| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1285278483.7794.28.camel@achroite.uk.solarflarecom.com>
Date: Thu, 23 Sep 2010 22:48:03 +0100
From: Ben Hutchings <bhutchings@...arflare.com>
To: Jeff Garzik <jgarzik@...ox.com>
Cc: netdev@...r.kernel.org, linux-net-drivers@...arflare.com
Subject: [PATCH ethtool 1/7] ethtool-copy.h: sync with net-next-2.6
Signed-off-by: Ben Hutchings <bhutchings@...arflare.com>
---
ethtool-copy.h | 228 ++++++++++++++++++++++++++++++++++++++-----------------
1 files changed, 157 insertions(+), 71 deletions(-)
diff --git a/ethtool-copy.h b/ethtool-copy.h
index 894f1da..1be08cf 100644
--- a/ethtool-copy.h
+++ b/ethtool-copy.h
@@ -14,6 +14,7 @@
#define _LINUX_ETHTOOL_H
#include <linux/types.h>
+#include <linux/if_ether.h>
/* This should work for both 32 and 64 bit userland. */
struct ethtool_cmd {
@@ -314,9 +315,20 @@ enum ethtool_flags {
};
/* The following structures are for supporting RX network flow
- * classification configuration. Note, all multibyte fields, e.g.,
- * ip4src, ip4dst, psrc, pdst, spi, etc. are expected to be in network
- * byte order.
+ * classification and RX n-tuple configuration. Note, all multibyte
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
+ * be in network byte order.
+ */
+
+/**
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tos: Type-of-service
+ *
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
*/
struct ethtool_tcpip4_spec {
__be32 ip4src;
@@ -326,6 +338,15 @@ struct ethtool_tcpip4_spec {
__u8 tos;
};
+/**
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @spi: Security parameters index
+ * @tos: Type-of-service
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
+ */
struct ethtool_ah_espip4_spec {
__be32 ip4src;
__be32 ip4dst;
@@ -333,21 +354,17 @@ struct ethtool_ah_espip4_spec {
__u8 tos;
};
-struct ethtool_rawip4_spec {
- __be32 ip4src;
- __be32 ip4dst;
- __u8 hdata[64];
-};
-
-struct ethtool_ether_spec {
- __be16 ether_type;
- __u8 frame_size;
- __u8 eframe[16];
-};
-
#define ETH_RX_NFC_IP4 1
-#define ETH_RX_NFC_IP6 2
+/**
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tos: Type-of-service
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
+ * @proto: Transport protocol number; mask must be 0
+ */
struct ethtool_usrip4_spec {
__be32 ip4src;
__be32 ip4dst;
@@ -357,6 +374,15 @@ struct ethtool_usrip4_spec {
__u8 proto;
};
+/**
+ * struct ethtool_rx_flow_spec - specification for RX flow filter
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow fields to match (dependent on @flow_type)
+ * @m_u: Masks for flow field bits to be ignored
+ * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
+ * if packets should be discarded
+ * @location: Index of filter in hardware table
+ */
struct ethtool_rx_flow_spec {
__u32 flow_type;
union {
@@ -365,36 +391,91 @@ struct ethtool_rx_flow_spec {
struct ethtool_tcpip4_spec sctp_ip4_spec;
struct ethtool_ah_espip4_spec ah_ip4_spec;
struct ethtool_ah_espip4_spec esp_ip4_spec;
- struct ethtool_rawip4_spec raw_ip4_spec;
- struct ethtool_ether_spec ether_spec;
struct ethtool_usrip4_spec usr_ip4_spec;
- __u8 hdata[64];
- } h_u, m_u; /* entry, mask */
+ struct ethhdr ether_spec;
+ __u8 hdata[72];
+ } h_u, m_u;
__u64 ring_cookie;
__u32 location;
};
+/**
+ * struct ethtool_rxnfc - command to get or set RX flow classification rules
+ * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
+ * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
+ * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
+ * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
+ * @data: Command-dependent value
+ * @fs: Flow filter specification
+ * @rule_cnt: Number of rules to be affected
+ * @rule_locs: Array of valid rule indices
+ *
+ * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
+ * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following
+ * structure fields must not be used.
+ *
+ * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
+ * on return.
+ *
+ * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
+ * rules on return.
+ *
+ * For %ETHTOOL_GRXCLSRULE, @fs.@...ation specifies the index of an
+ * existing filter rule on entry and @fs contains the rule on return.
+ *
+ * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
+ * user buffer for @rule_locs on entry. On return, @data is the size
+ * of the filter table and @rule_locs contains the indices of the
+ * defined rules.
+ *
+ * For %ETHTOOL_SRXCLSRLINS, @fs specifies the filter rule to add or
+ * update. @fs.@...ation specifies the index to use and must not be
+ * ignored.
+ *
+ * For %ETHTOOL_SRXCLSRLDEL, @fs.@...ation specifies the index of an
+ * existing filter rule on entry.
+ *
+ * Implementation of indexed classification rules generally requires a
+ * TCAM.
+ */
struct ethtool_rxnfc {
__u32 cmd;
__u32 flow_type;
- /* The rx flow hash value or the rule DB size */
__u64 data;
- /* The following fields are not valid and must not be used for
- * the ETHTOOL_{G,X}RXFH commands. */
struct ethtool_rx_flow_spec fs;
__u32 rule_cnt;
__u32 rule_locs[0];
};
+/**
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
+ * @size: On entry, the array size of the user buffer. On return from
+ * %ETHTOOL_GRXFHINDIR, the array size of the hardware indirection table.
+ * @ring_index: RX ring/queue index for each hash value
+ */
struct ethtool_rxfh_indir {
__u32 cmd;
- /* On entry, this is the array size of the user buffer. On
- * return from ETHTOOL_GRXFHINDIR, this is the array size of
- * the hardware indirection table. */
__u32 size;
- __u32 ring_index[0]; /* ring/queue index for each hash value */
+ __u32 ring_index[0];
};
+/**
+ * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow field values to match (dependent on @flow_type)
+ * @m_u: Masks for flow field value bits to be ignored
+ * @vlan_tag: VLAN tag to match
+ * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
+ * @data: Driver-dependent data to match
+ * @data_mask: Mask for driver-dependent data bits to be ignored
+ * @action: RX ring/queue index to deliver to (non-negative) or other action
+ * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
+ *
+ * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
+ * a field value and mask are both zero this is treated as if all mask
+ * bits are set i.e. the field is ignored.
+ */
struct ethtool_rx_ntuple_flow_spec {
__u32 flow_type;
union {
@@ -403,22 +484,26 @@ struct ethtool_rx_ntuple_flow_spec {
struct ethtool_tcpip4_spec sctp_ip4_spec;
struct ethtool_ah_espip4_spec ah_ip4_spec;
struct ethtool_ah_espip4_spec esp_ip4_spec;
- struct ethtool_rawip4_spec raw_ip4_spec;
- struct ethtool_ether_spec ether_spec;
struct ethtool_usrip4_spec usr_ip4_spec;
- __u8 hdata[64];
- } h_u, m_u; /* entry, mask */
+ struct ethhdr ether_spec;
+ __u8 hdata[72];
+ } h_u, m_u;
__u16 vlan_tag;
__u16 vlan_tag_mask;
- __u64 data; /* user-defined flow spec data */
- __u64 data_mask; /* user-defined flow spec mask */
+ __u64 data;
+ __u64 data_mask;
- /* signed to distinguish between queue and actions (DROP) */
__s32 action;
-#define ETHTOOL_RXNTUPLE_ACTION_DROP -1
+#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */
+#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */
};
+/**
+ * struct ethtool_rx_ntuple - command to set or clear RX flow filter
+ * @cmd: Command number - %ETHTOOL_SRXNTUPLE
+ * @fs: Flow filter specification
+ */
struct ethtool_rx_ntuple {
__u32 cmd;
struct ethtool_rx_ntuple_flow_spec fs;
@@ -444,29 +529,29 @@ struct ethtool_flash {
#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
-#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
-#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
+#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
#define ETHTOOL_GLINK 0x0000000a /* Get link status (ethtool_value) */
-#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
-#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
-#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
-#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
-#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
-#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
* (ethtool_value) */
#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
* (ethtool_value). */
#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
-#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
+#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
@@ -477,8 +562,8 @@ struct ethtool_flash {
#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
-#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
-#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
+#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */
#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
@@ -505,18 +590,18 @@ struct ethtool_flash {
/* Indicates what features are supported by the interface. */
#define SUPPORTED_10baseT_Half (1 << 0)
#define SUPPORTED_10baseT_Full (1 << 1)
-#define SUPPORTED_100baseT_Half (1 << 2)
-#define SUPPORTED_100baseT_Full (1 << 3)
+#define SUPPORTED_100baseT_Half (1 << 2)
+#define SUPPORTED_100baseT_Full (1 << 3)
#define SUPPORTED_1000baseT_Half (1 << 4)
#define SUPPORTED_1000baseT_Full (1 << 5)
#define SUPPORTED_Autoneg (1 << 6)
#define SUPPORTED_TP (1 << 7)
#define SUPPORTED_AUI (1 << 8)
#define SUPPORTED_MII (1 << 9)
-#define SUPPORTED_FIBRE (1 << 10)
+#define SUPPORTED_FIBRE (1 << 10)
#define SUPPORTED_BNC (1 << 11)
#define SUPPORTED_10000baseT_Full (1 << 12)
-#define SUPPORTED_Pause (1 << 13)
+#define SUPPORTED_Pause (1 << 13)
#define SUPPORTED_Asym_Pause (1 << 14)
#define SUPPORTED_2500baseX_Full (1 << 15)
#define SUPPORTED_Backplane (1 << 16)
@@ -526,8 +611,8 @@ struct ethtool_flash {
#define SUPPORTED_10000baseR_FEC (1 << 20)
/* Indicates what features are advertised by the interface. */
-#define ADVERTISED_10baseT_Half (1 << 0)
-#define ADVERTISED_10baseT_Full (1 << 1)
+#define ADVERTISED_10baseT_Half (1 << 0)
+#define ADVERTISED_10baseT_Full (1 << 1)
#define ADVERTISED_100baseT_Half (1 << 2)
#define ADVERTISED_100baseT_Full (1 << 3)
#define ADVERTISED_1000baseT_Half (1 << 4)
@@ -566,12 +651,12 @@ struct ethtool_flash {
#define DUPLEX_FULL 0x01
/* Which connector port. */
-#define PORT_TP 0x00
+#define PORT_TP 0x00
#define PORT_AUI 0x01
#define PORT_MII 0x02
#define PORT_FIBRE 0x03
#define PORT_BNC 0x04
-#define PORT_DA 0x05
+#define PORT_DA 0x05
#define PORT_NONE 0xef
#define PORT_OTHER 0xff
@@ -585,7 +670,7 @@ struct ethtool_flash {
/* Enable or disable autonegotiation. If this is set to enable,
* the forced link modes above are completely ignored.
*/
-#define AUTONEG_DISABLE 0x00
+#define AUTONEG_DISABLE 0x00
#define AUTONEG_ENABLE 0x01
/* Mode MDI or MDI-X */
@@ -602,22 +687,23 @@ struct ethtool_flash {
#define WAKE_MAGIC (1 << 5)
#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
-/* L3-L4 network traffic flow types */
-#define TCP_V4_FLOW 0x01
-#define UDP_V4_FLOW 0x02
-#define SCTP_V4_FLOW 0x03
-#define AH_ESP_V4_FLOW 0x04
-#define TCP_V6_FLOW 0x05
-#define UDP_V6_FLOW 0x06
-#define SCTP_V6_FLOW 0x07
-#define AH_ESP_V6_FLOW 0x08
-#define AH_V4_FLOW 0x09
-#define ESP_V4_FLOW 0x0a
-#define AH_V6_FLOW 0x0b
-#define ESP_V6_FLOW 0x0c
-#define IP_USER_FLOW 0x0d
-#define IPV4_FLOW 0x10
-#define IPV6_FLOW 0x11
+/* L2-L4 network traffic flow types */
+#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */
+#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */
+#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */
+#define AH_ESP_V4_FLOW 0x04 /* hash only */
+#define TCP_V6_FLOW 0x05 /* hash only */
+#define UDP_V6_FLOW 0x06 /* hash only */
+#define SCTP_V6_FLOW 0x07 /* hash only */
+#define AH_ESP_V6_FLOW 0x08 /* hash only */
+#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */
+#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */
+#define AH_V6_FLOW 0x0b /* hash only */
+#define ESP_V6_FLOW 0x0c /* hash only */
+#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */
+#define IPV4_FLOW 0x10 /* hash only */
+#define IPV6_FLOW 0x11 /* hash only */
+#define ETHER_FLOW 0x12 /* spec only (ether_spec) */
/* L3-L4 network traffic flow hash options */
#define RXH_L2DA (1 << 1)
--
1.7.2.1
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists