| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1291862457-16671-5-git-send-email-asbjorn@asbjorn.biz>
Date: Thu, 9 Dec 2010 02:40:54 +0000
From: Asbjoern Sloth Toennesen <asbjorn@...jorn.biz>
To: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Cc: e1000-devel@...ts.sourceforge.net, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 4/7] e1000e: cleanup: fix long lines
This patch breaks long lines, so they do not exceed 80 characters.
Fixes 2 errors and 26 warnings reported by checkpatch.
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@...jorn.biz>
---
drivers/net/e1000e/defines.h | 15 ++++++++++-----
drivers/net/e1000e/e1000.h | 27 ++++++++++++++++++---------
drivers/net/e1000e/es2lan.c | 3 ++-
drivers/net/e1000e/ethtool.c | 3 ++-
drivers/net/e1000e/lib.c | 12 ++++++++----
drivers/net/e1000e/netdev.c | 18 +++++++++++-------
drivers/net/e1000e/param.c | 6 ++++--
7 files changed, 55 insertions(+), 29 deletions(-)
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 10760be..f1260fc 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -83,8 +83,10 @@
#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
#define E1000_CTRL_EXT_EIAME 0x01000000
#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
-#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
-#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge
+ * Auto-mask */
+#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers
+ * after IMS clear */
#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
#define E1000_CTRL_EXT_PHYPDEN 0x00100000
@@ -247,7 +249,8 @@
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
-#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master
+ * requests. */
/* Constants used to interpret the masked PCI-X bus speed. */
@@ -394,7 +397,8 @@
#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */
#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
-#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver
+ * should claim the interrupt */
#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */
#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
@@ -612,7 +616,8 @@
#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES)
-#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write registers */
+#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM
+ * read/write registers */
#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
#define E1000_NVM_RW_REG_START 1 /* Start operation */
#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 47eb0ba..97fa58a 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -542,8 +542,10 @@ extern s32 e1000e_led_off_generic(struct e1000_hw *hw);
extern s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
extern void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw);
extern void e1000_set_lan_id_single_port(struct e1000_hw *hw);
-extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex);
-extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex);
+extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw,
+ u16 *speed, u16 *duplex);
extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
extern s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
extern s32 e1000e_id_led_init(struct e1000_hw *hw);
@@ -566,7 +568,8 @@ extern void e1000e_config_collision_dist(struct e1000_hw *hw);
extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
extern s32 e1000e_blink_led(struct e1000_hw *hw);
-extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
+extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset,
+ u32 value);
extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
extern void e1000e_reset_adaptive(struct e1000_hw *hw);
extern void e1000e_update_adaptive(struct e1000_hw *hw);
@@ -600,7 +603,8 @@ extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
-extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
+extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+ u16 *phy_ctrl);
extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
u16 data);
@@ -661,10 +665,12 @@ static inline s32 e1000_get_cable_length(struct e1000_hw *hw)
}
extern s32 e1000e_acquire_nvm(struct e1000_hw *hw);
-extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw);
extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
-extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
extern void e1000e_release_nvm(struct e1000_hw *hw);
extern void e1000e_reload_nvm(struct e1000_hw *hw);
@@ -688,12 +694,14 @@ static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw)
return hw->nvm.ops.update(hw);
}
-static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
return hw->nvm.ops.read(hw, offset, words, data);
}
-static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
return hw->nvm.ops.write(hw, offset, words, data);
}
@@ -710,7 +718,8 @@ static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw)
extern bool e1000e_check_mng_mode_generic(struct e1000_hw *hw);
extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
-extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
+extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer,
+ u16 length);
static inline u32 __er32(struct e1000_hw *hw, unsigned long reg)
{
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 6069e9f..56a1321 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -233,7 +233,8 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
/* check for link */
switch (hw->phy.media_type) {
case e1000_media_type_copper:
- func->setup_physical_interface = e1000_setup_copper_link_80003es2lan;
+ func->setup_physical_interface =
+ e1000_setup_copper_link_80003es2lan;
func->check_for_link = e1000e_check_for_copper_link;
break;
case e1000_media_type_fiber:
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 8ff3a8a..4fee336 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -567,7 +567,8 @@ static int e1000_set_eeprom(struct net_device *netdev,
if (eeprom->len == 0)
return -EOPNOTSUPP;
- if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
+ if (eeprom->magic != (adapter->pdev->vendor |
+ (adapter->pdev->device << 16)))
return -EFAULT;
if (adapter->flags & FLAG_READ_ONLY_NVM)
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 513b4d1..b950db3 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -1135,7 +1135,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg);
if (ret_val)
return ret_val;
- ret_val = e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg);
+ ret_val = e1e_rphy(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
if (ret_val)
return ret_val;
@@ -1266,7 +1267,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
* Read the status register for the current speed/duplex and store the current
* speed and duplex for copper connections.
**/
-s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
{
u32 status;
@@ -1299,7 +1301,8 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup
* Sets the speed and duplex to gigabit full duplex (the only possible option)
* for fiber/serdes links.
**/
-s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
{
*speed = SPEED_1000;
*duplex = FULL_DUPLEX;
@@ -2359,7 +2362,8 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
for (i = 0; i < len; i++)
- *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset + i);
+ *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF,
+ offset + i);
hdr_csum = hdr->checksum;
hdr->checksum = 0;
csum = e1000_calculate_checksum((u8 *)hdr,
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index d71854f..bb6a1f5 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -601,7 +601,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
ps_page = &buffer_info->ps_pages[j];
if (j >= adapter->rx_ps_pages) {
/* all unused desc entries get hw null ptr */
- rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
+ rx_desc->read.buffer_addr[j+1] =
+ ~cpu_to_le64(0);
continue;
}
if (!ps_page->page) {
@@ -871,7 +872,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
((u32)(rx_desc->errors) << 24),
le16_to_cpu(rx_desc->csum), skb);
- e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
+ e1000_receive_skb(adapter, netdev, skb, status,
+ rx_desc->special);
next_desc:
rx_desc->status = 0;
@@ -2372,7 +2374,8 @@ err:
**/
static int e1000_clean(struct napi_struct *napi, int budget)
{
- struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
+ struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter,
+ napi);
struct e1000_hw *hw = &adapter->hw;
struct net_device *poll_dev = adapter->netdev;
int tx_cleaned = 1, work_done = 0;
@@ -4664,9 +4667,9 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
u16 length, offset;
if (vlan_tx_tag_present(skb)) {
- if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
- (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
+ if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id)
+ && (adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
return 0;
}
@@ -6079,7 +6082,8 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP),
+ board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 2687295..992be2b 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -147,7 +147,8 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
*
* Default Value: 1 (enabled)
*/
-E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
+E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling "
+ "this can lead to corrupted NVM]");
/*
* Enable CRC Stripping
@@ -464,7 +465,8 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
if (adapter->flags & FLAG_IS_ICH) {
if (num_WriteProtectNVM > bd) {
- unsigned int write_protect_nvm = WriteProtectNVM[bd];
+ unsigned int write_protect_nvm =
+ WriteProtectNVM[bd];
e1000_validate_option(&write_protect_nvm, &opt,
adapter);
if (write_protect_nvm)
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists