| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1287408674-15412-7-git-send-email-mkl@pengutronix.de>
Date: Mon, 18 Oct 2010 15:31:12 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: socketcan-core@...ts.berlios.de
Cc: netdev@...r.kernel.org, Marc Kleine-Budde <mkl@...gutronix.de>,
Christian Pellegrin <chripell@...e.org>,
Marc Zyngier <maz@...terjones.org>
Subject: [PATCH 6/8] can: mcp251x: Don't use pdata->model for chip selection anymore
Since commit e446630c960946b5c1762e4eadb618becef599e7, i.e. v2.6.35-rc1,
the mcp251x chip model can be selected via the modalias member in the
struct spi_board_info. The driver stores the actual model in the
struct mcp251x_platform_data.
>From the driver point of view the platform_data should be read only.
Since all in-tree users of the mcp251x have already been converted to
the modalias method, this patch moves the "model" member from the
struct mcp251x_platform_data to the driver's private data structure.
Signed-off-by: Marc Kleine-Budde <mkl@...gutronix.de>
Cc: Christian Pellegrin <chripell@...e.org>
Cc: Marc Zyngier <maz@...terjones.org>
---
drivers/net/can/mcp251x.c | 24 ++++++++++++------------
include/linux/can/platform/mcp251x.h | 4 ----
2 files changed, 12 insertions(+), 16 deletions(-)
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index f5e2edd..0386bed 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -38,14 +38,14 @@
* static struct mcp251x_platform_data mcp251x_info = {
* .oscillator_frequency = 8000000,
* .board_specific_setup = &mcp251x_setup,
- * .model = CAN_MCP251X_MCP2510,
* .power_enable = mcp251x_power_enable,
* .transceiver_enable = NULL,
* };
*
* static struct spi_board_info spi_board_info[] = {
* {
- * .modalias = "mcp251x",
+ * .modalias = "mcp2510",
+ * // or "mcp2515" depending on your controller
* .platform_data = &mcp251x_info,
* .irq = IRQ_EINT13,
* .max_speed_hz = 2*1000*1000,
@@ -224,10 +224,16 @@ static struct can_bittiming_const mcp251x_bittiming_const = {
.brp_inc = 1,
};
+enum mcp251x_model {
+ CAN_MCP251X_MCP2510 = 0x2510,
+ CAN_MCP251X_MCP2515 = 0x2515,
+};
+
struct mcp251x_priv {
struct can_priv can;
struct net_device *net;
struct spi_device *spi;
+ enum mcp251x_model model;
struct mutex mcp_lock; /* SPI device lock */
@@ -362,10 +368,9 @@ static void mcp251x_write_bits(struct spi_device *spi, u8 reg,
static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf,
int len, int tx_buf_idx)
{
- struct mcp251x_platform_data *pdata = spi->dev.platform_data;
struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
- if (pdata->model == CAN_MCP251X_MCP2510) {
+ if (priv->model == CAN_MCP251X_MCP2510) {
int i;
for (i = 1; i < TXBDAT_OFF + len; i++)
@@ -408,9 +413,8 @@ static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
int buf_idx)
{
struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
- struct mcp251x_platform_data *pdata = spi->dev.platform_data;
- if (pdata->model == CAN_MCP251X_MCP2510) {
+ if (priv->model == CAN_MCP251X_MCP2510) {
int i, len;
for (i = 1; i < RXBDAT_OFF; i++)
@@ -951,16 +955,12 @@ static int __devinit mcp251x_can_probe(struct spi_device *spi)
struct net_device *net;
struct mcp251x_priv *priv;
struct mcp251x_platform_data *pdata = spi->dev.platform_data;
- int model = spi_get_device_id(spi)->driver_data;
int ret = -ENODEV;
if (!pdata)
/* Platform data is required for osc freq */
goto error_out;
- if (model)
- pdata->model = model;
-
/* Allocate can/net device */
net = alloc_candev(sizeof(struct mcp251x_priv), TX_ECHO_SKB_MAX);
if (!net) {
@@ -977,6 +977,7 @@ static int __devinit mcp251x_can_probe(struct spi_device *spi)
priv->can.clock.freq = pdata->oscillator_frequency / 2;
priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES |
CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY;
+ priv->model = spi_get_device_id(spi)->driver_data;
priv->net = net;
dev_set_drvdata(&spi->dev, priv);
@@ -1150,8 +1151,7 @@ static int mcp251x_can_resume(struct spi_device *spi)
#define mcp251x_can_resume NULL
#endif
-static struct spi_device_id mcp251x_id_table[] = {
- { "mcp251x", 0 /* Use pdata.model */ },
+static const struct spi_device_id mcp251x_id_table[] = {
{ "mcp2510", CAN_MCP251X_MCP2510 },
{ "mcp2515", CAN_MCP251X_MCP2515 },
{ },
diff --git a/include/linux/can/platform/mcp251x.h b/include/linux/can/platform/mcp251x.h
index dba2826..8e20540 100644
--- a/include/linux/can/platform/mcp251x.h
+++ b/include/linux/can/platform/mcp251x.h
@@ -12,7 +12,6 @@
/**
* struct mcp251x_platform_data - MCP251X SPI CAN controller platform data
* @oscillator_frequency: - oscillator frequency in Hz
- * @model: - actual type of chip
* @board_specific_setup: - called before probing the chip (power,reset)
* @transceiver_enable: - called to power on/off the transceiver
* @power_enable: - called to power on/off the mcp *and* the
@@ -25,9 +24,6 @@
struct mcp251x_platform_data {
unsigned long oscillator_frequency;
- int model;
-#define CAN_MCP251X_MCP2510 0x2510
-#define CAN_MCP251X_MCP2515 0x2515
int (*board_specific_setup)(struct spi_device *spi);
int (*transceiver_enable)(int enable);
int (*power_enable) (int enable);
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists