| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1288315159-1350-6-git-send-email-paul.gortmaker@windriver.com>
Date: Thu, 28 Oct 2010 21:19:09 -0400
From: Paul Gortmaker <paul.gortmaker@...driver.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org
Subject: [PATCH 05/15] dec netdev: relocate DIGITAL based drivers to legacy
DEC as a name brand has been gone for over 10 years, and these
drivers represent technology from the 1990's like the venerable
ISA bus. Hence relocate them to the legacy dir.
Signed-off-by: Paul Gortmaker <paul.gortmaker@...driver.com>
---
drivers/net/Kconfig | 63 -----------------------------------
drivers/net/Makefile | 4 --
drivers/net/legacy/Kconfig | 63 +++++++++++++++++++++++++++++++++++
drivers/net/legacy/Makefile | 5 +++
drivers/net/{ => legacy}/declance.c | 0
drivers/net/{ => legacy}/defxx.c | 0
drivers/net/{ => legacy}/defxx.h | 0
drivers/net/{ => legacy}/depca.c | 0
drivers/net/{ => legacy}/depca.h | 0
drivers/net/{ => legacy}/ewrk3.c | 0
drivers/net/{ => legacy}/ewrk3.h | 0
11 files changed, 68 insertions(+), 67 deletions(-)
rename drivers/net/{ => legacy}/declance.c (100%)
rename drivers/net/{ => legacy}/defxx.c (100%)
rename drivers/net/{ => legacy}/defxx.h (100%)
rename drivers/net/{ => legacy}/depca.c (100%)
rename drivers/net/{ => legacy}/depca.h (100%)
rename drivers/net/{ => legacy}/ewrk3.c (100%)
rename drivers/net/{ => legacy}/ewrk3.h (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 511745d..fb58ea7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1104,19 +1104,6 @@ config AT1700
To compile this driver as a module, choose M here. The module
will be called at1700.
-config DEPCA
- tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
- depends on ISA || EISA || MCA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto> as well as
- <file:drivers/net/depca.c>.
-
- To compile this driver as a module, choose M here. The module
- will be called depca.
-
config HP100
tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
depends on ISA || EISA || PCI
@@ -1157,20 +1144,6 @@ config E2100
To compile this driver as a module, choose M here. The module
will be called e2100.
-config EWRK3
- tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
- depends on NET_ISA
- select CRC32
- ---help---
- This driver supports the DE203, DE204 and DE205 network (Ethernet)
- cards. If this is for you, say Y and read
- <file:Documentation/networking/ewrk3.txt> in the kernel source as
- well as the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called ewrk3.
-
config EEXPRESS
tristate "EtherExpress 16 support"
depends on NET_ISA
@@ -1852,15 +1825,6 @@ config SGISEEQ
Say Y here if you have an Seeq based Ethernet network card. This is
used in many Silicon Graphics machines.
-config DECLANCE
- tristate "DEC LANCE ethernet controller support"
- depends on MACH_DECSTATION
- select CRC32
- help
- This driver is for the series of Ethernet controllers produced by
- DEC (now Compaq) based on the AMD Lance chipset, including the
- DEPCA series. (This chipset is better known via the NE2100 cards.)
-
config 68360_ENET
bool "Motorola 68360 ethernet controller"
depends on M68360
@@ -2913,33 +2877,6 @@ config FDDI
then also Y to the driver for your FDDI card, below). Most people
will say N.
-config DEFXX
- tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
- depends on FDDI && (PCI || EISA || TC)
- ---help---
- This is support for the DIGITAL series of TURBOchannel (DEFTA),
- EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
- to a local FDDI network.
-
- To compile this driver as a module, choose M here: the module
- will be called defxx. If unsure, say N.
-
-config DEFXX_MMIO
- bool
- prompt "Use MMIO instead of PIO" if PCI || EISA
- depends on DEFXX
- default n if PCI || EISA
- default y
- ---help---
- This instructs the driver to use EISA or PCI memory-mapped I/O
- (MMIO) as appropriate instead of programmed I/O ports (PIO).
- Enabling this gives an improvement in processing time in parts
- of the driver, but it may cause problems with EISA (DEFEA)
- adapters. TURBOchannel does not have the concept of I/O ports,
- so MMIO is always used for these (DEFTA) adapters.
-
- If unsure, say N.
-
config SKFP
tristate "SysKonnect FDDI PCI support"
depends on FDDI && PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 152f8b5..f6536fe 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -175,7 +175,6 @@ obj-$(CONFIG_IFB) += ifb.o
obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
obj-$(CONFIG_LANCE) += lance.o
-obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_AT1700) += at1700.o
@@ -191,8 +190,6 @@ obj-$(CONFIG_8139CP) += 8139cp.o
obj-$(CONFIG_8139TOO) += 8139too.o
obj-$(CONFIG_ZNET) += znet.o
obj-$(CONFIG_CPMAC) += cpmac.o
-obj-$(CONFIG_DEPCA) += depca.o
-obj-$(CONFIG_EWRK3) += ewrk3.o
obj-$(CONFIG_ATP) += atp.o
obj-$(CONFIG_NI5010) += ni5010.o
obj-$(CONFIG_NI52) += ni52.o
@@ -219,7 +216,6 @@ obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-obj-$(CONFIG_DECLANCE) += declance.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
obj-$(CONFIG_A2065) += a2065.o
obj-$(CONFIG_HYDRA) += hydra.o 8390.o
diff --git a/drivers/net/legacy/Kconfig b/drivers/net/legacy/Kconfig
index 1af0740..ac163cc 100644
--- a/drivers/net/legacy/Kconfig
+++ b/drivers/net/legacy/Kconfig
@@ -66,3 +66,66 @@ config SUN3_82586
Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
that this driver does not support 82586-based adapters on additional
VME boards.
+
+config DEPCA
+ tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
+ depends on ISA || EISA || MCA
+ select CRC32
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto> as well as
+ <file:drivers/net/depca.c>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called depca.
+
+config EWRK3
+ tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
+ depends on NET_ISA
+ select CRC32
+ ---help---
+ This driver supports the DE203, DE204 and DE205 network (Ethernet)
+ cards. If this is for you, say Y and read
+ <file:Documentation/networking/ewrk3.txt> in the kernel source as
+ well as the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ewrk3.
+
+config DECLANCE
+ tristate "DEC LANCE ethernet controller support"
+ depends on MACH_DECSTATION
+ select CRC32
+ help
+ This driver is for the series of Ethernet controllers produced by
+ DEC (now Compaq) based on the AMD Lance chipset, including the
+ DEPCA series. (This chipset is better known via the NE2100 cards.)
+
+config DEFXX
+ tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
+ depends on FDDI && (PCI || EISA || TC)
+ ---help---
+ This is support for the DIGITAL series of TURBOchannel (DEFTA),
+ EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
+ to a local FDDI network.
+
+ To compile this driver as a module, choose M here: the module
+ will be called defxx. If unsure, say N.
+
+config DEFXX_MMIO
+ bool
+ prompt "Use MMIO instead of PIO" if PCI || EISA
+ depends on DEFXX
+ default n if PCI || EISA
+ default y
+ ---help---
+ This instructs the driver to use EISA or PCI memory-mapped I/O
+ (MMIO) as appropriate instead of programmed I/O ports (PIO).
+ Enabling this gives an improvement in processing time in parts
+ of the driver, but it may cause problems with EISA (DEFEA)
+ adapters. TURBOchannel does not have the concept of I/O ports,
+ so MMIO is always used for these (DEFTA) adapters.
+
+ If unsure, say N.
diff --git a/drivers/net/legacy/Makefile b/drivers/net/legacy/Makefile
index f552c77..7ab3669 100644
--- a/drivers/net/legacy/Makefile
+++ b/drivers/net/legacy/Makefile
@@ -8,3 +8,8 @@ obj-$(CONFIG_DE620) += de620.o
obj-$(CONFIG_SUN3_82586) += sun3_82586.o
obj-$(CONFIG_SUN3LANCE) += sun3lance.o
+
+obj-$(CONFIG_DEFXX) += defxx.o
+obj-$(CONFIG_DEPCA) += depca.o
+obj-$(CONFIG_EWRK3) += ewrk3.o
+obj-$(CONFIG_DECLANCE) += declance.o
diff --git a/drivers/net/declance.c b/drivers/net/legacy/declance.c
similarity index 100%
rename from drivers/net/declance.c
rename to drivers/net/legacy/declance.c
diff --git a/drivers/net/defxx.c b/drivers/net/legacy/defxx.c
similarity index 100%
rename from drivers/net/defxx.c
rename to drivers/net/legacy/defxx.c
diff --git a/drivers/net/defxx.h b/drivers/net/legacy/defxx.h
similarity index 100%
rename from drivers/net/defxx.h
rename to drivers/net/legacy/defxx.h
diff --git a/drivers/net/depca.c b/drivers/net/legacy/depca.c
similarity index 100%
rename from drivers/net/depca.c
rename to drivers/net/legacy/depca.c
diff --git a/drivers/net/depca.h b/drivers/net/legacy/depca.h
similarity index 100%
rename from drivers/net/depca.h
rename to drivers/net/legacy/depca.h
diff --git a/drivers/net/ewrk3.c b/drivers/net/legacy/ewrk3.c
similarity index 100%
rename from drivers/net/ewrk3.c
rename to drivers/net/legacy/ewrk3.c
diff --git a/drivers/net/ewrk3.h b/drivers/net/legacy/ewrk3.h
similarity index 100%
rename from drivers/net/ewrk3.h
rename to drivers/net/legacy/ewrk3.h
--
1.7.3.2.146.g2d444
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists