| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1287000177-7126-4-git-send-email-jesse@nicira.com>
Date: Wed, 13 Oct 2010 13:02:53 -0700
From: Jesse Gross <jesse@...ira.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, Michael Chan <mchan@...adcom.com>
Subject: [RFC PATCH 3/7] bnx2: Update bnx2 to use new vlan accleration.
Make the bnx2 driver use the new vlan accleration model.
Signed-off-by: Jesse Gross <jesse@...ira.com>
CC: Michael Chan <mchan@...adcom.com>
---
drivers/net/bnx2.c | 75 +++------------------------------------------------
drivers/net/bnx2.h | 4 ---
2 files changed, 5 insertions(+), 74 deletions(-)
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index ae894bc..2d306f4 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -37,9 +37,6 @@
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/if_vlan.h>
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-#define BCM_VLAN 1
-#endif
#include <net/ip.h>
#include <net/tcp.h>
#include <net/checksum.h>
@@ -3087,8 +3084,6 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
struct sw_bd *rx_buf, *next_rx_buf;
struct sk_buff *skb;
dma_addr_t dma_addr;
- u16 vtag = 0;
- int hw_vlan __maybe_unused = 0;
sw_ring_cons = RX_RING_IDX(sw_cons);
sw_ring_prod = RX_RING_IDX(sw_prod);
@@ -3168,23 +3163,8 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
goto next_rx;
if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) &&
- !(bp->rx_mode & BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG)) {
- vtag = rx_hdr->l2_fhdr_vlan_tag;
-#ifdef BCM_VLAN
- if (bp->vlgrp)
- hw_vlan = 1;
- else
-#endif
- {
- struct vlan_ethhdr *ve = (struct vlan_ethhdr *)
- __skb_push(skb, 4);
-
- memmove(ve, skb->data + 4, ETH_ALEN * 2);
- ve->h_vlan_proto = htons(ETH_P_8021Q);
- ve->h_vlan_TCI = htons(vtag);
- len += 4;
- }
- }
+ !(bp->rx_mode & BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG))
+ __vlan_hwaccel_put_tag(skb, rx_hdr->l2_fhdr_vlan_tag);
skb->protocol = eth_type_trans(skb, bp->dev);
@@ -3211,14 +3191,7 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
skb->rxhash = rx_hdr->l2_fhdr_hash;
skb_record_rx_queue(skb, bnapi - &bp->bnx2_napi[0]);
-
-#ifdef BCM_VLAN
- if (hw_vlan)
- vlan_gro_receive(&bnapi->napi, bp->vlgrp, vtag, skb);
- else
-#endif
- napi_gro_receive(&bnapi->napi, skb);
-
+ napi_gro_receive(&bnapi->napi, skb);
rx_pkt++;
next_rx:
@@ -3533,13 +3506,6 @@ bnx2_set_rx_mode(struct net_device *dev)
rx_mode = bp->rx_mode & ~(BNX2_EMAC_RX_MODE_PROMISCUOUS |
BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG);
sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN;
-#ifdef BCM_VLAN
- if (!bp->vlgrp && (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN))
- rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
-#else
- if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)
- rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
-#endif
if (dev->flags & IFF_PROMISC) {
/* Promiscuous mode. */
rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS;
@@ -6365,29 +6331,6 @@ bnx2_tx_timeout(struct net_device *dev)
schedule_work(&bp->reset_task);
}
-#ifdef BCM_VLAN
-/* Called with rtnl_lock */
-static void
-bnx2_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp)
-{
- struct bnx2 *bp = netdev_priv(dev);
-
- if (netif_running(dev))
- bnx2_netif_stop(bp, false);
-
- bp->vlgrp = vlgrp;
-
- if (!netif_running(dev))
- return;
-
- bnx2_set_rx_mode(dev);
- if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)
- bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_KEEP_VLAN_UPDATE, 0, 1);
-
- bnx2_netif_start(bp, false);
-}
-#endif
-
/* Called with netif_tx_lock.
* bnx2_tx_int() runs without netif_tx_lock unless it needs to call
* netif_wake_queue().
@@ -6428,12 +6371,11 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
vlan_tag_flags |= TX_BD_FLAGS_TCP_UDP_CKSUM;
}
-#ifdef BCM_VLAN
- if (bp->vlgrp && vlan_tx_tag_present(skb)) {
+ if (vlan_tx_tag_present(skb)) {
vlan_tag_flags |=
(TX_BD_FLAGS_VLAN_TAG | (vlan_tx_tag_get(skb) << 16));
}
-#endif
+
if ((mss = skb_shinfo(skb)->gso_size)) {
u32 tcp_opt_len;
struct iphdr *iph;
@@ -8318,9 +8260,6 @@ static const struct net_device_ops bnx2_netdev_ops = {
.ndo_set_mac_address = bnx2_change_mac_addr,
.ndo_change_mtu = bnx2_change_mtu,
.ndo_tx_timeout = bnx2_tx_timeout,
-#ifdef BCM_VLAN
- .ndo_vlan_rx_register = bnx2_vlan_rx_register,
-#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = poll_bnx2,
#endif
@@ -8328,9 +8267,7 @@ static const struct net_device_ops bnx2_netdev_ops = {
static void inline vlan_features_add(struct net_device *dev, unsigned long flags)
{
-#ifdef BCM_VLAN
dev->vlan_features |= flags;
-#endif
}
static int __devinit
@@ -8379,9 +8316,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
dev->features |= NETIF_F_IPV6_CSUM;
vlan_features_add(dev, NETIF_F_IPV6_CSUM);
}
-#ifdef BCM_VLAN
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-#endif
dev->features |= NETIF_F_TSO | NETIF_F_TSO_ECN;
vlan_features_add(dev, NETIF_F_TSO | NETIF_F_TSO_ECN);
if (CHIP_NUM(bp) == CHIP_NUM_5709) {
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index efdfbc2..4f44db6 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6742,10 +6742,6 @@ struct bnx2 {
struct bnx2_napi bnx2_napi[BNX2_MAX_MSIX_VEC];
-#ifdef BCM_VLAN
- struct vlan_group *vlgrp;
-#endif
-
u32 rx_buf_use_size; /* useable size */
u32 rx_buf_size; /* with alignment */
u32 rx_copy_thresh;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists