx_flow_spec - specification for RX flow filter
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow fields to match (dependent on @flow_type)
+ * @m_u: Masks for flow field bits to be ignored
+ * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
+ * if packets should be discarded
+ * @location: Index of filter in hardware table
+ */
struct ethtool_rx_flow_spec {
__u32 flow_type;
union {
@@ -369,32 +407,87 @@ struct ethtool_rx_flow_spec {
struct ethtool_ether_spec ether_spec;
struct ethtool_usrip4_spec usr_ip4_spec;
__u8 hdata[64];
- } h_u, m_u; /* entry, mask */
+ } h_u, m_u;
__u64 ring_cookie;
__u32 location;
};
+/**
+ * struct ethtool_rxnfc - command to get or set RX flow classification rules
+ * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
+ * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
+ * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
+ * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
+ * @data: Command-dependent value
+ * @fs: Flow filter specification
+ * @rule_cnt: Number of rules to be affected
+ * @rule_locs: Array of valid rule indices
+ *
+ * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
+ * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following
+ * structure fields must not be used.
+ *
+ * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
+ * on return.
+ *
+ * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
+ * rules on return.
+ *
+ * For %ETHTOOL_GRXCLSRULE, @fs.@...ation specifies the index of an
+ * existing filter rule on entry and @fs contains the rule on return.
+ *
+ * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
+ * user buffer for @rule_locs on entry. On return, @data is the size
+ * of the filter table and @rule_locs contains the indices of the
+ * defined rules.
+ *
+ * For %ETHTOOL_SRXCLSRLINS, @fs specifies the filter rule to add or
+ * update. @fs.@...ation specifies the index to use and must not be
+ * ignored.
+ *
+ * For %ETHTOOL_SRXCLSRLDEL, @fs.@...ation specifies the index of an
+ * existing filter rule on entry.
+ *
+ * Implementation of indexed classification rules generally requires a
+ * TCAM.
+ */
struct ethtool_rxnfc {
__u32 cmd;
__u32 flow_type;
- /* The rx flow hash value or the rule DB size */
__u64 data;
- /* The following fields are not valid and must not be used for
- * the ETHTOOL_{G,X}RXFH commands. */
struct ethtool_rx_flow_spec fs;
__u32 rule_cnt;
__u32 rule_locs[0];
};
+/**
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
+ * @size: On entry, the array size of the user buffer. On return from
+ * %ETHTOOL_GRXFHINDIR, the array size of the hardware indirection table.
+ * @ring_index: RX ring/queue index for each hash value
+ */
struct ethtool_rxfh_indir {
__u32 cmd;
- /* On entry, this is the array size of the user buffer. On
- * return from ETHTOOL_GRXFHINDIR, this is the array size of
- * the hardware indirection table. */
__u32 size;
- __u32 ring_index[0]; /* ring/queue index for each hash value */
+ __u32 ring_index[0];
};
+/**
+ * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow field values to match (dependent on @flow_type)
+ * @m_u: Masks for flow field value bits to be ignored
+ * @vlan_tag: VLAN tag to match
+ * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
+ * @data: Driver-dependent data to match
+ * @data_mask: Mask for driver-dependent data bits to be ignored
+ * @action: RX ring/queue index to deliver to (non-negative) or other action
+ * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
+ *
+ * Zero values in @h_u may be ignored, as if all the corresponding
+ * mask bits were set.
+ */
struct ethtool_rx_ntuple_flow_spec {
__u32 flow_type;
union {
@@ -407,18 +500,22 @@ struct ethtool_rx_ntuple_flow_spec {
struct ethtool_ether_spec ether_spec;
struct ethtool_usrip4_spec usr_ip4_spec;
__u8 hdata[64];
- } h_u, m_u; /* entry, mask */
+ } h_u, m_u;
__u16 vlan_tag;
__u16 vlan_tag_mask;
- __u64 data; /* user-defined flow spec data */
- __u64 data_mask; /* user-defined flow spec mask */
+ __u64 data;
+ __u64 data_mask;
- /* signed to distinguish between queue and actions (DROP) */
__s32 action;
-#define ETHTOOL_RXNTUPLE_ACTION_DROP -1
+#define ETHTOOL_RXNTUPLE_ACTION_DROP -1 /* drop packet */
};
+/**
+ * struct ethtool_rx_ntuple - command to set RX flow filter
+ * @cmd: Command number - %ETHTOOL_SRXNTUPLE
+ * @fs: Flow filter specification
+ */
struct ethtool_rx_ntuple {
__u32 cmd;
struct ethtool_rx_ntuple_flow_spec fs;
--
1.7.2.1
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists