| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1291974667-30254-10-git-send-email-jeffrey.t.kirsher@intel.com>
Date: Fri, 10 Dec 2010 01:50:49 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emleft.org
Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>, netdev@...r.kernel.org,
gospo@...hat.com, bphilips@...ell.com, joe@...ches.com
Subject: [net-next-2.6 09/27] Intel Wired LAN drivers: Use static const
Based on work by Joe Perches <joe@...ches.com>
Using static const to decrease data and overall object size.
CC: Joe Perches <joe@...ches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Tested-by: Emil Tantilov <emil.s.tantilov@...el.com>
---
drivers/net/e1000/e1000_hw.c | 20 ++++++++++----------
drivers/net/e1000/e1000_param.c | 13 +++++++------
drivers/net/e1000e/phy.c | 11 ++++++-----
drivers/net/igb/e1000_phy.c | 11 ++++++-----
drivers/net/ixgb/ixgb_param.c | 21 +++++++++++----------
drivers/net/ixgbe/ixgbe_ethtool.c | 24 ++++++++++++++----------
drivers/net/ixgbevf/ethtool.c | 18 +++++++++++-------
7 files changed, 65 insertions(+), 53 deletions(-)
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index c7e242b6..77d08e6 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -4892,11 +4892,11 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
} else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
u16 cur_agc_value;
u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
- u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
- { IGP01E1000_PHY_AGC_A,
- IGP01E1000_PHY_AGC_B,
- IGP01E1000_PHY_AGC_C,
- IGP01E1000_PHY_AGC_D
+ static const u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {
+ IGP01E1000_PHY_AGC_A,
+ IGP01E1000_PHY_AGC_B,
+ IGP01E1000_PHY_AGC_C,
+ IGP01E1000_PHY_AGC_D
};
/* Read the AGC registers for all channels */
for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
@@ -5071,11 +5071,11 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
{
s32 ret_val;
u16 phy_data, phy_saved_data, speed, duplex, i;
- u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
- { IGP01E1000_PHY_AGC_PARAM_A,
- IGP01E1000_PHY_AGC_PARAM_B,
- IGP01E1000_PHY_AGC_PARAM_C,
- IGP01E1000_PHY_AGC_PARAM_D
+ static const u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {
+ IGP01E1000_PHY_AGC_PARAM_A,
+ IGP01E1000_PHY_AGC_PARAM_B,
+ IGP01E1000_PHY_AGC_PARAM_C,
+ IGP01E1000_PHY_AGC_PARAM_D
};
u16 min_length, max_length;
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index 10d8d98..1301eba 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -352,12 +352,13 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
}
{ /* Flow Control */
- struct e1000_opt_list fc_list[] =
- {{ E1000_FC_NONE, "Flow Control Disabled" },
- { E1000_FC_RX_PAUSE,"Flow Control Receive Only" },
- { E1000_FC_TX_PAUSE,"Flow Control Transmit Only" },
- { E1000_FC_FULL, "Flow Control Enabled" },
- { E1000_FC_DEFAULT, "Flow Control Hardware Default" }};
+ static const struct e1000_opt_list fc_list[] = {
+ { E1000_FC_NONE, "Flow Control Disabled" },
+ { E1000_FC_RX_PAUSE, "Flow Control Receive Only" },
+ { E1000_FC_TX_PAUSE, "Flow Control Transmit Only" },
+ { E1000_FC_FULL, "Flow Control Enabled" },
+ { E1000_FC_DEFAULT, "Flow Control Hardware Default" }
+ };
opt = (struct e1000_option) {
.type = list_option,
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 3d3dc0c..6ad90cc 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1840,11 +1840,12 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
u16 phy_data, i, agc_value = 0;
u16 cur_agc_index, max_agc_index = 0;
u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
- u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
- {IGP02E1000_PHY_AGC_A,
- IGP02E1000_PHY_AGC_B,
- IGP02E1000_PHY_AGC_C,
- IGP02E1000_PHY_AGC_D};
+ static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
+ IGP02E1000_PHY_AGC_A,
+ IGP02E1000_PHY_AGC_B,
+ IGP02E1000_PHY_AGC_C,
+ IGP02E1000_PHY_AGC_D
+ };
/* Read the AGC registers for all channels */
for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c
index ddd036a..6694bf3 100644
--- a/drivers/net/igb/e1000_phy.c
+++ b/drivers/net/igb/e1000_phy.c
@@ -1757,11 +1757,12 @@ s32 igb_get_cable_length_igp_2(struct e1000_hw *hw)
u16 phy_data, i, agc_value = 0;
u16 cur_agc_index, max_agc_index = 0;
u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
- u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
- {IGP02E1000_PHY_AGC_A,
- IGP02E1000_PHY_AGC_B,
- IGP02E1000_PHY_AGC_C,
- IGP02E1000_PHY_AGC_D};
+ static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
+ IGP02E1000_PHY_AGC_A,
+ IGP02E1000_PHY_AGC_B,
+ IGP02E1000_PHY_AGC_C,
+ IGP02E1000_PHY_AGC_D
+ };
/* Read the AGC registers for all channels */
for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
diff --git a/drivers/net/ixgb/ixgb_param.c b/drivers/net/ixgb/ixgb_param.c
index 88a08f0..dd7fbeb 100644
--- a/drivers/net/ixgb/ixgb_param.c
+++ b/drivers/net/ixgb/ixgb_param.c
@@ -191,9 +191,9 @@ struct ixgb_option {
} r;
struct { /* list_option info */
int nr;
- struct ixgb_opt_list {
+ const struct ixgb_opt_list {
int i;
- char *str;
+ const char *str;
} *p;
} l;
} arg;
@@ -226,7 +226,7 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
break;
case list_option: {
int i;
- struct ixgb_opt_list *ent;
+ const struct ixgb_opt_list *ent;
for (i = 0; i < opt->arg.l.nr; i++) {
ent = &opt->arg.l.p[i];
@@ -322,14 +322,15 @@ ixgb_check_options(struct ixgb_adapter *adapter)
}
{ /* Flow Control */
- struct ixgb_opt_list fc_list[] =
- {{ ixgb_fc_none, "Flow Control Disabled" },
- { ixgb_fc_rx_pause,"Flow Control Receive Only" },
- { ixgb_fc_tx_pause,"Flow Control Transmit Only" },
- { ixgb_fc_full, "Flow Control Enabled" },
- { ixgb_fc_default, "Flow Control Hardware Default" }};
+ static const struct ixgb_opt_list fc_list[] = {
+ { ixgb_fc_none, "Flow Control Disabled" },
+ { ixgb_fc_rx_pause, "Flow Control Receive Only" },
+ { ixgb_fc_tx_pause, "Flow Control Transmit Only" },
+ { ixgb_fc_full, "Flow Control Enabled" },
+ { ixgb_fc_default, "Flow Control Hardware Default" }
+ };
- const struct ixgb_option opt = {
+ static const struct ixgb_option opt = {
.type = list_option,
.name = "Flow Control",
.err = "reading default settings from EEPROM",
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index ef3f910..90a740d 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -1157,7 +1157,7 @@ struct ixgbe_reg_test {
#define TABLE64_TEST_HI 6
/* default 82599 register test */
-static struct ixgbe_reg_test reg_test_82599[] = {
+static const struct ixgbe_reg_test reg_test_82599[] = {
{ IXGBE_FCRTL_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
{ IXGBE_FCRTH_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
{ IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
@@ -1181,7 +1181,7 @@ static struct ixgbe_reg_test reg_test_82599[] = {
};
/* default 82598 register test */
-static struct ixgbe_reg_test reg_test_82598[] = {
+static const struct ixgbe_reg_test reg_test_82598[] = {
{ IXGBE_FCRTL(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
{ IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
{ IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
@@ -1208,18 +1208,22 @@ static struct ixgbe_reg_test reg_test_82598[] = {
{ 0, 0, 0, 0 }
};
+static const u32 register_test_patterns[] = {
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
+};
+
#define REG_PATTERN_TEST(R, M, W) \
{ \
u32 pat, val, before; \
- const u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \
- for (pat = 0; pat < ARRAY_SIZE(_test); pat++) { \
+ for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) { \
before = readl(adapter->hw.hw_addr + R); \
- writel((_test[pat] & W), (adapter->hw.hw_addr + R)); \
+ writel((register_test_patterns[pat] & W), \
+ (adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
- if (val != (_test[pat] & W & M)) { \
- e_err(drv, "pattern test reg %04X failed: got " \
- "0x%08X expected 0x%08X\n", \
- R, val, (_test[pat] & W & M)); \
+ if (val != (register_test_patterns[pat] & W & M)) { \
+ e_err(drv, "pattern test reg %04X failed: got " \
+ "0x%08X expected 0x%08X\n", \
+ R, val, (register_test_patterns[pat] & W & M)); \
*data = R; \
writel(before, adapter->hw.hw_addr + R); \
return 1; \
@@ -1246,7 +1250,7 @@ static struct ixgbe_reg_test reg_test_82598[] = {
static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
{
- struct ixgbe_reg_test *test;
+ const struct ixgbe_reg_test *test;
u32 value, before, after;
u32 i, toggle;
diff --git a/drivers/net/ixgbevf/ethtool.c b/drivers/net/ixgbevf/ethtool.c
index 4cc817a..fa29b3c 100644
--- a/drivers/net/ixgbevf/ethtool.c
+++ b/drivers/net/ixgbevf/ethtool.c
@@ -544,7 +544,7 @@ struct ixgbevf_reg_test {
#define TABLE64_TEST_HI 6
/* default VF register test */
-static struct ixgbevf_reg_test reg_test_vf[] = {
+static const struct ixgbevf_reg_test reg_test_vf[] = {
{ IXGBE_VFRDBAL(0), 2, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 },
{ IXGBE_VFRDBAH(0), 2, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
{ IXGBE_VFRDLEN(0), 2, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
@@ -557,19 +557,23 @@ static struct ixgbevf_reg_test reg_test_vf[] = {
{ 0, 0, 0, 0 }
};
+static const u32 register_test_patterns[] = {
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
+};
+
#define REG_PATTERN_TEST(R, M, W) \
{ \
u32 pat, val, before; \
- const u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \
- for (pat = 0; pat < ARRAY_SIZE(_test); pat++) { \
+ for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) { \
before = readl(adapter->hw.hw_addr + R); \
- writel((_test[pat] & W), (adapter->hw.hw_addr + R)); \
+ writel((register_test_patterns[pat] & W), \
+ (adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
- if (val != (_test[pat] & W & M)) { \
+ if (val != (register_test_patterns[pat] & W & M)) { \
hw_dbg(&adapter->hw, \
"pattern test reg %04X failed: got " \
"0x%08X expected 0x%08X\n", \
- R, val, (_test[pat] & W & M)); \
+ R, val, (register_test_patterns[pat] & W & M)); \
*data = R; \
writel(before, adapter->hw.hw_addr + R); \
return 1; \
@@ -596,7 +600,7 @@ static struct ixgbevf_reg_test reg_test_vf[] = {
static int ixgbevf_reg_test(struct ixgbevf_adapter *adapter, u64 *data)
{
- struct ixgbevf_reg_test *test;
+ const struct ixgbevf_reg_test *test;
u32 i;
test = reg_test_vf;
--
1.7.3.2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists