netdev - Re: Sky2 - problems with VLANs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20101231101303.6caed8ab@s6510>
Date:	Fri, 31 Dec 2010 10:13:03 -0800
From:	Stephen Hemminger <shemminger@...tta.com>
To:	David <david@...olicited.net>
Cc:	netdev@...r.kernel.org,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: Sky2 - problems with VLANs - kernel 2.6.36

On Fri, 05 Nov 2010 23:06:14 +0000
David <david@...olicited.net> wrote:

> I've just installed a Lycom dual port gigabit ethernet card, picked up
> as follows :-
> 
> 03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8062 PCI-E
> IPMI Gigabit Ethernet Controller (rev 14)
>     Subsystem: Marvell Technology Group Ltd. Device 6222
>     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
>     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>     Latency: 0, Cache Line Size: 64 bytes
>     Interrupt: pin A routed to IRQ 41
>     Region 0: Memory at fe8fc000 (64-bit, non-prefetchable) [size=16K]
>     Region 2: I/O ports at c800 [size=256]
>     Expansion ROM at fe8c0000 [disabled] [size=128K]
>     Capabilities: <access denied>
>     Kernel driver in use: sky2
>     Kernel modules: sky2
> 
> I'm having a problem with VLANs. Outgoing packets are tagged correctly
> and devices on the VLAN are responding. Unfortunately all of the
> response packets stay on the raw device and are not allocated to the VLAN.
> 
> I've done some investigation (printks etc.), and have found that neither
> of the following cases in sky2_status_intr() are being triggered...
> 
>                 case OP_RXVLAN:
>                         printk("RXVLAN, length=%u, status=%u\n", length,
> status);
>                         sky2->rx_tag = length;
>                         break;
> 
>                 case OP_RXCHKSVLAN:
>                         printk("RXCHKSVLAN, length=%u, status=%u\n",
> length, status);
>                         sky2->rx_tag = length;
>                         /* fall through */
> 
> ... however the status when calling sky2_skb_rx() does have GMR_FS_VLAN
> set, it's just we haven't been able to find out which VLAN the packet
> comes from (and sky2->rx_tag is zero). Does anyone have any suggestions
> as to how I proceed from here? I'm happy to test patches etc.

Did it work with older kernels? 
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html