netdev - Re: [PATCH net-next-2.6 v2] can: Topcliff: PCH

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4CDD28E6.9060006@grandegger.com>
Date:	Fri, 12 Nov 2010 12:45:42 +0100
From:	Wolfgang Grandegger <wg@...ndegger.com>
To:	Tomoya MORINAGA <tomoya-linux@....okisemi.com>
CC:	andrew.chih.howe.khor@...el.com,
	Masayuki Ohtake <masa-korg@....okisemi.com>,
	Samuel Ortiz <sameo@...ux.intel.com>, margie.foster@...el.com,
	netdev@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>,
	socketcan-core@...ts.berlios.de, yong.y.wang@...el.com,
	Marc Kleine-Budde <mkl@...gutronix.de>, joel.clark@...el.com,
	kok.howg.ewe@...el.com, "David S. Miller" <davem@...emloft.net>,
	Christian Pellegrin <chripell@...e.org>, qi.wang@...el.com
Subject: Re: [PATCH net-next-2.6 v2] can: Topcliff: PCH_CAN driver: Fix build
 warnings

On 11/12/2010 12:10 PM, Tomoya MORINAGA wrote:
> On Saturday, October 30, 2010 4:32 AM, Wolfgang Grandegger wrote :
> 
> Sorry, for my late.
> 
>>>> +
>>>> +#define PCH_RX_OK 0x00000010
>>>> +#define PCH_TX_OK 0x00000008
>>>> +#define PCH_BUS_OFF 0x00000080
>>>> +#define PCH_EWARN 0x00000040
>>>> +#define PCH_EPASSIV 0x00000020
>>>> +#define PCH_LEC0 0x00000001
>>>> +#define PCH_LEC1 0x00000002
>>>> +#define PCH_LEC2 0x00000004
>>>
>>> These are just single set bit, please use BIT()
>>> Consider adding the name of the corresponding register to the define's
>>> name.
> 
> I agree.
> 
>>>
>>>> +#define PCH_LEC_ALL (PCH_LEC0 | PCH_LEC1 | PCH_LEC2)
>>>> +#define PCH_STUF_ERR PCH_LEC0
>>>> +#define PCH_FORM_ERR PCH_LEC1
>>>> +#define PCH_ACK_ERR (PCH_LEC0 | PCH_LEC1)
>>>> +#define PCH_BIT1_ERR PCH_LEC2
>>>> +#define PCH_BIT0_ERR (PCH_LEC0 | PCH_LEC2)
>>>> +#define PCH_CRC_ERR (PCH_LEC1 | PCH_LEC2)
>>
>> This is an enumeration:
>>
>> enum {
>> PCH_STUF_ERR = 1,
>> PCH_FORM_ERR,
>> PCH_ACK_ERR,
>> PCH_BIT1_ERR;
>> PCH_BIT0_ERR,
>> PCH_CRC_ERR,
>> PCH_LEC_ALL;
>> }
> 
> No, 
> LEC is for bit assignment.
> Thus, "enum" can't be used.

Why? For me it's a classical enum because the value matters, and *not*
the individual bit. Do you agree?

>>> I suggest to convert to a if-bit-set because there might be more than
>>> one bit set.
>>
>> Marc, what do you mean here. It's an enumeraton. Maybe the following
>> code is more clear:
>>
>> lec = status & PCH_LEC_ALL;
>> if (lec > 0) {
>> switch (lec) {
> 
> No.
> LEC is not enum.

See also my sub-sequent comment here:

http://marc.info/?l=linux-netdev&m=128880088907148&w=2

>>>> + case PCH_STUF_ERR:
>>>> + cf->data[2] |= CAN_ERR_PROT_STUFF;
>>>> + break;
>>>> + case PCH_FORM_ERR:
>>>> + cf->data[2] |= CAN_ERR_PROT_FORM;
>>>> + break;
>>>> + case PCH_ACK_ERR:
>>>> + cf->data[2] |= CAN_ERR_PROT_LOC_ACK |
>>>> +        CAN_ERR_PROT_LOC_ACK_DEL;
>>
>> Could you check what that type of bus error that is? Usually it's a ack
>> lost error.
> 
> I will modify.
> BTW, I can see ti_hecc also has the above the same code.

Yes, also the AT91 driver uses a somehow incorrect error mask. I will
check and provide a patch a.s.a.p.

>>
>>>> + break;
>>>> + case PCH_BIT1_ERR:
>>>> + case PCH_BIT0_ERR:
>>>> + cf->data[2] |= CAN_ERR_PROT_BIT;
>>>> + break;
>>>> + case PCH_CRC_ERR:
>>>> + cf->data[2] |= CAN_ERR_PROT_LOC_CRC_SEQ |
>>>> +        CAN_ERR_PROT_LOC_CRC_DEL;
>>>> + break;
>>>> + default:
>>>> + iowrite32(status | PCH_LEC_ALL, &priv->regs->stat);
>>>> + break;
>>>> + }
>>>> +
>>>> + }
>>
>> Also, could you please add the TEC and REC:
>>
>> cf->data[6] = ioread32(&priv->regs->errc) & CAN_TEC;
>> cf->data[7] = (ioread32(&priv->regs->errc) & CAN_REC) >> 8;
> 
> I will add.

BTW: it could be done with one I/O call:

  errc = ioread32(&priv->regs->errc);
  cf->data[6] = errc & CAN_TEC;
  cf->data[7] = (errc & CAN_REC) >> 8;

> But I couldn't find 

Don't understand? It's also implemented for the SJA1000 driver:

http://lxr.linux.no/#linux+v2.6.36/drivers/net/can/sja1000/sja1000.c#L466

Wolfgang.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html