| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 8 Oct 2010 02:46:10 -0700
From: Amit Kumar Salecha <amit.salecha@...gic.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, ameen.rahman@...gic.com,
anirban.chakraborty@...gic.com,
Sritej Velaga <sritej.velaga@...gic.com>
Subject: [PATCH NEXT 6/7] qlcnic: change all P3 references to P3P
From: Sritej Velaga <sritej.velaga@...gic.com>
This patch just rename all P3 #define to P3P.
Signed-off-by: Sritej Velaga <sritej.velaga@...gic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@...gic.com>
---
drivers/net/qlcnic/qlcnic.h | 38 +++++++++++++++---------------
drivers/net/qlcnic/qlcnic_ethtool.c | 42 +++++++++++++++++-----------------
drivers/net/qlcnic/qlcnic_hdr.h | 24 ++++++++++----------
drivers/net/qlcnic/qlcnic_hw.c | 36 +++++++++++++++---------------
drivers/net/qlcnic/qlcnic_init.c | 4 +-
5 files changed, 72 insertions(+), 72 deletions(-)
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 4025e20..d325314 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -94,12 +94,12 @@
#define FIRST_PAGE_GROUP_START 0
#define FIRST_PAGE_GROUP_END 0x100000
-#define P3_MAX_MTU (9600)
-#define P3_MIN_MTU (68)
+#define P3P_MAX_MTU (9600)
+#define P3P_MIN_MTU (68)
#define QLCNIC_MAX_ETHERHDR 32 /* This contains some padding */
-#define QLCNIC_P3_RX_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + ETH_DATA_LEN)
-#define QLCNIC_P3_RX_JUMBO_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + P3_MAX_MTU)
+#define QLCNIC_P3P_RX_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + ETH_DATA_LEN)
+#define QLCNIC_P3P_RX_JUMBO_BUF_MAX_LEN (QLCNIC_MAX_ETHERHDR + P3P_MAX_MTU)
#define QLCNIC_CT_DEFAULT_RX_BUF_LEN 2048
#define QLCNIC_LRO_BUFFER_EXTRA 2048
@@ -307,20 +307,20 @@ struct uni_data_desc{
/* Magic number to let user know flash is programmed */
#define QLCNIC_BDINFO_MAGIC 0x12345678
-#define QLCNIC_BRDTYPE_P3_REF_QG 0x0021
-#define QLCNIC_BRDTYPE_P3_HMEZ 0x0022
-#define QLCNIC_BRDTYPE_P3_10G_CX4_LP 0x0023
-#define QLCNIC_BRDTYPE_P3_4_GB 0x0024
-#define QLCNIC_BRDTYPE_P3_IMEZ 0x0025
-#define QLCNIC_BRDTYPE_P3_10G_SFP_PLUS 0x0026
-#define QLCNIC_BRDTYPE_P3_10000_BASE_T 0x0027
-#define QLCNIC_BRDTYPE_P3_XG_LOM 0x0028
-#define QLCNIC_BRDTYPE_P3_4_GB_MM 0x0029
-#define QLCNIC_BRDTYPE_P3_10G_SFP_CT 0x002a
-#define QLCNIC_BRDTYPE_P3_10G_SFP_QT 0x002b
-#define QLCNIC_BRDTYPE_P3_10G_CX4 0x0031
-#define QLCNIC_BRDTYPE_P3_10G_XFP 0x0032
-#define QLCNIC_BRDTYPE_P3_10G_TP 0x0080
+#define QLCNIC_BRDTYPE_P3P_REF_QG 0x0021
+#define QLCNIC_BRDTYPE_P3P_HMEZ 0x0022
+#define QLCNIC_BRDTYPE_P3P_10G_CX4_LP 0x0023
+#define QLCNIC_BRDTYPE_P3P_4_GB 0x0024
+#define QLCNIC_BRDTYPE_P3P_IMEZ 0x0025
+#define QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS 0x0026
+#define QLCNIC_BRDTYPE_P3P_10000_BASE_T 0x0027
+#define QLCNIC_BRDTYPE_P3P_XG_LOM 0x0028
+#define QLCNIC_BRDTYPE_P3P_4_GB_MM 0x0029
+#define QLCNIC_BRDTYPE_P3P_10G_SFP_CT 0x002a
+#define QLCNIC_BRDTYPE_P3P_10G_SFP_QT 0x002b
+#define QLCNIC_BRDTYPE_P3P_10G_CX4 0x0031
+#define QLCNIC_BRDTYPE_P3P_10G_XFP 0x0032
+#define QLCNIC_BRDTYPE_P3P_10G_TP 0x0080
#define QLCNIC_MSIX_TABLE_OFFSET 0x44
@@ -719,7 +719,7 @@ struct qlcnic_cardrsp_tx_ctx {
/* MAC */
-#define MC_COUNT_P3 38
+#define MC_COUNT_P3P 38
#define QLCNIC_MAC_NOOP 0
#define QLCNIC_MAC_ADD 1
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index e07adb1..2568aa6 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -96,7 +96,7 @@ static const char qlcnic_gstrings_test[][ETH_GSTRING_LEN] = {
static const u32 diag_registers[] = {
CRB_CMDPEG_STATE,
CRB_RCVPEG_STATE,
- CRB_XG_STATE_P3,
+ CRB_XG_STATE_P3P,
CRB_FW_CAPABILITIES_1,
ISR_INT_STATE_REG,
QLCNIC_CRB_DRV_ACTIVE,
@@ -189,9 +189,9 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
goto skip;
}
- val = QLCRD32(adapter, P3_LINK_SPEED_REG(pcifn));
- ecmd->speed = P3_LINK_SPEED_MHZ *
- P3_LINK_SPEED_VAL(pcifn, val);
+ val = QLCRD32(adapter, P3P_LINK_SPEED_REG(pcifn));
+ ecmd->speed = P3P_LINK_SPEED_MHZ *
+ P3P_LINK_SPEED_VAL(pcifn, val);
ecmd->duplex = DUPLEX_FULL;
ecmd->autoneg = AUTONEG_DISABLE;
} else
@@ -202,42 +202,42 @@ skip:
ecmd->transceiver = XCVR_EXTERNAL;
switch (adapter->ahw.board_type) {
- case QLCNIC_BRDTYPE_P3_REF_QG:
- case QLCNIC_BRDTYPE_P3_4_GB:
- case QLCNIC_BRDTYPE_P3_4_GB_MM:
+ case QLCNIC_BRDTYPE_P3P_REF_QG:
+ case QLCNIC_BRDTYPE_P3P_4_GB:
+ case QLCNIC_BRDTYPE_P3P_4_GB_MM:
ecmd->supported |= SUPPORTED_Autoneg;
ecmd->advertising |= ADVERTISED_Autoneg;
- case QLCNIC_BRDTYPE_P3_10G_CX4:
- case QLCNIC_BRDTYPE_P3_10G_CX4_LP:
- case QLCNIC_BRDTYPE_P3_10000_BASE_T:
+ case QLCNIC_BRDTYPE_P3P_10G_CX4:
+ case QLCNIC_BRDTYPE_P3P_10G_CX4_LP:
+ case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
ecmd->supported |= SUPPORTED_TP;
ecmd->advertising |= ADVERTISED_TP;
ecmd->port = PORT_TP;
ecmd->autoneg = adapter->link_autoneg;
break;
- case QLCNIC_BRDTYPE_P3_IMEZ:
- case QLCNIC_BRDTYPE_P3_XG_LOM:
- case QLCNIC_BRDTYPE_P3_HMEZ:
+ case QLCNIC_BRDTYPE_P3P_IMEZ:
+ case QLCNIC_BRDTYPE_P3P_XG_LOM:
+ case QLCNIC_BRDTYPE_P3P_HMEZ:
ecmd->supported |= SUPPORTED_MII;
ecmd->advertising |= ADVERTISED_MII;
ecmd->port = PORT_MII;
ecmd->autoneg = AUTONEG_DISABLE;
break;
- case QLCNIC_BRDTYPE_P3_10G_SFP_PLUS:
- case QLCNIC_BRDTYPE_P3_10G_SFP_CT:
- case QLCNIC_BRDTYPE_P3_10G_SFP_QT:
+ case QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS:
+ case QLCNIC_BRDTYPE_P3P_10G_SFP_CT:
+ case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
ecmd->advertising |= ADVERTISED_TP;
ecmd->supported |= SUPPORTED_TP;
check_sfp_module = netif_running(dev) &&
adapter->has_link_events;
- case QLCNIC_BRDTYPE_P3_10G_XFP:
+ case QLCNIC_BRDTYPE_P3P_10G_XFP:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
ecmd->port = PORT_FIBRE;
ecmd->autoneg = AUTONEG_DISABLE;
break;
- case QLCNIC_BRDTYPE_P3_10G_TP:
+ case QLCNIC_BRDTYPE_P3P_10G_TP:
if (adapter->ahw.port_type == QLCNIC_XGBE) {
ecmd->autoneg = AUTONEG_DISABLE;
ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
@@ -381,9 +381,9 @@ static u32 qlcnic_test_link(struct net_device *dev)
struct qlcnic_adapter *adapter = netdev_priv(dev);
u32 val;
- val = QLCRD32(adapter, CRB_XG_STATE_P3);
- val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val);
- return (val == XG_LINK_UP_P3) ? 0 : 1;
+ val = QLCRD32(adapter, CRB_XG_STATE_P3P);
+ val = XG_LINK_STATE_P3P(adapter->ahw.pci_func, val);
+ return (val == XG_LINK_UP_P3P) ? 0 : 1;
}
static int
diff --git a/drivers/net/qlcnic/qlcnic_hdr.h b/drivers/net/qlcnic/qlcnic_hdr.h
index 716203e..4290b80 100644
--- a/drivers/net/qlcnic/qlcnic_hdr.h
+++ b/drivers/net/qlcnic/qlcnic_hdr.h
@@ -556,18 +556,18 @@ enum {
#define XG_LINK_UP 0x10
#define XG_LINK_DOWN 0x20
-#define XG_LINK_UP_P3 0x01
-#define XG_LINK_DOWN_P3 0x02
-#define XG_LINK_STATE_P3_MASK 0xf
-#define XG_LINK_STATE_P3(pcifn, val) \
- (((val) >> ((pcifn) * 4)) & XG_LINK_STATE_P3_MASK)
-
-#define P3_LINK_SPEED_MHZ 100
-#define P3_LINK_SPEED_MASK 0xff
-#define P3_LINK_SPEED_REG(pcifn) \
+#define XG_LINK_UP_P3P 0x01
+#define XG_LINK_DOWN_P3P 0x02
+#define XG_LINK_STATE_P3P_MASK 0xf
+#define XG_LINK_STATE_P3P(pcifn, val) \
+ (((val) >> ((pcifn) * 4)) & XG_LINK_STATE_P3P_MASK)
+
+#define P3P_LINK_SPEED_MHZ 100
+#define P3P_LINK_SPEED_MASK 0xff
+#define P3P_LINK_SPEED_REG(pcifn) \
(CRB_PF_LINK_SPEED_1 + (((pcifn) / 4) * 4))
-#define P3_LINK_SPEED_VAL(pcifn, reg) \
- (((reg) >> (8 * ((pcifn) & 0x3))) & P3_LINK_SPEED_MASK)
+#define P3P_LINK_SPEED_VAL(pcifn, reg) \
+ (((reg) >> (8 * ((pcifn) & 0x3))) & P3P_LINK_SPEED_MASK)
#define QLCNIC_CAM_RAM_BASE (QLCNIC_CRB_CAM + 0x02000)
#define QLCNIC_CAM_RAM(reg) (QLCNIC_CAM_RAM_BASE + (reg))
@@ -592,7 +592,7 @@ enum {
#define CRB_CMDPEG_STATE (QLCNIC_REG(0x50))
#define CRB_RCVPEG_STATE (QLCNIC_REG(0x13c))
-#define CRB_XG_STATE_P3 (QLCNIC_REG(0x98))
+#define CRB_XG_STATE_P3P (QLCNIC_REG(0x98))
#define CRB_PF_LINK_SPEED_1 (QLCNIC_REG(0xe8))
#define CRB_PF_LINK_SPEED_2 (QLCNIC_REG(0xec))
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 53e8053..7a47a2a 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -754,9 +754,9 @@ int qlcnic_change_mtu(struct net_device *netdev, int mtu)
struct qlcnic_adapter *adapter = netdev_priv(netdev);
int rc = 0;
- if (mtu < P3_MIN_MTU || mtu > P3_MAX_MTU) {
+ if (mtu < P3P_MIN_MTU || mtu > P3P_MAX_MTU) {
dev_err(&adapter->netdev->dev, "%d bytes < mtu < %d bytes"
- " not supported\n", P3_MAX_MTU, P3_MIN_MTU);
+ " not supported\n", P3P_MAX_MTU, P3P_MIN_MTU);
return -EINVAL;
}
@@ -1161,31 +1161,31 @@ int qlcnic_get_board_info(struct qlcnic_adapter *adapter)
adapter->ahw.board_type = board_type;
- if (board_type == QLCNIC_BRDTYPE_P3_4_GB_MM) {
+ if (board_type == QLCNIC_BRDTYPE_P3P_4_GB_MM) {
u32 gpio = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_PAD_GPIO_I);
if ((gpio & 0x8000) == 0)
- board_type = QLCNIC_BRDTYPE_P3_10G_TP;
+ board_type = QLCNIC_BRDTYPE_P3P_10G_TP;
}
switch (board_type) {
- case QLCNIC_BRDTYPE_P3_HMEZ:
- case QLCNIC_BRDTYPE_P3_XG_LOM:
- case QLCNIC_BRDTYPE_P3_10G_CX4:
- case QLCNIC_BRDTYPE_P3_10G_CX4_LP:
- case QLCNIC_BRDTYPE_P3_IMEZ:
- case QLCNIC_BRDTYPE_P3_10G_SFP_PLUS:
- case QLCNIC_BRDTYPE_P3_10G_SFP_CT:
- case QLCNIC_BRDTYPE_P3_10G_SFP_QT:
- case QLCNIC_BRDTYPE_P3_10G_XFP:
- case QLCNIC_BRDTYPE_P3_10000_BASE_T:
+ case QLCNIC_BRDTYPE_P3P_HMEZ:
+ case QLCNIC_BRDTYPE_P3P_XG_LOM:
+ case QLCNIC_BRDTYPE_P3P_10G_CX4:
+ case QLCNIC_BRDTYPE_P3P_10G_CX4_LP:
+ case QLCNIC_BRDTYPE_P3P_IMEZ:
+ case QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS:
+ case QLCNIC_BRDTYPE_P3P_10G_SFP_CT:
+ case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
+ case QLCNIC_BRDTYPE_P3P_10G_XFP:
+ case QLCNIC_BRDTYPE_P3P_10000_BASE_T:
adapter->ahw.port_type = QLCNIC_XGBE;
break;
- case QLCNIC_BRDTYPE_P3_REF_QG:
- case QLCNIC_BRDTYPE_P3_4_GB:
- case QLCNIC_BRDTYPE_P3_4_GB_MM:
+ case QLCNIC_BRDTYPE_P3P_REF_QG:
+ case QLCNIC_BRDTYPE_P3P_4_GB:
+ case QLCNIC_BRDTYPE_P3P_4_GB_MM:
adapter->ahw.port_type = QLCNIC_GBE;
break;
- case QLCNIC_BRDTYPE_P3_10G_TP:
+ case QLCNIC_BRDTYPE_P3P_10G_TP:
adapter->ahw.port_type = (adapter->portnum < 2) ?
QLCNIC_XGBE : QLCNIC_GBE;
break;
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
index 908a25b..0d180c6 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -259,14 +259,14 @@ int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter)
switch (ring) {
case RCV_RING_NORMAL:
rds_ring->num_desc = adapter->num_rxd;
- rds_ring->dma_size = QLCNIC_P3_RX_BUF_MAX_LEN;
+ rds_ring->dma_size = QLCNIC_P3P_RX_BUF_MAX_LEN;
rds_ring->skb_size = rds_ring->dma_size + NET_IP_ALIGN;
break;
case RCV_RING_JUMBO:
rds_ring->num_desc = adapter->num_jumbo_rxd;
rds_ring->dma_size =
- QLCNIC_P3_RX_JUMBO_BUF_MAX_LEN;
+ QLCNIC_P3P_RX_JUMBO_BUF_MAX_LEN;
if (adapter->capabilities & QLCNIC_FW_CAPABILITY_HW_LRO)
rds_ring->dma_size += QLCNIC_LRO_BUFFER_EXTRA;
--
1.6.0.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists