| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1288237684-30783-1-git-send-email-alex@wigen.net>
Date: Thu, 28 Oct 2010 13:48:04 +1000
From: alex@...en.net
To: netdev@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, alex@...en.net
Subject: [PATCH] via-velocity: Codestyle fixes
From: Alexander Wigen <alex@...en.net>
checkpatch.pl --terse --file drivers/net/via-velocity.c
Before: total: 13 errors, 106 warnings, 3537 lines checked
After: total: 0 errors, 96 warnings, 3536 lines checked
Signed-off-by: Alexander Wigen <alex@...en.net>
---
drivers/net/via-velocity.c | 187 ++++++++++++++++++++++----------------------
1 files changed, 93 insertions(+), 94 deletions(-)
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index cab96ad..05c2e1e 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -84,7 +84,7 @@ static int velocity_nics;
static int msglevel = MSG_LEVEL_INFO;
/**
- * mac_get_cam_mask - Read a CAM mask
+ * mac_get_cam_mask - Read a CAM mask
* @regs: register block for this velocity
* @mask: buffer to store mask
*
@@ -113,7 +113,7 @@ static void mac_get_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
/**
- * mac_set_cam_mask - Set a CAM mask
+ * mac_set_cam_mask - Set a CAM mask
* @regs: register block for this velocity
* @mask: CAM mask to load
*
@@ -156,7 +156,7 @@ static void mac_set_vlan_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
}
/**
- * mac_set_cam - set CAM data
+ * mac_set_cam - set CAM data
* @regs: register block of this velocity
* @idx: Cam index
* @addr: 2 or 6 bytes of CAM data
@@ -211,11 +211,11 @@ static void mac_set_vlan_cam(struct mac_regs __iomem *regs, int idx,
/**
- * mac_wol_reset - reset WOL after exiting low power
+ * mac_wol_reset - reset WOL after exiting low power
* @regs: register block of this velocity
*
* Called after we drop out of wake on lan mode in order to
- * reset the Wake on lan features. This function doesn't restore
+ * reset the Wake On Lan features. This function doesn't restore
* the rest of the logic from the result of sleep/wakeup
*/
static void mac_wol_reset(struct mac_regs __iomem *regs)
@@ -342,7 +342,7 @@ VELOCITY_PARAM(ValPktLen, "Receiving or Drop invalid 802.3 frame");
1: Wake up if link status is on/off.
2: Wake up if recevied an arp packet.
4: Wake up if recevied any unicast packet.
- Those value can be sumed up to support more than one option.
+ Those value can be summed up to support more than one option.
*/
VELOCITY_PARAM(wol_opts, "Wake On Lan options");
@@ -370,7 +370,7 @@ static DEFINE_PCI_DEVICE_TABLE(velocity_id_table) = {
MODULE_DEVICE_TABLE(pci, velocity_id_table);
/**
- * get_chip_name - identifier to name
+ * get_chip_name - identifier to name
* @id: chip identifier
*
* Given a chip identifier return a suitable description. Returns
@@ -386,7 +386,7 @@ static const char __devinit *get_chip_name(enum chip_type chip_id)
}
/**
- * velocity_remove1 - device unplug
+ * velocity_remove1 - device unplug
* @pdev: PCI device being removed
*
* Device unload callback. Called on an unplug or on module
@@ -409,7 +409,7 @@ static void __devexit velocity_remove1(struct pci_dev *pdev)
}
/**
- * velocity_set_int_opt - parser for integer options
+ * velocity_set_int_opt - parser for integer options
* @opt: pointer to option value
* @val: value the user requested (or -1 for default)
* @min: lowest value allowed
@@ -438,7 +438,7 @@ static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max,
}
/**
- * velocity_set_bool_opt - parser for boolean options
+ * velocity_set_bool_opt - parser for boolean options
* @opt: pointer to option value
* @val: value the user requested (or -1 for default)
* @def: default value (yes/no)
@@ -467,7 +467,7 @@ static void __devinit velocity_set_bool_opt(u32 *opt, int val, int def, u32 flag
}
/**
- * velocity_get_options - set options on device
+ * velocity_get_options - set options on device
* @opts: option structure for the device
* @index: index of option to use in module options array
* @devname: device name
@@ -492,7 +492,7 @@ static void __devinit velocity_get_options(struct velocity_opt *opts, int index,
}
/**
- * velocity_init_cam_filter - initialise CAM
+ * velocity_init_cam_filter - initialize CAM
* @vptr: velocity to program
*
* Initialize the content addressable memory used for filters. Load
@@ -507,8 +507,8 @@ static void velocity_init_cam_filter(struct velocity_info *vptr)
WORD_REG_BITS_ON(MCFG_VIDFR, ®s->MCFG);
/* Disable all CAMs */
- memset(vptr->vCAMmask, 0, sizeof(u8) * 8);
- memset(vptr->mCAMmask, 0, sizeof(u8) * 8);
+ memset(vptr->vCAMmask, 0, sizeof(u8) *8);
+ memset(vptr->mCAMmask, 0, sizeof(u8) *8);
mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
mac_set_cam_mask(regs, vptr->mCAMmask);
@@ -564,7 +564,7 @@ static void velocity_init_rx_ring_indexes(struct velocity_info *vptr)
}
/**
- * velocity_rx_reset - handle a receive reset
+ * velocity_rx_reset - handle a receive reset
* @vptr: velocity we are resetting
*
* Reset the ownership and status for the receive ring side.
@@ -591,7 +591,7 @@ static void velocity_rx_reset(struct velocity_info *vptr)
}
/**
- * velocity_get_opt_media_mode - get media selection
+ * velocity_get_opt_media_mode - get media selection
* @vptr: velocity adapter
*
* Get the media mode stored in EEPROM or module options and load
@@ -627,7 +627,7 @@ static u32 velocity_get_opt_media_mode(struct velocity_info *vptr)
}
/**
- * safe_disable_mii_autopoll - autopoll off
+ * safe_disable_mii_autopoll - autopoll off
* @regs: velocity registers
*
* Turn off the autopoll and wait for it to disable on the chip
@@ -646,7 +646,7 @@ static void safe_disable_mii_autopoll(struct mac_regs __iomem *regs)
}
/**
- * enable_mii_autopoll - turn on autopolling
+ * enable_mii_autopoll - turn on autopolling
* @regs: velocity registers
*
* Enable the MII link status autopoll feature on the Velocity
@@ -676,7 +676,7 @@ static void enable_mii_autopoll(struct mac_regs __iomem *regs)
}
/**
- * velocity_mii_read - read MII data
+ * velocity_mii_read - read MII data
* @regs: velocity registers
* @index: MII register index
* @data: buffer for received data
@@ -712,7 +712,7 @@ static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data)
/**
- * mii_check_media_mode - check media state
+ * mii_check_media_mode - check media state
* @regs: velocity registers
*
* Check the current MII status and determine the link status
@@ -755,7 +755,7 @@ static u32 mii_check_media_mode(struct mac_regs __iomem *regs)
}
/**
- * velocity_mii_write - write MII data
+ * velocity_mii_write - write MII data
* @regs: velocity registers
* @index: MII register index
* @data: 16bit data for the MII register
@@ -794,7 +794,7 @@ static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 da
}
/**
- * set_mii_flow_control - flow control setup
+ * set_mii_flow_control - flow control setup
* @vptr: velocity interface
*
* Set up the flow control on this interface according to
@@ -829,10 +829,10 @@ static void set_mii_flow_control(struct velocity_info *vptr)
}
/**
- * mii_set_auto_on - autonegotiate on
+ * mii_set_auto_on - autonegotiate on
* @vptr: velocity
*
- * Enable autonegotation on this interface
+ * Enable autonegotiation on this interface
*/
static void mii_set_auto_on(struct velocity_info *vptr)
{
@@ -879,7 +879,7 @@ static u32 check_connection_type(struct mac_regs __iomem *regs)
/**
- * velocity_set_media_mode - set media mode
+ * velocity_set_media_mode - set media mode
* @mii_status: old MII link state
*
* Check the media link state and configure the flow control
@@ -999,7 +999,7 @@ static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
}
/**
- * velocity_print_link_status - link status reporting
+ * velocity_print_link_status - link status reporting
* @vptr: velocity to report on
*
* Turn the link status of the velocity card into a kernel log
@@ -1050,7 +1050,7 @@ static void velocity_print_link_status(struct velocity_info *vptr)
}
/**
- * enable_flow_control_ability - flow control
+ * enable_flow_control_ability - flow control
* @vptr: veloity to configure
*
* Set up flow control according to the flow control options
@@ -1102,7 +1102,7 @@ static void enable_flow_control_ability(struct velocity_info *vptr)
}
/**
- * velocity_soft_reset - soft reset
+ * velocity_soft_reset - soft reset
* @vptr: velocity to reset
*
* Kick off a soft reset of the velocity adapter and then poll
@@ -1131,7 +1131,7 @@ static int velocity_soft_reset(struct velocity_info *vptr)
}
/**
- * velocity_set_multi - filter list change callback
+ * velocity_set_multi - filter list change callback
* @dev: network device
*
* Called by the network layer when the filter lists need to change
@@ -1181,7 +1181,7 @@ static void velocity_set_multi(struct net_device *dev)
*/
/**
- * mii_init - set up MII
+ * mii_init - set up MII
* @vptr: velocity adapter
* @mii_status: links tatus
*
@@ -1250,7 +1250,7 @@ static void mii_init(struct velocity_info *vptr, u32 mii_status)
}
/**
- * setup_queue_timers - Setup interrupt timers
+ * setup_queue_timers - Setup interrupt timers
*
* Setup interrupt frequency during suppression (timeout if the frame
* count isn't filled).
@@ -1273,7 +1273,7 @@ static void setup_queue_timers(struct velocity_info *vptr)
}
}
/**
- * setup_adaptive_interrupts - Setup interrupt suppression
+ * setup_adaptive_interrupts - Setup interrupt suppression
*
* @vptr velocity adapter
*
@@ -1311,11 +1311,11 @@ static void setup_adaptive_interrupts(struct velocity_info *vptr)
}
/**
- * velocity_init_registers - initialise MAC registers
+ * velocity_init_registers - initialise MAC registers
* @vptr: velocity to init
* @type: type of initialisation (hot or cold)
*
- * Initialise the MAC on a reset or on first set up on the
+ * Initialize the MAC on a reset or on first set up on the
* hardware.
*/
static void velocity_init_registers(struct velocity_info *vptr,
@@ -1459,7 +1459,7 @@ static void velocity_give_many_rx_descs(struct velocity_info *vptr)
}
/**
- * velocity_init_dma_rings - set up DMA rings
+ * velocity_init_dma_rings - set up DMA rings
* @vptr: Velocity to set up
*
* Allocate PCI mapped DMA rings for the receive and transmit layer
@@ -1511,7 +1511,7 @@ static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu)
}
/**
- * velocity_alloc_rx_buf - allocate aligned receive buffer
+ * velocity_alloc_rx_buf - allocate aligned receive buffer
* @vptr: velocity
* @idx: ring index
*
@@ -1542,7 +1542,7 @@ static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
* Fill in the descriptor to match
*/
- *((u32 *) & (rd->rdesc0)) = 0;
+ *((u32 *) &(rd->rdesc0)) = 0;
rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN;
rd->pa_low = cpu_to_le32(rd_info->skb_dma);
rd->pa_high = 0;
@@ -1578,7 +1578,7 @@ static int velocity_rx_refill(struct velocity_info *vptr)
}
/**
- * velocity_free_rd_ring - free receive ring
+ * velocity_free_rd_ring - free receive ring
* @vptr: velocity to clean up
*
* Free the receive buffers for each ring slot and any
@@ -1614,7 +1614,7 @@ static void velocity_free_rd_ring(struct velocity_info *vptr)
/**
- * velocity_init_rd_ring - set up receive ring
+ * velocity_init_rd_ring - set up receive ring
* @vptr: velocity to configure
*
* Allocate and set up the receive buffers for each ring slot and
@@ -1644,7 +1644,7 @@ out:
}
/**
- * velocity_init_td_ring - set up transmit ring
+ * velocity_init_td_ring - set up transmit ring
* @vptr: velocity
*
* Set up the transmit ring and chain the ring pointers together.
@@ -1673,7 +1673,7 @@ static int velocity_init_td_ring(struct velocity_info *vptr)
}
/**
- * velocity_free_dma_rings - free PCI ring pointers
+ * velocity_free_dma_rings - free PCI ring pointers
* @vptr: Velocity to free from
*
* Clean up the PCI ring buffers allocated to this velocity.
@@ -1681,7 +1681,7 @@ static int velocity_init_td_ring(struct velocity_info *vptr)
static void velocity_free_dma_rings(struct velocity_info *vptr)
{
const int size = vptr->options.numrx * sizeof(struct rx_desc) +
- vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq;
+ vptr->options.numtx * sizeof(struct tx_desc) *vptr->tx.numq;
pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma);
}
@@ -1715,7 +1715,7 @@ err_free_dma_rings_0:
}
/**
- * velocity_free_tx_buf - free transmit buffer
+ * velocity_free_tx_buf - free transmit buffer
* @vptr: velocity
* @tdinfo: buffer
*
@@ -1776,7 +1776,7 @@ static void velocity_free_td_ring_entry(struct velocity_info *vptr,
}
/**
- * velocity_free_td_ring - free td ring
+ * velocity_free_td_ring - free td ring
* @vptr: velocity
*
* Free up the transmit ring for this particular velocity adapter.
@@ -1806,7 +1806,7 @@ static void velocity_free_rings(struct velocity_info *vptr)
}
/**
- * velocity_error - handle error from controller
+ * velocity_error - handle error from controller
* @vptr: velocity
* @status: card status
*
@@ -1895,7 +1895,7 @@ static void velocity_error(struct velocity_info *vptr, int status)
}
/**
- * tx_srv - transmit interrupt service
+ * tx_srv - transmit interrupt service
* @vptr; Velocity
*
* Scan the queues looking for transmitted packets that
@@ -1963,7 +1963,7 @@ static int velocity_tx_srv(struct velocity_info *vptr)
}
/**
- * velocity_rx_csum - checksum process
+ * velocity_rx_csum - checksum process
* @rd: receive packet descriptor
* @skb: network layer packet buffer
*
@@ -1987,14 +1987,14 @@ static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
}
/**
- * velocity_rx_copy - in place Rx copy for small packets
+ * velocity_rx_copy - in place Rx copy for small packets
* @rx_skb: network layer packet buffer candidate
* @pkt_size: received data size
* @rd: receive packet descriptor
* @dev: network device
*
* Replace the current skb that is scheduled for Rx processing by a
- * shorter, immediatly allocated skb, if the received packet is small
+ * shorter, immediately allocated skb, if the received packet is small
* enough. This function returns a negative value if the received
* packet is too big or if memory is exhausted.
*/
@@ -2018,7 +2018,7 @@ static int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size,
}
/**
- * velocity_iph_realign - IP header alignment
+ * velocity_iph_realign - IP header alignment
* @vptr: velocity we are handling
* @skb: network layer packet buffer
* @pkt_size: received data size
@@ -2037,7 +2037,7 @@ static inline void velocity_iph_realign(struct velocity_info *vptr,
/**
- * velocity_receive_frame - received packet processor
+ * velocity_receive_frame - received packet processor
* @vptr: velocity we are handling
* @idx: ring index
*
@@ -2107,7 +2107,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
/**
- * velocity_rx_srv - service RX interrupt
+ * velocity_rx_srv - service RX interrupt
* @vptr: velocity
*
* Walk the receive ring of the velocity adapter and remove
@@ -2191,7 +2191,7 @@ static int velocity_poll(struct napi_struct *napi, int budget)
}
/**
- * velocity_intr - interrupt callback
+ * velocity_intr - interrupt callback
* @irq: interrupt number
* @dev_instance: interrupting device
*
@@ -2232,14 +2232,14 @@ static irqreturn_t velocity_intr(int irq, void *dev_instance)
}
/**
- * velocity_open - interface activation callback
+ * velocity_open - interface activation callback
* @dev: network layer device to open
*
* Called when the network layer brings the interface up. Returns
* a negative posix error code on failure, or zero on success.
*
* All the ring allocation and set up is done on open for this
- * adapter to minimise memory usage when inactive
+ * adapter to minimize memory usage when inactive
*/
static int velocity_open(struct net_device *dev)
{
@@ -2275,7 +2275,7 @@ out:
}
/**
- * velocity_shutdown - shut down the chip
+ * velocity_shutdown - shut down the chip
* @vptr: velocity to deactivate
*
* Shuts down the internal operations of the velocity and
@@ -2293,7 +2293,7 @@ static void velocity_shutdown(struct velocity_info *vptr)
}
/**
- * velocity_change_mtu - MTU change callback
+ * velocity_change_mtu - MTU change callback
* @dev: network device
* @new_mtu: desired MTU
*
@@ -2374,7 +2374,7 @@ out_0:
}
/**
- * velocity_mii_ioctl - MII ioctl handler
+ * velocity_mii_ioctl - MII ioctl handler
* @dev: network device
* @ifr: the ifreq block for the ioctl
* @cmd: the command
@@ -2415,7 +2415,7 @@ static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd
/**
- * velocity_ioctl - ioctl entry point
+ * velocity_ioctl - ioctl entry point
* @dev: network device
* @rq: interface request ioctl
* @cmd: command code
@@ -2452,7 +2452,7 @@ static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
}
/**
- * velocity_get_status - statistics callback
+ * velocity_get_status - statistics callback
* @dev: network device
*
* Callback from the network layer to allow driver statistics
@@ -2477,24 +2477,24 @@ static struct net_device_stats *velocity_get_stats(struct net_device *dev)
dev->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
dev->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
-// unsigned long rx_dropped; /* no space in linux buffers */
+/* unsigned long rx_dropped; /* no space in linux buffers */
dev->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
/* detailed rx_errors: */
-// unsigned long rx_length_errors;
-// unsigned long rx_over_errors; /* receiver ring buff overflow */
+/* unsigned long rx_length_errors;
+/* unsigned long rx_over_errors; /* receiver ring buff overflow */
dev->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
-// unsigned long rx_frame_errors; /* recv'd frame alignment error */
-// unsigned long rx_fifo_errors; /* recv'r fifo overrun */
-// unsigned long rx_missed_errors; /* receiver missed packet */
+/* unsigned long rx_frame_errors; /* recv'd frame alignment error */
+/* unsigned long rx_fifo_errors; /* recv'r fifo overrun */
+/* unsigned long rx_missed_errors; /* receiver missed packet */
/* detailed tx_errors */
-// unsigned long tx_fifo_errors;
+/* unsigned long tx_fifo_errors;
return &dev->stats;
}
/**
- * velocity_close - close adapter callback
+ * velocity_close - close adapter callback
* @dev: network device
*
* Callback from the network layer when the velocity is being
@@ -2523,11 +2523,11 @@ static int velocity_close(struct net_device *dev)
}
/**
- * velocity_xmit - transmit packet callback
+ * velocity_xmit - transmit packet callback
* @skb: buffer to transmit
* @dev: network device
*
- * Called by the networ layer to request a packet is queued to
+ * Called by the network layer to request a packet is queued to
* the velocity. Returns zero on success.
*/
static netdev_tx_t velocity_xmit(struct sk_buff *skb,
@@ -2636,7 +2636,7 @@ static const struct net_device_ops velocity_netdev_ops = {
.ndo_start_xmit = velocity_xmit,
.ndo_get_stats = velocity_get_stats,
.ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
+ .ndo_set_mac_address = eth_mac_addr,
.ndo_set_multicast_list = velocity_set_multi,
.ndo_change_mtu = velocity_change_mtu,
.ndo_do_ioctl = velocity_ioctl,
@@ -2646,7 +2646,7 @@ static const struct net_device_ops velocity_netdev_ops = {
};
/**
- * velocity_init_info - init private data
+ * velocity_init_info - init private data
* @pdev: PCI device
* @vptr: Velocity info
* @info: Board type
@@ -2668,7 +2668,7 @@ static void __devinit velocity_init_info(struct pci_dev *pdev,
}
/**
- * velocity_get_pci_info - retrieve PCI info for device
+ * velocity_get_pci_info - retrieve PCI info for device
* @vptr: velocity device
* @pdev: PCI device it matches
*
@@ -2706,7 +2706,7 @@ static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pc
}
/**
- * velocity_print_info - per driver data
+ * velocity_print_info - per driver data
* @vptr: velocity
*
* Print per driver data as the kernel driver finds Velocity
@@ -2730,7 +2730,7 @@ static u32 velocity_get_link(struct net_device *dev)
/**
- * velocity_found1 - set up discovered velocity card
+ * velocity_found1 - set up discovered velocity card
* @pdev: PCI device
* @ent: PCI device table entry that matched
*
@@ -2877,7 +2877,7 @@ err_free_dev:
#ifdef CONFIG_PM
/**
- * wol_calc_crc - WOL CRC
+ * wol_calc_crc - WOL CRC
* @pattern: data pattern
* @mask_pattern: mask
*
@@ -2912,7 +2912,7 @@ static u16 wol_calc_crc(int size, u8 *pattern, u8 *mask_pattern)
}
/**
- * velocity_set_wol - set up for wake on lan
+ * velocity_set_wol - set up for wake on lan
* @vptr: velocity to set WOL status on
*
* Set a card up for wake on lan either by unicast or by
@@ -2957,7 +2957,7 @@ static int velocity_set_wol(struct velocity_info *vptr)
memcpy(arp->ar_tip, vptr->ip_addr, 4);
crc = wol_calc_crc((sizeof(struct arp_packet) + 7) / 8, buf,
- (u8 *) & mask_pattern[0][0]);
+ (u8 *) &mask_pattern[0][0]);
writew(crc, ®s->PatternCRC[0]);
writew(WOLCR_ARP_EN, ®s->WOLCRSet);
@@ -2997,7 +2997,7 @@ static int velocity_set_wol(struct velocity_info *vptr)
}
/**
- * velocity_save_context - save registers
+ * velocity_save_context - save registers
* @vptr: velocity
* @context: buffer for stored context
*
@@ -3058,7 +3058,7 @@ static int velocity_suspend(struct pci_dev *pdev, pm_message_t state)
}
/**
- * velocity_restore_context - restore registers
+ * velocity_restore_context - restore registers
* @vptr: velocity
* @context: buffer for stored context
*
@@ -3133,19 +3133,19 @@ static int velocity_resume(struct pci_dev *pdev)
* uses this to handle all our card discover and plugging
*/
static struct pci_driver velocity_driver = {
- .name = VELOCITY_NAME,
- .id_table = velocity_id_table,
- .probe = velocity_found1,
- .remove = __devexit_p(velocity_remove1),
+ .name = VELOCITY_NAME,
+ .id_table = velocity_id_table,
+ .probe = velocity_found1,
+ .remove = __devexit_p(velocity_remove1),
#ifdef CONFIG_PM
- .suspend = velocity_suspend,
- .resume = velocity_resume,
+ .suspend = velocity_suspend,
+ .resume = velocity_resume,
#endif
};
/**
- * velocity_ethtool_up - pre hook for ethtool
+ * velocity_ethtool_up - pre hook for ethtool
* @dev: network device
*
* Called before an ethtool operation. We need to make sure the
@@ -3160,7 +3160,7 @@ static int velocity_ethtool_up(struct net_device *dev)
}
/**
- * velocity_ethtool_down - post hook for ethtool
+ * velocity_ethtool_down - post hook for ethtool
* @dev: network device
*
* Called after an ethtool operation. Restore the chip back to D3
@@ -3352,8 +3352,7 @@ static int get_pending_timer_val(int val)
int mult_bits = val >> 6;
int mult = 1;
- switch (mult_bits)
- {
+ switch (mult_bits) {
case 1:
mult = 4; break;
case 2:
@@ -3454,7 +3453,7 @@ static const struct ethtool_ops velocity_ethtool_ops = {
.set_wol = velocity_ethtool_set_wol,
.get_msglevel = velocity_get_msglevel,
.set_msglevel = velocity_set_msglevel,
- .set_sg = ethtool_op_set_sg,
+ .set_sg = ethtool_op_set_sg,
.get_link = velocity_get_link,
.get_coalesce = velocity_get_coalesce,
.set_coalesce = velocity_set_coalesce,
@@ -3480,7 +3479,7 @@ static int velocity_netdev_event(struct notifier_block *nb, unsigned long notifi
#if defined(CONFIG_PM) && defined(CONFIG_INET)
static struct notifier_block velocity_inetaddr_notifier = {
- .notifier_call = velocity_netdev_event,
+ .notifier_call = velocity_netdev_event,
};
static void velocity_register_notifier(void)
@@ -3501,7 +3500,7 @@ static void velocity_unregister_notifier(void)
#endif /* defined(CONFIG_PM) && defined(CONFIG_INET) */
/**
- * velocity_init_module - load time function
+ * velocity_init_module - load time function
*
* Called when the velocity module is loaded. The PCI driver
* is registered with the PCI layer, and in turn will call
@@ -3520,7 +3519,7 @@ static int __init velocity_init_module(void)
}
/**
- * velocity_cleanup - module unload
+ * velocity_cleanup - module unload
*
* When the velocity hardware is unloaded this function is called.
* It will clean up the notifiers and the unregister the PCI
--
1.7.3.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists