[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20101202065921.13413.91380.stgit@localhost.localdomain>
Date: Wed, 01 Dec 2010 22:59:25 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, gospo@...hat.com, bphilips@...ell.com,
Don Skidmore <donald.c.skidmore@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next-2.6 PATCH] ixgbe: fix for link failure on SFP+ DA cables
From: Don Skidmore <donald.c.skidmore@...el.com>
This patch helps prevent FW/SW semaphore collision from leading
to link establishment failure. The collision might mess up the
PHY registers so we reset the PHY. However there are SFI/KR areas
in the PHY that are not reset with a Reset_AN so we need to change
LMS to reset it. Also wait until AN state machine is AN_GOOD
Signed-off-by: Don Skidmore <donald.c.skidmore@...el.com>
Tested-by: Stephen Ko <stephen.s.ko@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ixgbe/ixgbe_82599.c | 28 +++++++++++++++++++++++++---
drivers/net/ixgbe/ixgbe_type.h | 3 +++
2 files changed, 28 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index e34643e..26b8ceb 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -90,6 +90,8 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
{
s32 ret_val = 0;
+ u32 reg_anlp1 = 0;
+ u32 i = 0;
u16 list_offset, data_offset, data_value;
if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
@@ -116,14 +118,34 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
IXGBE_WRITE_FLUSH(hw);
hw->eeprom.ops.read(hw, ++data_offset, &data_value);
}
- /* Now restart DSP by setting Restart_AN */
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
- (IXGBE_READ_REG(hw, IXGBE_AUTOC) | IXGBE_AUTOC_AN_RESTART));
/* Release the semaphore */
ixgbe_release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
/* Delay obtaining semaphore again to allow FW access */
msleep(hw->eeprom.semaphore_delay);
+
+ /* Now restart DSP by setting Restart_AN and clearing LMS */
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw,
+ IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) |
+ IXGBE_AUTOC_AN_RESTART));
+
+ /* Wait for AN to leave state 0 */
+ for (i = 0; i < 10; i++) {
+ msleep(4);
+ reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+ if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)
+ break;
+ }
+ if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) {
+ hw_dbg(hw, "sfp module setup not complete\n");
+ ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
+ goto setup_sfp_out;
+ }
+
+ /* Restart DSP by setting Restart_AN and return to SFI mode */
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw,
+ IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL |
+ IXGBE_AUTOC_AN_RESTART));
}
setup_sfp_out:
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 42c6073..20e1f03 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -1467,6 +1467,8 @@
#define IXGBE_ANLP1_PAUSE 0x0C00
#define IXGBE_ANLP1_SYM_PAUSE 0x0400
#define IXGBE_ANLP1_ASM_PAUSE 0x0800
+#define IXGBE_ANLP1_AN_STATE_MASK 0x000f0000
+
/* SW Semaphore Register bitmasks */
#define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
@@ -2634,6 +2636,7 @@ struct ixgbe_info {
#define IXGBE_ERR_NO_SPACE -25
#define IXGBE_ERR_OVERTEMP -26
#define IXGBE_ERR_RAR_INDEX -27
+#define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE -30
#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF
#endif /* _IXGBE_TYPE_H_ */
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists