| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1292444895.27593.6.camel@wwguy-ubuntu>
Date: Wed, 15 Dec 2010 12:28:15 -0800
From: "Guy, Wey-Yi" <wey-yi.w.guy@...el.com>
To: "John W. Linville" <linville@...driver.com>
Cc: Evgeniy Polyakov <zbr@...emap.net>, Zhu Yi <yi.zhu@...el.com>,
Intel Linux Wireless <ilw@...ux.intel.com>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-wireless@...r.kernel.org" <linux-wireless@...r.kernel.org>
Subject: Re: iwl rfkill suddenly dropped to hard block
Can we get a full PCI config space dump for both root complex and
endpoint
sudo lspci -s 00:1c.1 -xxx
sudo lspci -s 03:00.0 -xxx
Thanks
Wey
On Wed, 2010-12-15 at 12:11 -0800, John W. Linville wrote:
> Cc'ing linux-wireless and Wey-Yi...
>
> To be honest, nearly every report of "suddenly my rfkill is stuck
> on" is because the laptop has multiple rfkill keys, usually with
> one of them a slider along the edge of the case. In particular,
> Thinkpads have such switches. The slider gets accidently engaged
> (possibly while the laptop is being transported or somesuch) and
> suddenly wireless stops working.
>
> Please check for the above. If you are sure that isn't the case, then
> please try to determine the last working kernel and do a bisection --
> hopefully you don't have to go all the way back to 2.6.33!
>
> Hth!
>
> John
>
> On Wed, Dec 15, 2010 at 10:56:52PM +0300, Evgeniy Polyakov wrote:
> > Hi.
> >
> > Yesterday the latest git kernel (as of 2 days pull + i915 drm fixes
> > tree) decided to turn my iwl agn adapter off.
> > rfkill says it is hard blocked. It worked pretty well for the last
> > several days for sure, but there was a suspend/wakeup (unsuccessful
> > because i915 did not flash the display).
> >
> > With 2.6.33 kernel it worked for months (although without sound).
> > Other (newer) stock kernels from FC13 do not turn on LCD.
> >
> > My tree is at 63abf3eda, which likely comes from drm-fixes or
> > drm-staging kernel tree, but it is just 2 or 3 commits ahead of vanilla
> > HEAD, but the same happens with 2.6.33.3-85 kernel from FC13.
> >
> > Attached full dmesg with iwlagn debug=127 and lspci -vvv -H1
> >
> > Thank you.
> >
> > --
> > Evgeniy Polyakov
>
> > Initializing cgroup subsys cpuset
> > Initializing cgroup subsys cpu
> > Linux version 2.6.37-rc5-mainline+ (zbr@...ana) (gcc version 4.4.5 20101112 (Red Hat 4.4.5-2) (GCC) ) #4 SMP Sat Dec 11 16:37:52 MSK 2010
> > Command line: ro root=/dev/mapper/vg_gavana-lv_root rd_LVM_LV=vg_gavana/lv_root rd_LVM_LV=vg_gavana/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet
> > BIOS-provided physical RAM map:
> > BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
> > BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
> > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> > BIOS-e820: 0000000000100000 - 00000000db65f000 (usable)
> > BIOS-e820: 00000000db65f000 - 00000000db67f000 (ACPI data)
> > BIOS-e820: 00000000db67f000 - 00000000db76f000 (ACPI NVS)
> > BIOS-e820: 00000000db76f000 - 00000000dc000000 (reserved)
> > BIOS-e820: 00000000dde00000 - 00000000e0000000 (reserved)
> > BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> > BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
> > BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
> > BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> > BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
> > BIOS-e820: 0000000100000000 - 000000011c000000 (usable)
> > NX (Execute Disable) protection: active
> > DMI 2.6 present.
> > DMI: 0T26D8/Latitude E4310, BIOS A04 08/10/2010
> > e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
> > e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> > No AGP bridge found
> > last_pfn = 0x11c000 max_arch_pfn = 0x400000000
> > MTRR default type: uncachable
> > MTRR fixed ranges enabled:
> > 00000-9FFFF write-back
> > A0000-BFFFF uncachable
> > C0000-FFFFF write-protect
> > MTRR variable ranges enabled:
> > 0 base 000000000 mask F80000000 write-back
> > 1 base 080000000 mask FC0000000 write-back
> > 2 base 0C0000000 mask FE0000000 write-back
> > 3 base 0DC000000 mask FFC000000 uncachable
> > 4 base 100000000 mask FE0000000 write-back
> > 5 base 11C000000 mask FFC000000 uncachable
> > 6 disabled
> > 7 disabled
> > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> > original variable MTRRs
> > reg 0, base: 0GB, range: 2GB, type WB
> > reg 1, base: 2GB, range: 1GB, type WB
> > reg 2, base: 3GB, range: 512MB, type WB
> > reg 3, base: 3520MB, range: 64MB, type UC
> > reg 4, base: 4GB, range: 512MB, type WB
> > reg 5, base: 4544MB, range: 64MB, type UC
> > total RAM covered: 3968M
> > Found optimal setting for mtrr clean up
> > gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
> > New variable MTRRs
> > reg 0, base: 0GB, range: 2GB, type WB
> > reg 1, base: 2GB, range: 1GB, type WB
> > reg 2, base: 3GB, range: 512MB, type WB
> > reg 3, base: 3520MB, range: 64MB, type UC
> > reg 4, base: 4GB, range: 512MB, type WB
> > reg 5, base: 4544MB, range: 64MB, type UC
> > e820 update range: 00000000dc000000 - 0000000100000000 (usable) ==> (reserved)
> > last_pfn = 0xdb65f max_arch_pfn = 0x400000000
> > found SMP MP-table at [ffff8800000f2280] f2280
> > initial memory mapped : 0 - 20000000
> > init_memory_mapping: 0000000000000000-00000000db65f000
> > 0000000000 - 00db600000 page 2M
> > 00db600000 - 00db65f000 page 4k
> > kernel direct mapping tables up to db65f000 @ 1fffa000-20000000
> > init_memory_mapping: 0000000100000000-000000011c000000
> > 0100000000 - 011c000000 page 2M
> > kernel direct mapping tables up to 11c000000 @ db659000-db65f000
> > RAMDISK: 373a7000 - 37ff0000
> > ACPI: RSDP 00000000000fe300 00024 (v02 DELL )
> > ACPI: XSDT 00000000db67de18 0005C (v01 DELL E2 06222004 MSFT 00010013)
> > ACPI: FACP 00000000db75fc18 000F4 (v04 DELL E2 06222004 MSFT 00010013)
> > ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20101013/tbfadt-369)
> > ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDB76BF40/0x00000000DB76ED40, using 32 (20101013/tbfadt-486)
> > ACPI: DSDT 00000000db750018 09760 (v01 DELL E2 00001001 INTL 20080729)
> > ACPI: FACS 00000000db76bf40 00040
> > ACPI: APIC 00000000db67cf18 0008C (v02 DELL E2 06222004 MSFT 00010013)
> > ACPI: MCFG 00000000db76dd18 0003C (v01 A M I GMCH945. 06222004 MSFT 00000097)
> > ACPI: HPET 00000000db76dc98 00038 (v01 DELL E2 00000001 ASL 00000061)
> > ACPI: BOOT 00000000db76dc18 00028 (v01 DELL E2 06222004 AMI 00010013)
> > ACPI: SLIC 00000000db766818 00176 (v03 DELL E2 06222004 MSFT 00010013)
> > ACPI: SSDT 00000000db75e018 009F1 (v01 PmRef CpuPm 00003000 INTL 20080729)
> > ACPI: Local APIC address 0xfee00000
> > No NUMA configuration found
> > Faking a node at 0000000000000000-000000011c000000
> > Initmem setup node 0 0000000000000000-000000011c000000
> > NODE_DATA [000000011bfec000 - 000000011bffffff]
> > [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880117e00000-ffff88011b7fffff] on node 0
> > Zone PFN ranges:
> > DMA 0x00000010 -> 0x00001000
> > DMA32 0x00001000 -> 0x00100000
> > Normal 0x00100000 -> 0x0011c000
> > Movable zone start PFN for each node
> > early_node_map[3] active PFN ranges
> > 0: 0x00000010 -> 0x0000009a
> > 0: 0x00000100 -> 0x000db65f
> > 0: 0x00100000 -> 0x0011c000
> > On node 0 totalpages: 1013225
> > DMA zone: 56 pages used for memmap
> > DMA zone: 6 pages reserved
> > DMA zone: 3916 pages, LIFO batch:0
> > DMA32 zone: 14280 pages used for memmap
> > DMA32 zone: 880279 pages, LIFO batch:31
> > Normal zone: 1568 pages used for memmap
> > Normal zone: 113120 pages, LIFO batch:31
> > ACPI: PM-Timer IO Port: 0x408
> > ACPI: Local APIC address 0xfee00000
> > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
> > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
> > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
> > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
> > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
> > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
> > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
> > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> > ACPI: IRQ0 used by override.
> > ACPI: IRQ2 used by override.
> > ACPI: IRQ9 used by override.
> > Using ACPI (MADT) for SMP configuration information
> > ACPI: HPET id: 0x8086a701 base: 0xfed00000
> > SMP: Allowing 8 CPUs, 4 hotplug CPUs
> > nr_irqs_gsi: 40
> > PM: Registered nosave memory: 000000000009a000 - 000000000009b000
> > PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
> > PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> > PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> > PM: Registered nosave memory: 00000000db65f000 - 00000000db67f000
> > PM: Registered nosave memory: 00000000db67f000 - 00000000db76f000
> > PM: Registered nosave memory: 00000000db76f000 - 00000000dc000000
> > PM: Registered nosave memory: 00000000dc000000 - 00000000dde00000
> > PM: Registered nosave memory: 00000000dde00000 - 00000000e0000000
> > PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
> > PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
> > PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
> > PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
> > PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
> > PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
> > PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
> > PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
> > PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
> > PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
> > PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
> > PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
> > PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
> > PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
> > Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
> > Booting paravirtualized kernel on bare hardware
> > setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
> > PERCPU: Embedded 28 pages/cpu @ffff8800db400000 s82752 r8192 d23744 u262144
> > pcpu-alloc: s82752 r8192 d23744 u262144 alloc=1*2097152
> > pcpu-alloc: [0] 0 1 2 3 4 5 6 7
> > Built 1 zonelists in Node order, mobility grouping on. Total pages: 997315
> > Policy zone: Normal
> > Kernel command line: ro root=/dev/mapper/vg_gavana-lv_root rd_LVM_LV=vg_gavana/lv_root rd_LVM_LV=vg_gavana/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet
> > PID hash table entries: 4096 (order: 3, 32768 bytes)
> > Checking aperture...
> > No AGP bridge found
> > Calgary: detecting Calgary via BIOS EBDA area
> > Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> > Memory: 3899920k/4653056k available (4454k kernel code, 600156k absent, 152980k reserved, 7041k data, 924k init)
> > SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
> > Hierarchical RCU implementation.
> > RCU dyntick-idle grace-period acceleration is enabled.
> > RCU-based detection of stalled CPUs is disabled.
> > NR_IRQS:16640 nr_irqs:744 16
> > Extended CMOS year: 2000
> > Console: colour VGA+ 80x25
> > console [tty0] enabled
> > allocated 41943040 bytes of page_cgroup
> > please try 'cgroup_disable=memory' option if you don't want memory cgroups
> > hpet clockevent registered
> > Fast TSC calibration using PIT
> > spurious 8259A interrupt: IRQ7.
> > Detected 2526.928 MHz processor.
> > Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.85 BogoMIPS (lpj=2526928)
> > pid_max: default: 32768 minimum: 301
> > Security Framework initialized
> > SELinux: Initializing.
> > SELinux: Starting in permissive mode
> > Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
> > Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
> > Mount-cache hash table entries: 256
> > Initializing cgroup subsys ns
> > ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
> > Initializing cgroup subsys cpuacct
> > Initializing cgroup subsys memory
> > Initializing cgroup subsys devices
> > Initializing cgroup subsys freezer
> > Initializing cgroup subsys blkio
> > CPU: Physical Processor ID: 0
> > CPU: Processor Core ID: 0
> > mce: CPU supports 9 MCE banks
> > CPU0: Thermal monitoring handled by SMI
> > using mwait in idle threads.
> > Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
> > ... version: 3
> > ... bit width: 48
> > ... generic registers: 4
> > ... value mask: 0000ffffffffffff
> > ... max period: 000000007fffffff
> > ... fixed-purpose events: 3
> > ... event mask: 000000070000000f
> > ACPI: Core revision 20101013
> > ftrace: allocating 21006 entries in 83 pages
> > Setting APIC routing to flat
> > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
> > CPU0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz stepping 02
> > Booting Node 0, Processors #1
> > CPU1: Thermal monitoring handled by SMI
> > #2
> > CPU2: Thermal monitoring handled by SMI
> > #3
> > CPU3: Thermal monitoring handled by SMI
> > Brought up 4 CPUs
> > Total of 4 processors activated (20215.06 BogoMIPS).
> > devtmpfs: initialized
> > Time: 19:04:46 Date: 12/15/10
> > NET: Registered protocol family 16
> > ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> > ACPI: bus type pci registered
> > PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> > PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
> > PCI: Using configuration type 1 for base access
> > bio: create slab <bio-0> at 0
> > ACPI: EC: Look up EC in DSDT
> > [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> > [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
> > ACPI: SSDT 00000000db7ea918 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20080729)
> > ACPI: Dynamic OEM Table Load:
> > ACPI: SSDT (null) 00432 (v01 PmRef Cpu0Ist 00003000 INTL 20080729)
> > ACPI: SSDT 00000000db7e8018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20080729)
> > ACPI: Dynamic OEM Table Load:
> > ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20080729)
> > ACPI: SSDT 00000000db7e9a98 00303 (v01 PmRef ApIst 00003000 INTL 20080729)
> > ACPI: Dynamic OEM Table Load:
> > ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20080729)
> > ACPI: SSDT 00000000db7e7d98 00119 (v01 PmRef ApCst 00003000 INTL 20080729)
> > ACPI: Dynamic OEM Table Load:
> > ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20080729)
> > ACPI: Interpreter enabled
> > ACPI: (supports S0 S3 S4 S5)
> > ACPI: Using IOAPIC for interrupt routing
> > ACPI: EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
> > ACPI: No dock devices found.
> > PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> > \_SB_.PCI0:_OSC invalid UUID
> > _OSC request data:1 8 1f
> > ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
> > pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
> > pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
> > pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
> > pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
> > pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
> > DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
> > pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
> > pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
> > pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
> > pci 0000:00:02.0: reg 20: [io 0x60b0-0x60b7]
> > pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
> > pci 0000:00:19.0: reg 10: [mem 0xf5400000-0xf541ffff]
> > pci 0000:00:19.0: reg 14: [mem 0xf5480000-0xf5480fff]
> > pci 0000:00:19.0: reg 18: [io 0x6040-0x605f]
> > pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
> > pci 0000:00:19.0: PME# disabled
> > pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
> > pci 0000:00:1a.0: reg 10: [mem 0xf5470000-0xf54703ff]
> > pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
> > pci 0000:00:1a.0: PME# disabled
> > pci 0000:00:1b.0: [8086:3b57] type 0 class 0x000403
> > pci 0000:00:1b.0: reg 10: [mem 0xf5460000-0xf5463fff 64bit]
> > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> > pci 0000:00:1b.0: PME# disabled
> > pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
> > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> > pci 0000:00:1c.0: PME# disabled
> > pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
> > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> > pci 0000:00:1c.1: PME# disabled
> > pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
> > pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> > pci 0000:00:1c.2: PME# disabled
> > pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
> > pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
> > pci 0000:00:1c.3: PME# disabled
> > pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
> > pci 0000:00:1d.0: reg 10: [mem 0xf5450000-0xf54503ff]
> > pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> > pci 0000:00:1d.0: PME# disabled
> > pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
> > pci 0000:00:1f.0: [8086:3b0f] type 0 class 0x000601
> > pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
> > pci 0000:00:1f.2: reg 10: [io 0x6090-0x6097]
> > pci 0000:00:1f.2: reg 14: [io 0x6080-0x6083]
> > pci 0000:00:1f.2: reg 18: [io 0x6070-0x6077]
> > pci 0000:00:1f.2: reg 1c: [io 0x6060-0x6063]
> > pci 0000:00:1f.2: reg 20: [io 0x6020-0x603f]
> > pci 0000:00:1f.2: reg 24: [mem 0xf5440000-0xf54407ff]
> > pci 0000:00:1f.2: PME# supported from D3hot
> > pci 0000:00:1f.2: PME# disabled
> > pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
> > pci 0000:00:1f.3: reg 10: [mem 0xf5430000-0xf54300ff 64bit]
> > pci 0000:00:1f.3: reg 20: [io 0x6000-0x601f]
> > pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
> > pci 0000:00:1f.6: reg 10: [mem 0xf5420000-0xf5420fff 64bit]
> > pci 0000:00:1c.0: PCI bridge to [bus 01-01]
> > pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
> > pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf53fffff]
> > pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> > pci 0000:02:00.0: [8086:422c] type 0 class 0x000280
> > pci 0000:02:00.0: reg 10: [mem 0xf2c00000-0xf2c01fff 64bit]
> > pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
> > pci 0000:02:00.0: PME# disabled
> > pci 0000:00:1c.1: PCI bridge to [bus 02-02]
> > pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
> > pci 0000:00:1c.1: bridge window [mem 0xf2c00000-0xf3ffffff]
> > pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> > pci 0000:03:00.0: [1180:e822] type 0 class 0x000805
> > pci 0000:03:00.0: reg 10: [mem 0xf1830000-0xf18300ff]
> > pci 0000:03:00.0: supports D1 D2
> > pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> > pci 0000:03:00.0: PME# disabled
> > pci 0000:00:1c.2: PCI bridge to [bus 03-03]
> > pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
> > pci 0000:00:1c.2: bridge window [mem 0xf1800000-0xf2bfffff]
> > pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> > pci 0000:00:1c.3: PCI bridge to [bus 04-09]
> > pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
> > pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf17fffff]
> > pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> > pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
> > pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
> > pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
> > pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
> > pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> > pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> > pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> > pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
> > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
> > \_SB_.PCI0:_OSC invalid UUID
> > _OSC request data:1 19 1f
> > ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
> > pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
> > pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
> > pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
> > pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
> > pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
> > pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
> > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
> > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> > ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
> > ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> > ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
> > ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
> > vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> > vgaarb: loaded
> > SCSI subsystem initialized
> > libata version 3.00 loaded.
> > usbcore: registered new interface driver usbfs
> > usbcore: registered new interface driver hub
> > usbcore: registered new device driver usb
> > PCI: Using ACPI for IRQ routing
> > PCI: pci_cache_line_size set to 64 bytes
> > reserve RAM buffer: 000000000009ac00 - 000000000009ffff
> > reserve RAM buffer: 00000000db65f000 - 00000000dbffffff
> > NetLabel: Initializing
> > NetLabel: domain hash size = 128
> > NetLabel: protocols = UNLABELED CIPSOv4
> > NetLabel: unlabeled traffic allowed by default
> > hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> > hpet0: 8 comparators, 64-bit 14.318180 MHz counter
> > Switching to clocksource tsc
> > pnp: PnP ACPI init
> > ACPI: bus type pnp registered
> > pnp 00:00: [bus 00-3e]
> > pnp 00:00: [io 0x0000-0x0cf7 window]
> > pnp 00:00: [io 0x0cf8-0x0cff]
> > pnp 00:00: [io 0x0d00-0xffff window]
> > pnp 00:00: [mem 0x000a0000-0x000bffff window]
> > pnp 00:00: [mem 0x000c0000-0x000c3fff window]
> > pnp 00:00: [mem 0x000c4000-0x000c7fff window]
> > pnp 00:00: [mem 0x000c8000-0x000cbfff window]
> > pnp 00:00: [mem 0x000cc000-0x000cffff window]
> > pnp 00:00: [mem 0x000d0000-0x000d3fff window]
> > pnp 00:00: [mem 0x000d4000-0x000d7fff window]
> > pnp 00:00: [mem 0x000d8000-0x000dbfff window]
> > pnp 00:00: [mem 0x000dc000-0x000dffff window]
> > pnp 00:00: [mem 0x000e0000-0x000e3fff window]
> > pnp 00:00: [mem 0x000e4000-0x000e7fff window]
> > pnp 00:00: [mem 0x000e8000-0x000ebfff window]
> > pnp 00:00: [mem 0x000ec000-0x000effff window]
> > pnp 00:00: [mem 0x000f0000-0x000fffff window]
> > pnp 00:00: [mem 0xe0000000-0xfeafffff window]
> > pnp 00:00: [mem 0xfed40000-0xfed44fff window]
> > pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
> > pnp 00:01: [io 0x0000-0x001f]
> > pnp 00:01: [io 0x0081-0x0091]
> > pnp 00:01: [io 0x0093-0x009f]
> > pnp 00:01: [io 0x00c0-0x00df]
> > pnp 00:01: [dma 4]
> > pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> > pnp 00:02: [mem 0xff000000-0xffffffff]
> > pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
> > pnp 00:03: [mem 0xfed00000-0xfed003ff]
> > pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
> > pnp 00:04: [io 0x00f0]
> > pnp 00:04: [irq 13]
> > pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
> > pnp 00:05: [io 0x002e-0x002f]
> > pnp 00:05: [io 0x004e-0x004f]
> > pnp 00:05: [io 0x0061]
> > pnp 00:05: [io 0x0063]
> > pnp 00:05: [io 0x0065]
> > pnp 00:05: [io 0x0067]
> > pnp 00:05: [io 0x0070]
> > pnp 00:05: [io 0x0080]
> > pnp 00:05: [io 0x0092]
> > pnp 00:05: [io 0x00b2-0x00b3]
> > pnp 00:05: [io 0x0680-0x069f]
> > pnp 00:05: [io 0x1000-0x1003]
> > pnp 00:05: [io 0x1004-0x1013]
> > pnp 00:05: [io 0xffff]
> > pnp 00:05: [io 0x0400-0x047f]
> > pnp 00:05: [io 0x0500-0x057f]
> > pnp 00:05: [io 0x164e-0x164f]
> > pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
> > pnp 00:06: [io 0x0070-0x0077]
> > pnp 00:06: [irq 8]
> > pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> > pnp 00:07: [io 0x0060]
> > pnp 00:07: [io 0x0064]
> > pnp 00:07: [irq 1]
> > pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
> > pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (disabled)
> > pnp 00:09: [irq 12]
> > pnp 00:09: Plug and Play ACPI device, IDs DLL0410 PNP0f13 (active)
> > pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
> > pnp 00:0a: [mem 0xfed10000-0xfed13fff]
> > pnp 00:0a: [mem 0xfed18000-0xfed18fff]
> > pnp 00:0a: [mem 0xfed19000-0xfed19fff]
> > pnp 00:0a: [mem 0xf8000000-0xfbffffff]
> > pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
> > pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
> > pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
> > pnp 00:0a: [mem 0xff000000-0xffffffff]
> > pnp 00:0a: [mem 0xfee00000-0xfeefffff]
> > pnp 00:0a: [mem 0xf54c0000-0xf54c0fff]
> > pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> > pnp 00:0b: [irq 23]
> > pnp 00:0b: Plug and Play ACPI device, IDs SMO8800 (active)
> > pnp 00:0c: [bus 3f]
> > pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active)
> > pnp: PnP ACPI: found 13 devices
> > ACPI: ACPI bus type pnp unregistered
> > system 00:05: [io 0x0680-0x069f] has been reserved
> > system 00:05: [io 0x1000-0x1003] has been reserved
> > system 00:05: [io 0x1004-0x1013] has been reserved
> > system 00:05: [io 0xffff] has been reserved
> > system 00:05: [io 0x0400-0x047f] has been reserved
> > system 00:05: [io 0x0500-0x057f] has been reserved
> > system 00:05: [io 0x164e-0x164f] has been reserved
> > system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
> > system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
> > system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
> > system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
> > system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
> > system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
> > system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
> > system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
> > system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
> > system 00:0a: [mem 0xf54c0000-0xf54c0fff] has been reserved
> > pci 0000:00:1c.0: BAR 15: assigned [mem 0xfe900000-0xfeafffff 64bit pref]
> > pci 0000:00:1c.1: BAR 15: assigned [mem 0xfe700000-0xfe8fffff 64bit pref]
> > pci 0000:00:1c.2: BAR 15: assigned [mem 0xfe500000-0xfe6fffff 64bit pref]
> > pci 0000:00:1c.3: BAR 15: assigned [mem 0xfe300000-0xfe4fffff 64bit pref]
> > pci 0000:00:1c.0: PCI bridge to [bus 01-01]
> > pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
> > pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf53fffff]
> > pci 0000:00:1c.0: bridge window [mem 0xfe900000-0xfeafffff 64bit pref]
> > pci 0000:00:1c.1: PCI bridge to [bus 02-02]
> > pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
> > pci 0000:00:1c.1: bridge window [mem 0xf2c00000-0xf3ffffff]
> > pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe8fffff 64bit pref]
> > pci 0000:00:1c.2: PCI bridge to [bus 03-03]
> > pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
> > pci 0000:00:1c.2: bridge window [mem 0xf1800000-0xf2bfffff]
> > pci 0000:00:1c.2: bridge window [mem 0xfe500000-0xfe6fffff 64bit pref]
> > pci 0000:00:1c.3: PCI bridge to [bus 04-09]
> > pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
> > pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf17fffff]
> > pci 0000:00:1c.3: bridge window [mem 0xfe300000-0xfe4fffff 64bit pref]
> > pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
> > pci 0000:00:1e.0: bridge window [io disabled]
> > pci 0000:00:1e.0: bridge window [mem disabled]
> > pci 0000:00:1e.0: bridge window [mem pref disabled]
> > pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> > pci 0000:00:1c.0: setting latency timer to 64
> > pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> > pci 0000:00:1c.1: setting latency timer to 64
> > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> > pci 0000:00:1c.2: setting latency timer to 64
> > pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
> > pci 0000:00:1c.3: setting latency timer to 64
> > pci 0000:00:1e.0: setting latency timer to 64
> > pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> > pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> > pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> > pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff]
> > pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
> > pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf53fffff]
> > pci_bus 0000:01: resource 2 [mem 0xfe900000-0xfeafffff 64bit pref]
> > pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
> > pci_bus 0000:02: resource 1 [mem 0xf2c00000-0xf3ffffff]
> > pci_bus 0000:02: resource 2 [mem 0xfe700000-0xfe8fffff 64bit pref]
> > pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
> > pci_bus 0000:03: resource 1 [mem 0xf1800000-0xf2bfffff]
> > pci_bus 0000:03: resource 2 [mem 0xfe500000-0xfe6fffff 64bit pref]
> > pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
> > pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf17fffff]
> > pci_bus 0000:04: resource 2 [mem 0xfe300000-0xfe4fffff 64bit pref]
> > pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
> > pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
> > pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
> > pci_bus 0000:0a: resource 7 [mem 0xe0000000-0xfeafffff]
> > NET: Registered protocol family 2
> > IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
> > TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
> > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> > TCP: Hash tables configured (established 524288 bind 65536)
> > TCP reno registered
> > UDP hash table entries: 2048 (order: 4, 65536 bytes)
> > UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
> > NET: Registered protocol family 1
> > pci 0000:00:02.0: Boot video device
> > PCI: CLS 64 bytes, default 64
> > Trying to unpack rootfs image as initramfs...
> > Freeing initrd memory: 12580k freed
> > PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> > Placing 64MB software IO TLB between ffff8800d7400000 - ffff8800db400000
> > software IO TLB at phys 0xd7400000 - 0xdb400000
> > Simple Boot Flag at 0xf1 set to 0x1
> > audit: initializing netlink socket (disabled)
> > type=2000 audit(1292439886.925:1): initialized
> > HugeTLB registered 2 MB page size, pre-allocated 0 pages
> > VFS: Disk quotas dquot_6.5.2
> > Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> > msgmni has been set to 7641
> > SELinux: Registering netfilter hooks
> > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> > io scheduler noop registered
> > io scheduler deadline registered
> > io scheduler cfq registered (default)
> > \_SB_.PCI0:_OSC invalid UUID
> > _OSC request data:1 0 1d
> > \_SB_.PCI0:_OSC invalid UUID
> > _OSC request data:1 0 1d
> > \_SB_.PCI0:_OSC invalid UUID
> > _OSC request data:1 0 1d
> > \_SB_.PCI0:_OSC invalid UUID
> > _OSC request data:1 0 1d
> > pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> > pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> > acpiphp: Slot [1] registered
> > pci-stub: invalid id string ""
> > ACPI: AC Adapter [AC] (off-line)
> > input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
> > ACPI: Lid Switch [LID]
> > input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> > ACPI: Power Button [PBTN]
> > input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
> > ACPI: Sleep Button [SBTN]
> > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
> > ACPI: Power Button [PWRF]
> > ACPI: acpi_idle registered with cpuidle
> > Monitor-Mwait will be used to enter C-1 state
> > Monitor-Mwait will be used to enter C-2 state
> > Monitor-Mwait will be used to enter C-3 state
> > Non-volatile memory driver v1.3
> > Linux agpgart interface v0.103
> > agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
> > agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
> > agpgart-intel 0000:00:00.0: detected 32768K stolen memory
> > ACPI: Battery Slot [BAT0] (battery present)
> > agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
> > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> > ACPI: Battery Slot [BAT1] (battery absent)
> > brd: module loaded
> > loop: module loaded
> > ahci 0000:00:1f.2: version 3.0
> > ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> > ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
> > ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
> > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
> > ahci 0000:00:1f.2: setting latency timer to 64
> > scsi0 : ahci
> > scsi1 : ahci
> > scsi2 : ahci
> > scsi3 : ahci
> > scsi4 : ahci
> > scsi5 : ahci
> > ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 40
> > ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 40
> > ata3: DUMMY
> > ata4: DUMMY
> > ata5: SATA max UDMA/133 abar m2048@...5440000 port 0xf5440300 irq 40
> > ata6: SATA max UDMA/133 abar m2048@...5440000 port 0xf5440380 irq 40
> > Fixed MDIO Bus: probed
> > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> > ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> > ehci_hcd 0000:00:1a.0: setting latency timer to 64
> > ehci_hcd 0000:00:1a.0: EHCI Host Controller
> > ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
> > ehci_hcd 0000:00:1a.0: debug port 2
> > ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
> > ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5470000
> > ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
> > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > usb usb1: Product: EHCI Host Controller
> > usb usb1: Manufacturer: Linux 2.6.37-rc5-mainline+ ehci_hcd
> > usb usb1: SerialNumber: 0000:00:1a.0
> > hub 1-0:1.0: USB hub found
> > hub 1-0:1.0: 3 ports detected
> > ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> > ehci_hcd 0000:00:1d.0: setting latency timer to 64
> > ehci_hcd 0000:00:1d.0: EHCI Host Controller
> > ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> > ehci_hcd 0000:00:1d.0: debug port 2
> > ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
> > ehci_hcd 0000:00:1d.0: irq 17, io mem 0xf5450000
> > ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
> > usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> > usb usb2: Product: EHCI Host Controller
> > usb usb2: Manufacturer: Linux 2.6.37-rc5-mainline+ ehci_hcd
> > usb usb2: SerialNumber: 0000:00:1d.0
> > hub 2-0:1.0: USB hub found
> > hub 2-0:1.0: 3 ports detected
> > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> > uhci_hcd: USB Universal Host Controller Interface driver
> > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> > i8042.c: Warning: Keylock active.
> > serio: i8042 KBD port at 0x60,0x64 irq 1
> > serio: i8042 AUX port at 0x60,0x64 irq 12
> > mice: PS/2 mouse device common for all mice
> > rtc_cmos 00:06: RTC can wake from S4
> > rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> > rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
> > device-mapper: uevent: version 1.0.3
> > device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@...hat.com
> > cpuidle: using governor ladder
> > cpuidle: using governor menu
> > input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
> > usbcore: registered new interface driver usbhid
> > usbhid: USB HID core driver
> > nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> > ip_tables: (C) 2000-2006 Netfilter Core Team
> > TCP cubic registered
> > Initializing XFRM netlink socket
> > NET: Registered protocol family 17
> > Registering the dns_resolver key type
> > PM: Hibernation image not present or could not be loaded.
> > IMA: No TPM chip found, activating TPM-bypass!
> > Magic number: 6:692:91
> > rtc_cmos 00:06: setting system clock to 2010-12-15 19:04:47 UTC (1292439887)
> > Initalizing network drop monitor service
> > ata6: SATA link down (SStatus 0 SControl 300)
> > ata5: SATA link down (SStatus 0 SControl 300)
> > usb 1-1: new high speed USB device using ehci_hcd and address 2
> > ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > ata2.00: ATAPI: MATSHITA DVD+/-RW UJ892, 1.04, max UDMA/100
> > ata1.00: ATA-7: SAMSUNG SSD PM800 2.5" 256GB, VBM24D1Q, max UDMA/100
> > ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> > ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
> > ata1.00: configured for UDMA/100
> > scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM80 VBM2 PQ: 0 ANSI: 5
> > sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
> > sd 0:0:0:0: Attached scsi generic sg0 type 0
> > sd 0:0:0:0: [sda] Write Protect is off
> > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> > ata2.00: configured for UDMA/100
> > sda: sda1 sda2
> > sd 0:0:0:0: [sda] Attached SCSI disk
> > usb 1-1: New USB device found, idVendor=8087, idProduct=0020
> > usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> > hub 1-1:1.0: USB hub found
> > scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ892 1.04 PQ: 0 ANSI: 5
> > hub 1-1:1.0: 6 ports detected
> > sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> > cdrom: Uniform CD-ROM driver Revision: 3.20
> > sr 1:0:0:0: Attached scsi CD-ROM sr0
> > sr 1:0:0:0: Attached scsi generic sg1 type 5
> > Freeing unused kernel memory: 924k freed
> > Write protecting the kernel read-only data: 10240k
> > Freeing unused kernel memory: 1672k freed
> > Freeing unused kernel memory: 1944k freed
> > dracut: dracut-005-5.fc13
> > dracut: rd_NO_LUKS: removing cryptoluks activation
> > udev: starting version 153
> > udevd (104): /proc/104/oom_adj is deprecated, please use /proc/104/oom_score_adj instead.
> > usb 2-1: new high speed USB device using ehci_hcd and address 2
> > [drm] Initialized drm 1.1.0 20060810
> > i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> > i915 0000:00:02.0: setting latency timer to 64
> > usb 2-1: New USB device found, idVendor=8087, idProduct=0020
> > usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> > hub 2-1:1.0: USB hub found
> > hub 2-1:1.0: 8 ports detected
> > i915 0000:00:02.0: irq 41 for MSI/MSI-X
> > vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> > fbcon: inteldrmfb (fb0) is primary device
> > usb 1-1.4: new high speed USB device using ehci_hcd and address 3
> > [drm:ironlake_crtc_enable] *ERROR* failed to enable transcoder 0
> > Console: switching to colour frame buffer device 170x48
> > fb0: inteldrmfb frame buffer device
> > drm: registered panic notifier
> > usb 1-1.4: New USB device found, idVendor=0461, idProduct=4db1
> > usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > usb 1-1.4: Product: Laptop_Integrated_Webcam_2M
> > usb 1-1.4: Manufacturer: CN0F5CWW7866406901WQA00
> > usb 2-1.8: new full speed USB device using ehci_hcd and address 3
> > usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800
> > usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> > usb 2-1.8: Product: 5880
> > usb 2-1.8: Manufacturer: Broadcom Corp
> > usb 2-1.8: SerialNumber: 0123456789ABCD
> > usb 2-1.8: config 0 descriptor??
> > ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20101013/evregion-474)
> > ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880113653be0), AE_TIME (20101013/psparse-537)
> > ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR2] (Node ffff880113653c08), AE_TIME (20101013/psparse-537)
> > ACPI Error: Method parse/execution failed [\ECRW] (Node ffff880113653d70), AE_TIME (20101013/psparse-537)
> > ACPI Error: Method parse/execution failed [\ECG1] (Node ffff880113653dc0), AE_TIME (20101013/psparse-537)
> > ACPI Error: Method parse/execution failed [\NEVT] (Node ffff880113655140), AE_TIME (20101013/psparse-537)
> > ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV._Q66] (Node ffff880113653bb8), AE_TIME (20101013/psparse-537)
> > acpi device:38: registered as cooling_device4
> > input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
> > ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
> > [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> > input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input6
> > dracut: Starting plymouth daemon
> > sdhci: Secure Digital Host Controller Interface driver
> > sdhci: Copyright(c) Pierre Ossman
> > sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 1)
> > sdhci-pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> > sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
> > sdhci-pci 0000:03:00.0: setting latency timer to 64
> > Registered led device: mmc0::
> > mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
> > dracut: Scanning devices sda2 for LVM logical volumes vg_gavana/lv_root vg_gavana/lv_swap
> > dracut: inactive '/dev/vg_gavana/lv_root' [50.00 GiB] inherit
> > dracut: inactive '/dev/vg_gavana/lv_home' [182.22 GiB] inherit
> > dracut: inactive '/dev/vg_gavana/lv_swap' [5.75 GiB] inherit
> > EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
> > dracut: Mounted root filesystem /dev/mapper/vg_gavana-lv_root
> > dracut: Loading SELinux policy
> > type=1404 audit(1292439892.295:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
> > SELinux: 2048 avtab hash slots, 205638 rules.
> > SELinux: 2048 avtab hash slots, 205638 rules.
> > SELinux: 9 users, 13 roles, 3365 types, 175 bools, 1 sens, 1024 cats
> > SELinux: 77 classes, 205638 rules
> > SELinux: Permission read_policy in class security not defined in policy.
> > SELinux: Permission audit_access in class file not defined in policy.
> > SELinux: Permission audit_access in class dir not defined in policy.
> > SELinux: Permission execmod in class dir not defined in policy.
> > SELinux: Permission audit_access in class lnk_file not defined in policy.
> > SELinux: Permission open in class lnk_file not defined in policy.
> > SELinux: Permission execmod in class lnk_file not defined in policy.
> > SELinux: Permission audit_access in class chr_file not defined in policy.
> > SELinux: Permission audit_access in class blk_file not defined in policy.
> > SELinux: Permission execmod in class blk_file not defined in policy.
> > SELinux: Permission audit_access in class sock_file not defined in policy.
> > SELinux: Permission execmod in class sock_file not defined in policy.
> > SELinux: Permission audit_access in class fifo_file not defined in policy.
> > SELinux: Permission execmod in class fifo_file not defined in policy.
> > SELinux: the above unknown classes and permissions will be allowed
> > SELinux: Completing initialization.
> > SELinux: Setting up existing superblocks.
> > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> > SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> > SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> > SELinux: initialized (dev proc, type proc), uses genfs_contexts
> > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
> > SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> > SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> > SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> > SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
> > SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> > SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> > SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> > SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> > SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
> > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> > SELinux: initialized (dev dm-0, type ext4), uses xattr
> > type=1403 audit(1292439892.882:3): policy loaded auid=4294967295 ses=4294967295
> > dracut:
> > dracut: Switching root
> > readahead: starting
> > udev: starting version 153
> > type=1400 audit(1292439894.129:4): avc: denied { mmap_zero } for pid=412 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
> > iTCO_vendor_support: vendor-support=0
> > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
> > iTCO_wdt: Found a QS57 TCO device (Version=2, TCOBASE=0x0460)
> > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> > input: PC Speaker as /devices/platform/pcspkr/input/input7
> > i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> > ACPI: resource 0000:00:1f.3 [io 0x6000-0x601f] conflicts with ACPI region SMBI [mem 0x00006000-0x0000600f disabled]
> > ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
> > wmi: Mapper loaded
> > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> > dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
> > microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
> > e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
> > e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
> > e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> > e1000e 0000:00:19.0: setting latency timer to 64
> > e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
> > input: Dell WMI hotkeys as /devices/virtual/input/input8
> > microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
> > microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
> > microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
> > microcode: Microcode Update Driver: v2.00 <tigran@...azian.fsnet.co.uk>, Peter Oruba
> > cfg80211: Calling CRDA to update world regulatory domain
> > microcode: CPU0 updated to revision 0xc, date = 2010-06-10
> > microcode: CPU1 updated to revision 0xc, date = 2010-06-10
> > microcode: CPU2 updated to revision 0xc, date = 2010-06-10
> > microcode: CPU3 updated to revision 0xc, date = 2010-06-10
> > e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:b9:e0:54:fd
> > e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
> > e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 4041ff-0ff
> > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> > HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
> > HDA Intel 0000:00:1b.0: setting latency timer to 64
> > ALSA sound/pci/hda/hda_codec.c:4619: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0)
> > ALSA sound/pci/hda/hda_codec.c:4623: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
> > ALSA sound/pci/hda/hda_codec.c:4627: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
> > ALSA sound/pci/hda/hda_codec.c:4628: mono: mono_out=0x0
> > ALSA sound/pci/hda/hda_codec.c:4632: inputs:
> > ALSA sound/pci/hda/hda_codec.c:4638:
> > ALSA sound/pci/hda/patch_sigmatel.c:3042: stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)
> > cfg80211: World regulatory domain updated:
> > (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> > (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> > (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> > (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
> > (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> > (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
> > input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
> > input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> > input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> > input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> > iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
> > iwlagn: Copyright(c) 2003-2010 Intel Corporation
> > iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> > iwlagn 0000:02:00.0: setting latency timer to 64
> > iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
> > iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
> > iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
> > iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X
> > iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532
> > cfg80211: Calling CRDA for country: RU
> > ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
> > cfg80211: Regulatory domain changed to country: RU
> > (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
> > (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
> > (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
> > EXT4-fs (dm-0): re-mounted. Opts: (null)
> > EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
> > SELinux: initialized (dev sda1, type ext4), uses xattr
> > EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
> > SELinux: initialized (dev dm-2, type ext4), uses xattr
> > Adding 6029308k swap on /dev/mapper/vg_gavana-lv_swap. Priority:-1 extents:1 across:6029308k
> > SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
> > NET: Registered protocol family 10
> > lo: Disabled Privacy Extensions
> > ip6_tables: (C) 2000-2006 Netfilter Core Team
> > e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
> > e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
> > ADDRCONF(NETDEV_UP): eth0: link is not ready
> > RPC: Registered udp transport module.
> > RPC: Registered tcp transport module.
> > RPC: Registered tcp NFSv4.1 backchannel transport module.
> > SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
> > fuse init (API version 7.15)
> > SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
> > wmi: Mapper unloaded
> > iwlagn 0000:02:00.0: PCI INT A disabled
> > iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
> > iwlagn: Copyright(c) 2003-2010 Intel Corporation
> > iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> > iwlagn 0000:02:00.0: setting latency timer to 64
> > iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
> > iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
> > iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
> > iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X
> > iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532
> > ieee80211 phy1: Selected rate control algorithm 'iwl-agn-rs'
> > iwlagn 0000:02:00.0: PCI INT A disabled
> > iwlcore: Unknown parameter `debug'
> > iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
> > iwlagn: Copyright(c) 2003-2010 Intel Corporation
> > ieee80211 phy2: U iwl_pci_probe *** LOAD DRIVER ***
> > iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> > iwlagn 0000:02:00.0: setting latency timer to 64
> > ieee80211 phy2: U iwl_pci_probe pci_resource_len = 0x00002000
> > ieee80211 phy2: U iwl_pci_probe pci_resource_base = ffffc90005b14000
> > ieee80211 phy2: U iwl_hw_detect HW Revision ID = 0x35
> > iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
> > ieee80211 phy2: U iwl_prepare_card_hw iwl_prepare_card_hw enter
> > ieee80211 phy2: U iwl_set_hw_ready hardware ready
> > ieee80211 phy2: U iwl_eeprom_init NVM size = 2048
> > ieee80211 phy2: U iwl_apm_init Init card's basic functions
> > ieee80211 phy2: U iwl_eeprom_verify_signature EEPROM signature=0x00000001
> > ieee80211 phy2: U iwl_eeprom_init NVM Type: OTP, version: 0x436
> > ieee80211 phy2: U iwl_apm_stop Stop card, put in low power state
> > ieee80211 phy2: U iwl_apm_stop_master stop master
> > iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
> > ieee80211 phy2: U iwl_pci_probe MAC address: 00:27:10:46:ad:04
> > ieee80211 phy2: U iwlagn_set_rxon_chain rx_chain=0x240C active=2 idle=1
> > ieee80211 phy2: U iwl_init_channel_map Initializing regulatory info from EEPROM
> > ieee80211 phy2: U iwl_init_channel_map Parsing data for 56 channels.
> > ieee80211 phy2: U iwl_init_channel_map Ch. 1 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 2 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 3 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 4 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 5 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 6 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 7 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 8 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 9 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 10 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 11 [2.4GHz] VALID IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 12 [2.4GHz] VALID WIDE (0x61 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 13 [2.4GHz] VALID WIDE (0x61 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 14 Flags 0 [2.4GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 183 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 184 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 185 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 187 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 188 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 189 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 192 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 196 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 7 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 8 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 11 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 12 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 16 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 34 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 36 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 38 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 40 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 42 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 44 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 46 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 48 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 52 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 56 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 60 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 64 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 100 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 104 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 108 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 112 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 116 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 120 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 124 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 128 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 132 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 136 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 140 [5.2GHz] VALID RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 145 Flags 0 [5.2GHz] - No traffic
> > ieee80211 phy2: U iwl_init_channel_map Ch. 149 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 153 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 157 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 161 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_init_channel_map Ch. 165 [5.2GHz] VALID WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 1 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 2 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 3 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 4 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 8 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 5 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 9 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 6 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 10 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 36 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 40 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 44 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 48 [5.2GHz] WIDE DFS (0xe1 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 52 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 56 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 60 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 64 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 100 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 104 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 108 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 112 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 116 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 120 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 124 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 128 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 132 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 136 [5.2GHz] RADAR WIDE (0x31 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 149 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 153 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 157 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_mod_ht40_chan_info HT40 Ch. 161 [5.2GHz] WIDE (0x61 0dBm): Ad-Hoc not supported
> > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 0 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 15 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 14 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 13 dB chain_c: 12 dB mimo2: 0 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 13 dB chain_c: 12 dB mimo2: 11 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 0 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 3 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 4 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 0 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 5 - chain_a: 0 dB chain_b: 15 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 6 - chain_a: 0 dB chain_b: 14 dB chain_c: 13 dB mimo2: 0 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 7 - chain_a: 0 dB chain_b: 13 dB chain_c: 12 dB mimo2: 11 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 9 dB chain_c: 9 dB mimo2: 8 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 11 dB chain_c: 11 dB mimo2: 9 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 11 dB chain_c: 11 dB mimo2: 9 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 3 - chain_a: 0 dB chain_b: 9 dB chain_c: 10 dB mimo2: 8 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 4 - chain_a: 0 dB chain_b: 14 dB chain_c: 13 dB mimo2: 11 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 15 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 15 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 3 - chain_a: 0 dB chain_b: 13 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 4 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 5 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 10 dB chain_c: 10 dB mimo2: 9 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 11 dB chain_c: 11 dB mimo2: 10 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 2 - chain_a: 0 dB chain_b: 13 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 13 dB chain_c: 13 dB mimo2: 0 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 14 dB chain_c: 13 dB mimo2: 11 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 0 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 12 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 0 - chain_a: 0 dB chain_b: 13 dB chain_c: 15 dB mimo2: 12 dB mimo3: 0 dB
> > ieee80211 phy2: U iwl_get_max_txpower_avg 1 - chain_a: 0 dB chain_b: 14 dB chain_c: 14 dB mimo2: 11 dB mimo3: 0 dB
> > ieee80211 phy2: U iwlcore_init_geos Channel 1 Freq=2412[2.4GHz] valid flag=0x20
> > ieee80211 phy2: U iwlcore_init_geos Channel 2 Freq=2417[2.4GHz] valid flag=0x20
> > ieee80211 phy2: U iwlcore_init_geos Channel 3 Freq=2422[2.4GHz] valid flag=0x20
> > ieee80211 phy2: U iwlcore_init_geos Channel 4 Freq=2427[2.4GHz] valid flag=0x20
> > ieee80211 phy2: U iwlcore_init_geos Channel 5 Freq=2432[2.4GHz] valid flag=0x0
> > ieee80211 phy2: U iwlcore_init_geos Channel 6 Freq=2437[2.4GHz] valid flag=0x0
> > ieee80211 phy2: U iwlcore_init_geos Channel 7 Freq=2442[2.4GHz] valid flag=0x0
> > ieee80211 phy2: U iwlcore_init_geos Channel 8 Freq=2447[2.4GHz] valid flag=0x10
> > ieee80211 phy2: U iwlcore_init_geos Channel 9 Freq=2452[2.4GHz] valid flag=0x10
> > ieee80211 phy2: U iwlcore_init_geos Channel 10 Freq=2457[2.4GHz] valid flag=0x10
> > ieee80211 phy2: U iwlcore_init_geos Channel 11 Freq=2462[2.4GHz] valid flag=0x10
> > ieee80211 phy2: U iwlcore_init_geos Channel 12 Freq=2467[2.4GHz] valid flag=0x36
> > ieee80211 phy2: U iwlcore_init_geos Channel 13 Freq=2472[2.4GHz] valid flag=0x36
> > ieee80211 phy2: U iwlcore_init_geos Channel 36 Freq=5180[5.2GHz] valid flag=0x26
> > ieee80211 phy2: U iwlcore_init_geos Channel 40 Freq=5200[5.2GHz] valid flag=0x16
> > ieee80211 phy2: U iwlcore_init_geos Channel 44 Freq=5220[5.2GHz] valid flag=0x26
> > ieee80211 phy2: U iwlcore_init_geos Channel 48 Freq=5240[5.2GHz] valid flag=0x16
> > ieee80211 phy2: U iwlcore_init_geos Channel 52 Freq=5260[5.2GHz] valid flag=0x2E
> > ieee80211 phy2: U iwlcore_init_geos Channel 56 Freq=5280[5.2GHz] valid flag=0x1E
> > ieee80211 phy2: U iwlcore_init_geos Channel 60 Freq=5300[5.2GHz] valid flag=0x2E
> > ieee80211 phy2: U iwlcore_init_geos Channel 64 Freq=5320[5.2GHz] valid flag=0x1E
> > ieee80211 phy2: U iwlcore_init_geos Channel 100 Freq=5500[5.2GHz] valid flag=0x2E
> > ieee80211 phy2: U iwlcore_init_geos Channel 104 Freq=5520[5.2GHz] valid flag=0x1E
> > ieee80211 phy2: U iwlcore_init_geos Channel 108 Freq=5540[5.2GHz] valid flag=0x2E
> > ieee80211 phy2: U iwlcore_init_geos Channel 112 Freq=5560[5.2GHz] valid flag=0x1E
> > ieee80211 phy2: U iwlcore_init_geos Channel 116 Freq=5580[5.2GHz] valid flag=0x2E
> > ieee80211 phy2: U iwlcore_init_geos Channel 120 Freq=5600[5.2GHz] valid flag=0x1E
> > ieee80211 phy2: U iwlcore_init_geos Channel 124 Freq=5620[5.2GHz] valid flag=0x2E
> > ieee80211 phy2: U iwlcore_init_geos Channel 128 Freq=5640[5.2GHz] valid flag=0x1E
> > ieee80211 phy2: U iwlcore_init_geos Channel 132 Freq=5660[5.2GHz] valid flag=0x2E
> > ieee80211 phy2: U iwlcore_init_geos Channel 136 Freq=5680[5.2GHz] valid flag=0x1E
> > ieee80211 phy2: U iwlcore_init_geos Channel 140 Freq=5700[5.2GHz] valid flag=0x3E
> > ieee80211 phy2: U iwlcore_init_geos Channel 149 Freq=5745[5.2GHz] valid flag=0x26
> > ieee80211 phy2: U iwlcore_init_geos Channel 153 Freq=5765[5.2GHz] valid flag=0x16
> > ieee80211 phy2: U iwlcore_init_geos Channel 157 Freq=5785[5.2GHz] valid flag=0x26
> > ieee80211 phy2: U iwlcore_init_geos Channel 161 Freq=5805[5.2GHz] valid flag=0x16
> > ieee80211 phy2: U iwlcore_init_geos Channel 165 Freq=5825[5.2GHz] valid flag=0x36
> > iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
> > iwlagn 0000:02:00.0: irq 44 for MSI/MSI-X
> > ieee80211 phy2: U iwl_request_firmware attempting to load firmware 'iwlwifi-6000-4.ucode'
> > ieee80211 phy2: U iwl_ucode_callback Loaded firmware file 'iwlwifi-6000-4.ucode' (454608 bytes).
> > iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532
> > ieee80211 phy2: U iwl_ucode_callback f/w package hdr ucode version raw = 0x9dd0401
> > ieee80211 phy2: U iwl_ucode_callback f/w package hdr runtime inst size = 145616
> > ieee80211 phy2: U iwl_ucode_callback f/w package hdr runtime data size = 81920
> > ieee80211 phy2: U iwl_ucode_callback f/w package hdr init inst size = 145124
> > ieee80211 phy2: U iwl_ucode_callback f/w package hdr init data size = 81920
> > ieee80211 phy2: U iwl_ucode_callback f/w package hdr boot inst size = 0
> > ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) uCode instr len 145616
> > ieee80211 phy2: U iwl_ucode_callback uCode instr buf vaddr = 0xffff8800c91c0000, paddr = 0xc91c0000
> > ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) uCode data len 81920
> > ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) init instr len 145124
> > ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) init data len 81920
> > ieee80211 phy2: U iwl_ucode_callback Copying (but not loading) boot instr len 0
> > ieee80211 phy2: Selected rate control algorithm 'iwl-agn-rs'
> > 4: phy2: Wireless LAN
> > Soft blocked: no
> > Hard blocked: yes
>
> > 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
> > Subsystem: Dell Device 0410
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
> > Latency: 0
> > Capabilities: [e0] Vendor Specific Information: Len=0c <?>
> >
> > 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
> > Subsystem: Dell Device 0410
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Interrupt: pin A routed to IRQ 11
> > Region 0: Memory at f0000000 (64-bit, non-prefetchable)
> > Region 2: Memory at e0000000 (64-bit, prefetchable)
> > Region 4: I/O ports at 60b0
> > Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
> > Address: fee0500c Data: 4169
> > Capabilities: [d0] Power Management version 2
> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > Capabilities: [a4] PCI Advanced Features
> > AFCap: TP+ FLR+
> > AFCtrl: FLR-
> > AFStatus: TP-
> > Kernel modules: i915
> >
> > 00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 05)
> > Subsystem: Dell Device 0410
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Interrupt: pin A routed to IRQ 5
> > Region 0: Memory at f5400000 (32-bit, non-prefetchable)
> > Region 1: Memory at f5480000 (32-bit, non-prefetchable)
> > Region 2: I/O ports at 6040
> > Capabilities: [c8] Power Management version 2
> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> > Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> > Address: 00000000fee0400c Data: 41a1
> > Capabilities: [e0] PCI Advanced Features
> > AFCap: TP+ FLR+
> > AFCtrl: FLR-
> > AFStatus: TP-
> > Kernel modules: e1000e
> >
> > 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
> > Subsystem: Dell Device 0410
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Interrupt: pin A routed to IRQ 11
> > Region 0: Memory at f5470000 (32-bit, non-prefetchable)
> > Capabilities: [50] Power Management version 2
> > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > Capabilities: [58] Debug port: BAR=1 offset=00a0
> > Capabilities: [98] PCI Advanced Features
> > AFCap: TP+ FLR+
> > AFCtrl: FLR-
> > AFStatus: TP-
> >
> > 00:1b.0 Audio device: Intel Corporation Device 3b57 (rev 05)
> > Subsystem: Dell Device 0410
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0, Cache Line Size: 64 bytes
> > Interrupt: pin A routed to IRQ 3
> > Region 0: Memory at f5460000 (64-bit, non-prefetchable)
> > Capabilities: [50] Power Management version 2
> > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
> > Address: 00000000fee0500c Data: 4189
> > Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
> > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> > ExtTag- RBE- FLReset+
> > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> > MaxPayload 128 bytes, MaxReadReq 128 bytes
> > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> > LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
> > ClockPM- Surprise- LLActRep- BwNot-
> > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
> > Kernel modules: snd-hda-intel
> >
> > 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0, Cache Line Size: 64 bytes
> > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> > I/O behind bridge: 00005000-00005fff
> > Memory behind bridge: f4000000-f53fffff
> > Prefetchable memory behind bridge: 00000000fe900000-00000000feafffff
> > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
> > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> > ExtTag- RBE+ FLReset-
> > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> > MaxPayload 128 bytes, MaxReadReq 128 bytes
> > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
> > ClockPM- Surprise- LLActRep+ BwNot-
> > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
> > Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
> > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> > Changed: MRL- PresDet- LinkState-
> > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> > RootCap: CRSVisible-
> > RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> > DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
> > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
> > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> > Compliance De-emphasis: -6dB
> > LnkSta2: Current De-emphasis Level: -6dB
> > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
> > Address: 00000000 Data: 0000
> > Capabilities: [90] Subsystem: Dell Device 0410
> > Capabilities: [a0] Power Management version 2
> > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > Kernel modules: shpchp
> >
> > 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) (prog-if 00 [Normal decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0, Cache Line Size: 64 bytes
> > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> > I/O behind bridge: 00004000-00004fff
> > Memory behind bridge: f2c00000-f3ffffff
> > Prefetchable memory behind bridge: 00000000fe700000-00000000fe8fffff
> > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
> > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> > ExtTag- RBE+ FLReset-
> > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> > MaxPayload 128 bytes, MaxReadReq 128 bytes
> > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> > LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
> > ClockPM- Surprise- LLActRep+ BwNot-
> > LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
> > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
> > Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
> > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> > Changed: MRL- PresDet+ LinkState+
> > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> > RootCap: CRSVisible-
> > RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> > DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
> > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
> > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> > Compliance De-emphasis: -6dB
> > LnkSta2: Current De-emphasis Level: -6dB
> > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
> > Address: 00000000 Data: 0000
> > Capabilities: [90] Subsystem: Dell Device 0410
> > Capabilities: [a0] Power Management version 2
> > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > Kernel modules: shpchp
> >
> > 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) (prog-if 00 [Normal decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0, Cache Line Size: 64 bytes
> > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> > I/O behind bridge: 00003000-00003fff
> > Memory behind bridge: f1800000-f2bfffff
> > Prefetchable memory behind bridge: 00000000fe500000-00000000fe6fffff
> > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
> > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> > ExtTag- RBE+ FLReset-
> > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> > MaxPayload 128 bytes, MaxReadReq 128 bytes
> > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> > LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
> > ClockPM- Surprise- LLActRep+ BwNot-
> > LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
> > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
> > Slot #2, PowerLimit 10.000W; Interlock- NoCompl+
> > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
> > Changed: MRL- PresDet+ LinkState+
> > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> > RootCap: CRSVisible-
> > RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> > DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
> > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
> > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> > Compliance De-emphasis: -6dB
> > LnkSta2: Current De-emphasis Level: -6dB
> > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
> > Address: 00000000 Data: 0000
> > Capabilities: [90] Subsystem: Dell Device 0410
> > Capabilities: [a0] Power Management version 2
> > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > Kernel modules: shpchp
> >
> > 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) (prog-if 00 [Normal decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0, Cache Line Size: 64 bytes
> > Bus: primary=00, secondary=04, subordinate=09, sec-latency=0
> > I/O behind bridge: 00002000-00002fff
> > Memory behind bridge: f0400000-f17fffff
> > Prefetchable memory behind bridge: 00000000fe300000-00000000fe4fffff
> > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
> > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
> > ExtTag- RBE+ FLReset-
> > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> > MaxPayload 128 bytes, MaxReadReq 128 bytes
> > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
> > LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
> > ClockPM- Surprise- LLActRep+ BwNot-
> > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> > LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
> > Slot #3, PowerLimit 10.000W; Interlock- NoCompl+
> > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
> > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> > Changed: MRL- PresDet- LinkState-
> > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
> > RootCap: CRSVisible-
> > RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> > DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
> > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
> > LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
> > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> > Compliance De-emphasis: -6dB
> > LnkSta2: Current De-emphasis Level: -6dB
> > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
> > Address: 00000000 Data: 0000
> > Capabilities: [90] Subsystem: Dell Device 0410
> > Capabilities: [a0] Power Management version 2
> > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > Kernel modules: shpchp
> >
> > 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
> > Subsystem: Dell Device 0410
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Interrupt: pin A routed to IRQ 11
> > Region 0: Memory at f5450000 (32-bit, non-prefetchable)
> > Capabilities: [50] Power Management version 2
> > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > Capabilities: [58] Debug port: BAR=1 offset=00a0
> > Capabilities: [98] PCI Advanced Features
> > AFCap: TP+ FLR+
> > AFCtrl: FLR-
> > AFStatus: TP-
> >
> > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
> > I/O behind bridge: 0000f000-00000fff
> > Memory behind bridge: fff00000-000fffff
> > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> > Capabilities: [50] Subsystem: Dell Device 0410
> >
> > 00:1f.0 ISA bridge: Intel Corporation 5 Series/3400 Series Chipset LPC Interface Controller (rev 05)
> > Subsystem: Dell Device 0410
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Capabilities: [e0] Vendor Specific Information: Len=10 <?>
> > Kernel modules: iTCO_wdt
> >
> > 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
> > Subsystem: Dell Device 0410
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Interrupt: pin C routed to IRQ 10
> > Region 0: I/O ports at 6090
> > Region 1: I/O ports at 6080
> > Region 2: I/O ports at 6070
> > Region 3: I/O ports at 6060
> > Region 4: I/O ports at 6020
> > Region 5: Memory at f5440000 (32-bit, non-prefetchable)
> > Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
> > Address: fee0500c Data: 4161
> > Capabilities: [70] Power Management version 3
> > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
> > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> > Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
> > Capabilities: [b0] PCI Advanced Features
> > AFCap: TP+ FLR+
> > AFCtrl: FLR-
> > AFStatus: TP-
> >
> > 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
> > Subsystem: Dell Device 0410
> > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Interrupt: pin C routed to IRQ 10
> > Region 0: Memory at f5430000 (64-bit, non-prefetchable)
> > Region 4: I/O ports at 6000
> > Kernel modules: i2c-i801
> >
> > 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
> > Subsystem: Dell Device 0410
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0
> > Interrupt: pin C routed to IRQ 10
> > Region 0: Memory at f5420000 (64-bit, non-prefetchable)
> > Capabilities: [50] Power Management version 3
> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> > Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
> > Address: 00000000 Data: 0000
> >
> > 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)
> > Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0, Cache Line Size: 64 bytes
> > Interrupt: pin A routed to IRQ 11
> > Region 0: Memory at f2c00000 (64-bit, non-prefetchable)
> > Capabilities: [c8] Power Management version 3
> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> > Address: 00000000fee0f00c Data: 41b1
> > Capabilities: [e0] Express (v1) Endpoint, MSI 00
> > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
> > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
> > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
> > MaxPayload 128 bytes, MaxReadReq 128 bytes
> > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
> > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us
> > ClockPM+ Surprise- LLActRep- BwNot-
> > LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
> > ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> > Kernel modules: iwlagn
> >
> > 03:00.0 SD Host controller: Ricoh Co Ltd Device e822 (rev 01)
> > Subsystem: Dell Device 0410
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0, Cache Line Size: 64 bytes
> > Interrupt: pin A routed to IRQ 10
> > Region 0: Memory at f1830000 (32-bit, non-prefetchable)
> > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
> > Address: 0000000000000000 Data: 0000
> > Capabilities: [78] Power Management version 3
> > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
> > Capabilities: [80] Express (v1) Endpoint, MSI 00
> > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
> > ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset-
> > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
> > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> > MaxPayload 128 bytes, MaxReadReq 512 bytes
> > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
> > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
> > ClockPM+ Surprise- LLActRep- BwNot-
> > LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
> > ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> > Kernel modules: sdhci-pci
> >
>
>
> --
> John W. Linville Someday the world will need a hero, and you
> linville@...driver.com might be all we have. Be ready.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists