[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1291234623.3170.17.camel@bwh-desktop>
Date: Wed, 01 Dec 2010 20:17:03 +0000
From: Ben Hutchings <bhutchings@...arflare.com>
To: Mahesh Bandewar <maheshb@...gle.com>
Cc: David Miller <davem@...emloft.net>,
linux-netdev <netdev@...r.kernel.org>,
laurent chavey <chavey@...gle.com>
Subject: Re: [PATCH v3] Net-ethtool : Allow ethtool to set interface in
loopback mode.
On Wed, 2010-12-01 at 12:14 -0800, Mahesh Bandewar wrote:
> This patch enables ethtool to set the loopback mode on a given
> interface. By configuring the interface in loopback mode in conjunction
> with a policy route / rule, a userland application can stress the egress /
> ingress path exposing the flows of the change in progress and potentially
> help developer(s) understand the impact of those changes without even
> sending a packet out on the network.
>
> Following set of commands illustrates one such example -
> a) ip -4 addr add 192.168.1.1/24 dev eth1
> b) ip -4 rule add from all iif eth1 lookup 250
> c) ip -4 route add local 0/0 dev lo proto kernel scope host table 250
> d) arp -Ds 192.168.1.100 eth1
> e) arp -Ds 192.168.1.200 eth1
> f) sysctl -w net.ipv4.ip_nonlocal_bind=1
> g) sysctl -w net.ipv4.conf.all.accept_local=1
> # Assuming that the machine has 8 cores
> h) taskset 000f netserver -L 192.168.1.200
> i) taskset 00f0 netperf -t TCP_CRR -L 192.168.1.100 -H 192.168.1.200 -l 30
>
> Signed-off-by: Mahesh Bandewar <maheshb@...gle.com>
[...]
Reviewed-by: Ben Hutchings <bhutchings@...arflare.com>
Ben.
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists