[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20101229103758.GU14221@pengutronix.de>
Date: Wed, 29 Dec 2010 11:37:58 +0100
From: Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>
To: Shawn Guo <shawn.guo@...escale.com>
Cc: Baruch Siach <baruch@...s.co.il>, davem@...emloft.net,
gerg@...pgear.com, eric@...rea.com, bryan.wu@...onical.com,
r64343@...escale.com, B32542@...escale.com, lw@...o-electronics.de,
w.sang@...gutronix.de, s.hauer@...gutronix.de,
linux-arm-kernel@...ts.infradead.org, netdev@...r.kernel.org
Subject: Re: [PATCH 03/10] net/fec: add mac field into platform data and
consolidate fec_get_mac
Hello,
On Wed, Dec 29, 2010 at 06:30:15PM +0800, Shawn Guo wrote:
> Sorry, Baruch. I missed two comments in the last reply.
>
> On Wed, Dec 29, 2010 at 08:53:30AM +0200, Baruch Siach wrote:
> > Hi Shawn,
> >
> > Please add netdev@...r.kernel.org to the Cc of all your fec driver patches.
> >
> I was aware of this after I sent out the patch set last night.
> Can I just resend all the patches in v2 and get netdev@...r.kernel.org
> included?
[I just added netdev for this reply. I think adding it for v2 is OK
then. For those interested, the whole series can be found at
http://thread.gmane.org/gmane.linux.ports.arm.kernel/100902
.]
> > On Tue, Dec 28, 2010 at 10:55:48PM +0800, Shawn Guo wrote:
> [...]
> > > + /*
> > > + * try to get mac address in following order:
> > > + *
> > > + * 1) kernel command line fec_mac=xx:xx:xx...
> > > + */
> > > + iap = fec_mac_default;
> > > +
> > > + /*
> > > + * 2) from flash or fuse (via platform data)
> > > + */
> >
> > Again, how do you handle the dual MAC case?
> >
> For the platform data case, the following patch reads both mac
> addresses.
>
> [PATCH 09/10] ARM: mx28: read fec mac address from ocotp
>
> +static int __init mx28evk_fec_get_mac(void)
> +{
> + int i, ret;
> + u32 val;
> +
> + /*
> + * OCOTP only stores the last 4 octets for each mac address,
> + * so hard-coding the first two octets as Freescale OUI (00:04:9f)
> + * is needed.
> + */
> + for (i = 0; i < 2; i++) {
> + ret = mxs_read_ocotp(0x20 + i * 0x10, 1, &val);
> + if (ret)
> + goto error;
> +
> + mx28_fec_pdata[i].mac[0] = 0x00;
> + mx28_fec_pdata[i].mac[1] = 0x04;
> + mx28_fec_pdata[i].mac[2] = (val >> 24) & 0xff;
> + mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
> + mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
> + mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
uuh. Is ((val >> 24) & 0xff) supposed to be 0x9f? If not this might
have unwanted effects (practical, don't know about legal ones).
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists