| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100923031700.10976.38.stgit@localhost.localdomain>
Date: Wed, 22 Sep 2010 20:17:01 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, gospo@...hat.com, bphilips@...ell.com,
Bruce Allan <bruce.w.allan@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-2.6 PATCH 6/6] e1000e: 82579 do not gate auto config of PHY by
hardware during nominal use
From: Bruce Allan <bruce.w.allan@...el.com>
For non-managed versions of 82579, set the bit that prevents the hardware
from automatically configuring the PHY after resets only when the driver
performs a reset, clear the bit after resets. This is so the hardware can
configure the PHY automatically when the part is reset in a manner that is
not controlled by the driver (e.g. in a virtual environment via PCI FLR)
otherwise the PHY will be mis-configured causing issues such as failing to
link at 1000Mbps.
For managed versions of 82579, keep the previous behavior since the
manageability firmware will handle the PHY configuration.
Signed-off-by: Bruce Allan <bruce.w.allan@...el.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/e1000e/ich8lan.c | 77 +++++++++++++++++++++++++++++++++++++-----
1 files changed, 68 insertions(+), 9 deletions(-)
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index bb346ae..57b5435 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -243,6 +243,7 @@ static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
+static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
@@ -278,7 +279,7 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
- u32 ctrl;
+ u32 ctrl, fwsm;
s32 ret_val = 0;
phy->addr = 1;
@@ -300,7 +301,8 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
* disabled, then toggle the LANPHYPC Value bit to force
* the interconnect to PCIe mode.
*/
- if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+ fwsm = er32(FWSM);
+ if (!(fwsm & E1000_ICH_FWSM_FW_VALID)) {
ctrl = er32(CTRL);
ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
@@ -309,6 +311,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
ew32(CTRL, ctrl);
msleep(50);
+
+ /*
+ * Gate automatic PHY configuration by hardware on
+ * non-managed 82579
+ */
+ if (hw->mac.type == e1000_pch2lan)
+ e1000_gate_hw_phy_config_ich8lan(hw, true);
}
/*
@@ -321,6 +330,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
if (ret_val)
goto out;
+ /* Ungate automatic PHY configuration on non-managed 82579 */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
+ msleep(10);
+ e1000_gate_hw_phy_config_ich8lan(hw, false);
+ }
+
phy->id = e1000_phy_unknown;
ret_val = e1000e_get_phy_id(hw);
if (ret_val)
@@ -567,13 +583,10 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
if (mac->type == e1000_ich8lan)
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
- /* Disable PHY configuration by hardware, config by software */
- if (mac->type == e1000_pch2lan) {
- u32 extcnf_ctrl = er32(EXTCNF_CTRL);
-
- extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
- ew32(EXTCNF_CTRL, extcnf_ctrl);
- }
+ /* Gate automatic PHY configuration by hardware on managed 82579 */
+ if ((mac->type == e1000_pch2lan) &&
+ (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+ e1000_gate_hw_phy_config_ich8lan(hw, true);
return 0;
}
@@ -1621,6 +1634,32 @@ out:
}
/**
+ * e1000_gate_hw_phy_config_ich8lan - disable PHY config via hardware
+ * @hw: pointer to the HW structure
+ * @gate: boolean set to true to gate, false to ungate
+ *
+ * Gate/ungate the automatic PHY configuration via hardware; perform
+ * the configuration via software instead.
+ **/
+static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate)
+{
+ u32 extcnf_ctrl;
+
+ if (hw->mac.type != e1000_pch2lan)
+ return;
+
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+
+ if (gate)
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+ else
+ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+ return;
+}
+
+/**
* e1000_lan_init_done_ich8lan - Check for PHY config completion
* @hw: pointer to the HW structure
*
@@ -1695,6 +1734,13 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
/* Configure the LCD with the OEM bits in NVM */
ret_val = e1000_oem_bits_config_ich8lan(hw, true);
+ /* Ungate automatic PHY configuration on non-managed 82579 */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+ msleep(10);
+ e1000_gate_hw_phy_config_ich8lan(hw, false);
+ }
+
out:
return ret_val;
}
@@ -1711,6 +1757,11 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
{
s32 ret_val = 0;
+ /* Gate automatic PHY configuration by hardware on non-managed 82579 */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+ e1000_gate_hw_phy_config_ich8lan(hw, true);
+
ret_val = e1000e_phy_hw_reset_generic(hw);
if (ret_val)
goto out;
@@ -2975,6 +3026,14 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
* external PHY is reset.
*/
ctrl |= E1000_CTRL_PHY_RST;
+
+ /*
+ * Gate automatic PHY configuration by hardware on
+ * non-managed 82579
+ */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+ e1000_gate_hw_phy_config_ich8lan(hw, true);
}
ret_val = e1000_acquire_swflag_ich8lan(hw);
e_dbg("Issuing a global reset to ich8lan\n");
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists