| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1289504565.17691.1710.camel@edumazet-laptop>
Date: Thu, 11 Nov 2010 20:42:45 +0100
From: Eric Dumazet <eric.dumazet@...il.com>
To: Jesse Gross <jesse@...ira.com>
Cc: David Miller <davem@...emloft.net>,
netdev <netdev@...r.kernel.org>,
Patrick McHardy <kaber@...sh.net>
Subject: [PATCH net-next-2.6] vlan: remove ndo_select_queue() logic
Le jeudi 11 novembre 2010 à 10:56 -0800, Jesse Gross a écrit :
> On Thu, Nov 11, 2010 at 9:52 AM, Eric Dumazet <eric.dumazet@...il.com> wrote:
> Before Tom's patch, a warning will be generated if a single queue vlan
> device is stacked on top of a multiqueue physical device that
> implements ndo_select_queue(). After Tom's patch, we avoid the
> warning so vlan_dev_select_queue() is merely dead code. Either way,
> what's the benefit in keeping it?
>
> >
> >
> > This logicaly is a second cleanup patch I believe.
>
> I'm not arguing against your patch, I just think it should go a step further.
Sure ! Here is the thing ;)
Thanks
[PATCH] vlan: remove ndo_select_queue() logic
Now vlan are lockless, we dont need special ndo_select_queue() logic.
dev_pick_tx() will do the multiqueue stuff on the real device transmit.
Suggested-by: Jesse Gross <jesse@...ira.com>
Signed-off-by: Eric Dumazet <eric.dumazet@...il.com>
---
net/8021q/vlan_dev.c | 71 +----------------------------------------
1 files changed, 3 insertions(+), 68 deletions(-)
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 3a67483..99d6910 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -390,14 +390,6 @@ static netdev_tx_t vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb,
return ret;
}
-static u16 vlan_dev_select_queue(struct net_device *dev, struct sk_buff *skb)
-{
- struct net_device *rdev = vlan_dev_info(dev)->real_dev;
- const struct net_device_ops *ops = rdev->netdev_ops;
-
- return ops->ndo_select_queue(rdev, skb);
-}
-
static int vlan_dev_change_mtu(struct net_device *dev, int new_mtu)
{
/* TODO: gotta make sure the underlying layer can handle it,
@@ -726,8 +718,7 @@ static const struct header_ops vlan_header_ops = {
.parse = eth_header_parse,
};
-static const struct net_device_ops vlan_netdev_ops, vlan_netdev_accel_ops,
- vlan_netdev_ops_sq, vlan_netdev_accel_ops_sq;
+static const struct net_device_ops vlan_netdev_ops, vlan_netdev_accel_ops;
static int vlan_dev_init(struct net_device *dev)
{
@@ -763,17 +754,11 @@ static int vlan_dev_init(struct net_device *dev)
if (real_dev->features & NETIF_F_HW_VLAN_TX) {
dev->header_ops = real_dev->header_ops;
dev->hard_header_len = real_dev->hard_header_len;
- if (real_dev->netdev_ops->ndo_select_queue)
- dev->netdev_ops = &vlan_netdev_accel_ops_sq;
- else
- dev->netdev_ops = &vlan_netdev_accel_ops;
+ dev->netdev_ops = &vlan_netdev_accel_ops;
} else {
dev->header_ops = &vlan_header_ops;
dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
- if (real_dev->netdev_ops->ndo_select_queue)
- dev->netdev_ops = &vlan_netdev_ops_sq;
- else
- dev->netdev_ops = &vlan_netdev_ops;
+ dev->netdev_ops = &vlan_netdev_ops;
}
if (is_vlan_dev(real_dev))
@@ -944,56 +929,6 @@ static const struct net_device_ops vlan_netdev_accel_ops = {
#endif
};
-static const struct net_device_ops vlan_netdev_ops_sq = {
- .ndo_select_queue = vlan_dev_select_queue,
- .ndo_change_mtu = vlan_dev_change_mtu,
- .ndo_init = vlan_dev_init,
- .ndo_uninit = vlan_dev_uninit,
- .ndo_open = vlan_dev_open,
- .ndo_stop = vlan_dev_stop,
- .ndo_start_xmit = vlan_dev_hard_start_xmit,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = vlan_dev_set_mac_address,
- .ndo_set_rx_mode = vlan_dev_set_rx_mode,
- .ndo_set_multicast_list = vlan_dev_set_rx_mode,
- .ndo_change_rx_flags = vlan_dev_change_rx_flags,
- .ndo_do_ioctl = vlan_dev_ioctl,
- .ndo_neigh_setup = vlan_dev_neigh_setup,
- .ndo_get_stats64 = vlan_dev_get_stats64,
-#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
- .ndo_fcoe_ddp_setup = vlan_dev_fcoe_ddp_setup,
- .ndo_fcoe_ddp_done = vlan_dev_fcoe_ddp_done,
- .ndo_fcoe_enable = vlan_dev_fcoe_enable,
- .ndo_fcoe_disable = vlan_dev_fcoe_disable,
- .ndo_fcoe_get_wwn = vlan_dev_fcoe_get_wwn,
-#endif
-};
-
-static const struct net_device_ops vlan_netdev_accel_ops_sq = {
- .ndo_select_queue = vlan_dev_select_queue,
- .ndo_change_mtu = vlan_dev_change_mtu,
- .ndo_init = vlan_dev_init,
- .ndo_uninit = vlan_dev_uninit,
- .ndo_open = vlan_dev_open,
- .ndo_stop = vlan_dev_stop,
- .ndo_start_xmit = vlan_dev_hwaccel_hard_start_xmit,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = vlan_dev_set_mac_address,
- .ndo_set_rx_mode = vlan_dev_set_rx_mode,
- .ndo_set_multicast_list = vlan_dev_set_rx_mode,
- .ndo_change_rx_flags = vlan_dev_change_rx_flags,
- .ndo_do_ioctl = vlan_dev_ioctl,
- .ndo_neigh_setup = vlan_dev_neigh_setup,
- .ndo_get_stats64 = vlan_dev_get_stats64,
-#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
- .ndo_fcoe_ddp_setup = vlan_dev_fcoe_ddp_setup,
- .ndo_fcoe_ddp_done = vlan_dev_fcoe_ddp_done,
- .ndo_fcoe_enable = vlan_dev_fcoe_enable,
- .ndo_fcoe_disable = vlan_dev_fcoe_disable,
- .ndo_fcoe_get_wwn = vlan_dev_fcoe_get_wwn,
-#endif
-};
-
void vlan_setup(struct net_device *dev)
{
ether_setup(dev);
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists